• Setup Menus
• BUTTON/DIAL SETTING

Enter a search term and click .

Access options for camera controls.

---

---

FOCUS LEVER SETTING

Choose the functions performed by pressing the center of the focus stick (focus lever) or by pressing the stick up, down, left, or right.

PUSH

Option	Description
OFF	Pressing the center of the stick has no effect.
EDIT FOCUS AREA	Press the center of the stick to choose the focus area size. If gFACE/EYE DETECTION SETTING or SUBJECT DETECTION SETTING is on, you can instead position the focus frame over the desired face, eye, animal, or object.
ZOOM	Press the center of the stick to zoom in on the active focus area (aChecking Focus).
RESET TO CENTER	Press the center of the stick to select the center focus area.

TILTo

Option	Description
OFF	Pressing the stick up, down, left, or right has no effect.
DIRECT AF POINT SELECTION	Choose the focus area without leaving the shooting display.
EDIT FOCUS AREA	Press the stick up, down, left, or right to view a focus-area display and choose the focus area.

xEDIT/SAVE QUICK MENU

Choose the items displayed in the quick menu during still photography (aThe Quick Menu).

FEDIT/SAVE QUICK MENU

Choose the items displayed in the quick menu when filming movies (aThe Quick Menu).

FUNCTION (Fn) SETTING

Choose the roles played by the function buttons (aFunction Controls).

POWER ZOOM LENS FUNCTION (Fn) SETTING

Choose the roles played by the function buttons available on some power zoom lenses (aLens Function Buttons).

COMMAND DIAL SETTING

The functions of the front command dials and the rear command dial can be configured for each shooting mode.

1. Select DBUTTON/DIAL SETTING > COMMAND DIAL SETTING.

2. Select a shooting mode.

   

3. Select the command dial to configure.

   

   FRONT COMMAND DIAL 1

   Option
   Y1	FRONT COMMAND DIAL 1
   Y2	FRONT COMMAND DIAL 2
   Y3	FRONT COMMAND DIAL 3
   Y4	FRONT COMMAND DIAL 4
   X	REAR COMMAND DIAL

   Front command dial settings can be saved to FRONT COMMAND DIAL 1, FRONT COMMAND DIAL 2, FRONT COMMAND DIAL 3, and FRONT COMMAND DIAL 4.

4. Select the function to assign.

   Assignable functions vary depending on the shooting mode.

   

   Shooting Mode	Function
   P	PROGRAM SHIFT EXPOSURE COMPENSATION ISO FILM SIMULATION NONE
   S	S.S. EXPOSURE COMPENSATION ISO FILM SIMULATION NONE
   A	APERTURE EXPOSURE COMPENSATION ISO FILM SIMULATION NONE
   M	S.S. APERTURE EXPOSURE COMPENSATION ISO FILM SIMULATION NONE

   APERTURE applies if the lens has no aperture ring or if an aperture ring with an “A” position is in the A position.

   When the shooting mode is M, EXPOSURE COMPENSATION only applies if the ISO sensitivity is set to AUTO.

oS.S. OPERATION

Select OFF to disable shutter-speed fine-tuning using the command dials.

Options
ON	OFF

COMMAND DIAL DIRECTION

Choose the direction in which the command dials are rotated to choose values. Settings for the front and rear command dials can be adjusted separately.

Option	Description
	Rotate the dial right for higher values or to move to the next item.
	Rotate the dial left for higher values or to move to the next item.

SHUTTER AF

Choose whether the camera focuses when the shutter button is pressed halfway.

AF-S

Option	Description
ON	Focus locks when the shutter button is pressed halfway.
OFF	No focus operation is performed when the shutter button is pressed halfway.

AF-C

Option	Description
ON	The camera focuses while the shutter button is pressed halfway.
OFF	No focus operation is performed when the shutter button is pressed halfway.

SHUTTER AE

If ON is selected, exposure will lock while the shutter button is pressed halfway. The setting for focus mode CONTINUOUS AF (AF-C) can be adjusted separately from that for modes SINGLE AF (AF-S) and MANUAL FOCUS.

Options
ON	OFF

SHOOT WITHOUT LENS

Choose ON to enable the shutter release when no lens is attached.

Options
ON	OFF

SHOOT WITHOUT CARD

Choose whether the shutter can be released without a memory card inserted in the camera.

Option	Description
ON	When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed.
OFF	The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.

LENS ZOOM/FOCUS SETTING

Adjust settings for compatible lenses with focus rings or power zoom.

FOCUS RING ROTATE

Choose the direction in which the focus ring is rotated to increase the focus distance.

Options
XCW (clockwise)	YCCW (counterclockwise)

xFOCUS RING OPERATION

Adjust settings for the focus shift when operating the focus ring during still photography.

NONLINEAR

Focus is adjusted at the same rate as the ring is rotated.

LINEAR

Focus is adjusted linearly according to the amount the ring is rotated. The rotation angle of the focus ring can also be set when focusing between the minimum focus distance and infinity.

