The roles played by each of the function buttons can be selected by pressing and holding the button.
The functions assigned to T-Fn1 through T-Fn4 can be accessed by flicking the monitor.
The default assignments are:
|T-Fn1 (flick up)|
|T-Fn2 (flick left)|
|T-Fn3 (flick right)|
|T-Fn4 (flick down)|
|Center of rear command dial|
To assign roles to the buttons:
Press and hold the DISP/BACK button until a button selection menu is displayed.
Highlight a button and press MENU/OK.
Highlight the desired role and press MENU/OK to assign it to the selected button. Choose from:
SELECT CUSTOM SETTING
AF-C CUSTOM SETTINGS
FACE/EYE DETECTION SETTING
AE BKT SETTING
FLASH FUNCTION SETTING
MIC LEVEL ADJUSTMENT
PREVIEW DEPTH OF FIELD
PREVIEW EXP./WB IN MANUAL MODE
PREVIEW PIC. EFFECT
LARGE INDICATORS MODE
AE LOCK ONLY
AF LOCK ONLY
AUTO IMAGE TRANSFER
NONE (control disabled)
Button assignments can also be selected using BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING.
AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4).
If AF‑ON is selected, you can press the control instead of keeping the shutter button pressed halfway.
If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).
If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for FLASH SETTING > TTL-LOCK MODE (TTL-LOCK MODE).