Exposure compensation dial
Auto mode selector lever
Shutter speed dial
Focus mode selector
Lens signal contacts
Lens release button
Front command dial
Function button (Fn1)
Microphone/remote release connector (Φ 2.5 mm)
HDMI Micro connector (Type D)
Micro USB (Micro-B)
USB 2.0 connector
Diopter adjustment control
Electronic viewfinder (EVF)
VIEW MODE button
(delete) button (playback mode)
AE-L (exposure lock) button
Rear command dial
Focus stick (focus lever)
AF-L (focus lock) button
Q (quick menu) button
DISP (display)/BACK button
Cable channel cover for DC coupler
Battery-chamber cover latch
Serial number plate
Memory card slot
Do not remove the serial number plate, which provides the FCC ID, KC mark, serial number, and other important information.
Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus.
The shutter speed dial is used to choose the shutter speed.
Rotate the dial to choose an exposure compensation amount.
Pressing the DRIVE button displays drive mode options, where you can choose from the following the drive modes.
|STILL IMAGE (Taking Photographs (Mode P))
|CONTINUOUS (Continuous Shooting (Burst Mode))
|AE BKT (Bracketing)
|ISO BKT (Bracketing)
|FILM SIMULATION BKT (Bracketing)
|WHITE BALANCE BKT (Bracketing)
|DYNAMIC RANGE BKT (Bracketing)
|MULTIPLE EXPOSURE (Multiple Exposures)
|ADVANCED FILTER (Advanced Filters)
|MOVIE (Recording Movies)
Switch between auto and manual modes.
Select from P (program AE), S (shutter-priority AE), A (aperture-priority AE), and M (manual) modes. Adjust shutter speed and aperture using program shift (mode P) or set shutter speed and/or aperture manually (modes S, A, and M).
Auto mode. The camera adjusts settings automatically according to the option selected by rotating the front command dial. Choose from modes suited to specific subject types, or select ADVANCED SR AUTO to let the camera automatically match the mode to the subject. Scene selection is not available in Adv. or drive modes.
Restrictions may apply to camera settings depending on the mode and shooting conditions.
Rotate or press the command dials to perform the operations listed below.
Select menu tabs or page through menus.
Select a scene when shooting in auto mode.
Select an advanced filter when shooting with (ADVANCED FILTER) selected in auto mode.
Adjust exposure compensation when C is selected with exposure compensation dial.
Adjust sensitivity (ON selected for ISO COMMAND DIAL SETTING).
View other pictures during playback.
|Switch back and forth between aperture and exposure compensation when C is selected with the exposure compensation dial, or between aperture, exposure compensation, and sensitivity when C is selected with the exposure compensation dial and ISO COMMAND SETTING is ON.
Highlight menu items.
Choose the desired combination of shutter speed and aperture (program shift).
Choose a shutter speed.
Adjust settings in the quick menu.
Choose the size of the focus frame.
Zoom in or out during focus zoom or in full frame or multi-frame playback.
Perform the function assigned to the DIAL function button.
Press and hold to choose the manual focus mode focus display.
Zoom in on the active focus point during playback.
When the viewfinder is not in use, camera status is shown by the indicator lamp.
|Focus or slow shutter speed warning. Pictures can be taken.
|Blinks green and orange
Camera on: Recording pictures. Additional pictures can be taken.
Camera off: Uploading pictures to a smartphone or tablet.
|Recording pictures. No additional pictures can be taken at this time.
|Flash charging; flash will not fire when picture is taken.
|Lens or memory error.
Warnings may also appear in the display.
The LCD monitor also functions as a touch screen that can be used for:
Focus area selection
Full-frame playbackTouch Screen Mode
The camera is equipped with diopter adjustment in the range −4 to +2 m–1 to accommodate individual differences in vision. Rotate the diopter adjustment control until the viewfinder display is in sharp focus.