Option	Description
DEFAULT	Disable the settings for the maximum rotation angle of the focus ring. The maximum rotation angle varies depending on the lens.
90°/180°/270°/360°	Set the maximum rotation angle of the focus ring. Select CUSTOM 1, CUSTOM 2, or CUSTOM 3 to set the rotation angle from 60° to 900° in 10° increments.
CUSTOM 1 CUSTOM 2 CUSTOM 3

FFOCUS RING OPERATION

Adjust settings for the focus shift when operating the focus ring during movie recording.

NONLINEAR

Focus is adjusted at the same rate as the ring is rotated.

LINEAR

Focus is adjusted linearly according to the amount the ring is rotated. The rotation angle of the focus ring can also be set when focusing between the minimum focus distance and infinity.

Option	Description
DEFAULT	Disable the settings for the maximum rotation angle of the focus ring. The maximum rotation angle varies depending on the lens.
90°/180°/270°/360°	Set the maximum rotation angle of the focus ring. Select CUSTOM 1, CUSTOM 2, or CUSTOM 3 to set the rotation angle from 60° to 900° in 10° increments.
CUSTOM 1 CUSTOM 2 CUSTOM 3

FCONSTANT SPEED FOCUS (Fn)

Choose the rate at which the focus distance changes when adjusted using function buttons during manual focus with compatible power zoom lenses. The higher the number, the higher the rate.

Options
1(SLOW)	2	3	4	5	6	7	8(FAST)

CONSTANT SPEED ZOOM (Fn)

Choose the rate at which compatible power zoom lenses can be zoomed in or out using function buttons. The higher the number, the higher the rate.

Options
1(SLOW)	2	3	4	5	6	7	8(FAST)

CONSTANT SPEED ZOOM/FOCUS (Fn) OPERATION

Choose whether the function buttons on compatible power zoom lenses need only be pressed once to start and stop power focus or power zoom.

Option	Description
START/STOP SWITCH	The operation starts when the button is pressed and stops when it is pressed a second time.
ACTIVE WHILE PRESSING	The operation continues while the button is pressed and stops when the button is released.

ZOOM RING ROTATE

Choose whether to reverse the rotation of the zoom ring on compatible power zoom lenses.

Options
XCW (clockwise)	YCCW (counterclockwise)

ZOOM/FOCUS CONTROL RING

Choose role played by the zoom/focus control ring on compatible power zoom lenses.

Options
ZOOM	FOCUS

AE/AF-LOCK MODE

This option determines the behavior of the button to which exposure and/or focus lock is assigned.

Option	Description
AE&AF ON WHEN PRESSING	Exposure and/or focus will lock while the button is pressed.
AE&AF ON/OFF SWITCH	Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again.

AWB-LOCK MODE

Choose the behavior of function buttons assigned auto white balance (AWB) lock. Auto white balance lock is used to lock white balance at the value metered by the camera when WAWHITE PRIORITY, AUTO, or AAAMBIENCE PRIORITY is selected for white balance.

Option	Description
AWB ON WHEN PRESSING	Auto white balance locks while the button is pressed.
AWB ON/OFF SWITCH	Press the button once to lock auto white balance and again to end the lock.

aREC BUTTON SETTING

Choose the role performed by the t (movie recording) button during playback.

Option	Description
aSMARTPHONE TRANSFER ORDER	Pressing the button marks the current picture for transfer. If the camera is not currently paired with a smartphone, Bluetooth/SMARTPHONE SETTING options will be displayed.
dSELECT & SMARTPHONE TRANSFER ORDER	Pressing the button displays a dialog where pictures can be selected for upload to a smartphone with which the camera is paired (aTRANSFER IMAGE TO SMARTPHONE). If the camera is not currently paired with a smartphone, Bluetooth/SMARTPHONE SETTING options will be displayed instead.
HFrame.io TRANSFER ORDER	Pressing the button marks the current picture for upload to Frame.io.
rWIRELESS COMMUNICATION	The button can be used for wireless connections.
IPROTECT	Protect the image.

TOUCH SCREEN SETTING

Enable or disable touch-screen controls.

xTOUCH SCREEN SETTING

Option	Description
ON	The LCD monitor functions as a touch screen during shooting.
OFF	Touch controls disabled.

xDOUBLE TAP SETTING

Option	Description
ON	Tap the LCD monitor twice to zoom in on your subject during shooting.
OFF	Touch zoom disabled.

cTOUCH FUNCTION

Option	Description
ON	Enable touch-function gestures.
OFF	Disable touch-function gestures.

TOUCH ZOOM

Option	Description
ON	If the lens supports touch zoom, you can zoom in and out by touching the LCD monitor (aTouch Zoom).
OFF	Touch zoom disabled.

aTOUCH SCREEN SETTING

Option	Description
ON	The LCD monitor functions as a touch screen during playback.
OFF	Touch controls disabled.

LOCK

Lock selected controls to prevent unintended operation.

LOCK SETTING

Choose from the following:

Option	Description
UNLOCK	Reset lock options.
ALL FUNCTION	Lock all controls in the FUNCTION SELECTION list.
SELECTED FUNCTION	Lock only the controls selected in the FUNCTION SELECTION list.

FUNCTION SELECTION

Choose the controls locked when SELECTED FUNCTION is chosen for LOCK SETTING.