Enter a search term and click .

The parts of the camera are listed below.

ARear command dial

BFn1 button

CON/OFF button

DMode dial

EHot shoe


GStrap eyelet

HN (flash pop-up) switch

IConnector cover

JLens signal contacts

KLens release button


MAF-assist illuminator
Self-timer lamp

NFront command dial

OShutter button

PMicrophone/remote release connector (⌀2.5 mm)

QBattery chamber

RMemory card slot

SBattery latch

TBody cap

UVari-angle LCD monitor
Touch screen

VDRIVE button
b (delete) button (playback mode)

Wa (playback) button

XIndicator lamp

YFocus stick (focus lever)

ZConnector cover

aMENU/OK button

bDISP (display)/BACK button

cCable channel cover for DC coupler

dBattery-chamber cover latch

eBattery-chamber cover

fTripod mount


hHDMI Micro connector (Type D)

iUSB connector (Type C)

jSerial number plate

The Serial Number Plate

Do not remove the serial number plate, which provides the FCC ID, KC mark, CMIIT ID, serial number, and other important information.

The Mode Dial

To select a shooting mode, rotate the dial until the icon for the desired mode aligns with the index.

Mode Description


The camera automatically optimizes settings to the scene.


Aperture and shutter speed can be adjusted using program shift.


Select for full control over camera settings, including aperture (M and A) and/or shutter speed (M and S).


Follow an on-screen guide to create a panorama.


Choose a scene suited to the subject or shooting conditions and let the camera do the rest.


Take photos with filter effects.

The Focus Stick (Focus Lever)

Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus.

Use DBUTTON SETTING > FOCUS LEVER SETTING to choose the role played by the focus stick (aFOCUS LEVER SETTING).

The DRIVE Button

Pressing the DRIVE button displays drive mode options, where you can choose from the following the drive modes.

The Command Dials

The rear and front command dials are used for the operations below.


Choose the desired combination of shutter speed and aperture (program shift).

Adjust aperture.

Choose a shutter speed.

Menus Select menu tabs or page through menus.
Q Menu Adjust settings in the quick menu.
Playback View other pictures.


Choose a shutter speed.

Adjust exposure compensation.

Menus Highlight menu items.
Q Menu Adjust settings in the quick menu.

Zoom in or out (full-frame playback).

Zoom in or out (multi-frame playback).

The Indicator Lamp

The indicator lamp shows camera status as follows:

Indicator lamp Camera status
Glows green Focus locked.
Blinks green Focus or slow shutter speed warning. Pictures can be taken.
Blinks green and orange

Camera on: Recording pictures. Additional pictures can be taken.

Camera off: Uploading pictures to a smartphone or tablet (Displayed only if pictures are selected for upload.).

Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks orange Flash charging; flash will not fire when picture is taken.
Blinks red Lens or memory error.

Warnings may also appear in the display.

The LCD Monitor

The LCD monitor can be tilted or reversed for ease of viewing. You will find this feature particularly helpful when shooting self-portraits (aSelf-Portraits (Selfies)). Be careful not to catch your fingers or other objects between the monitor and the camera body.

The LCD monitor also functions as a touch screen (aTouch Screen Mode).