[TIME CODE SETTING] (Movie Recording)
Adjust time code (hour, minute, second, and frame number) display settings for movie recording.
To display focus settings, press [MENU/OK] in the shooting display and select the Q ([TIME CODE SETTING]) tab.
The options available vary with the shooting mode selected.
[TIME CODE DISPLAY]
Select [ON] to display time codes during movie recording and playback.
[START TIME SETTING]
Choose the time code starting time.
|[MANUAL INPUT]||Highlight this option and press the selector right to choose a start time manually.|
|[CURRENT TIME]||Set the start time to the current time.|
|[RESET]||Set the start time to 00:00:00.|
[COUNT UP SETTING]
Choose whether time is clocked continuously or only during movie recording.
|[REC RUN]||Time is clocked only during movie recording.|
|[FREE RUN]||Time is clocked continuously.|
At frame rates of [59.94P], and [29.97P], a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code.
|[ON]||The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time.|
|[OFF]||Frames are not dropped.|
The time code display varies with the option selected.
Selecting a frame rate of [23.98P] disables frame drop.
[HDMI TIME CODE OUTPUT]
Choose whether time codes are output to HDMI devices.