Follow an on-screen guide to create a panorama.
Rotate the drive dial to u.
To select the size of the angle through which you will pan the camera while shooting, press the selector left. Highlight a size and press [MENU]/[OK].
Press the selector right to view a choice of pan directions. Highlight a pan direction and press [MENU]/[OK].
Press the shutter button all the way down to start recording. There is no need to keep the shutter button pressed during recording.
Pan the camera in the direction shown by the arrow. Shooting ends automatically when the camera is panned to the end of the guides and the panorama is complete.
For Best Results
For best results, use a lens with a focal length of 35 mm or less (50 mm or less in 35 mm format). Prop your elbows against your sides and move the camera slowly in a small circle at a steady speed, keeping the camera parallel or at right angles to the horizon and being careful only to pan in the direction shown by the guides. Use a tripod for best results. If the desired results are not achieved, try panning at a different speed.
If the shutter button is pressed all the way down before the panorama is complete, shooting will end and no panorama may be recorded.
The last part of the panorama may not be recorded if shooting ends before the panorama is complete.
Panoramas are created from multiple frames, and the camera may in some cases be unable to stitch the frames together perfectly.
Panoramas may be blurred if the subject is poorly lit.
Shooting may be interrupted if the camera is panned too quickly or too slowly. Panning the camera in a direction other than that shown cancels shooting.
The camera may in some cases record a greater or lesser angle than selected.
The desired results may not be achieved with:
- Moving subjects
- Subjects close to the camera
- Unvarying subjects such as the sky or a field of grass
- Subjects that are in constant motion, such as waves and waterfalls
- Subjects that undergo marked changes in brightness
if [ON] is selected for D[BUTTON/DIAL SETTING] > [SHUTTER AE], exposure for the entire panorama is determined by the first frame.
With the panorama displayed full frame, press the selector down to start panorama playback. Vertical panoramas will scroll vertically, horizontal panoramas horizontally.
In full-frame playback, you can use the rear command dial to zoom panoramas in or out.
Panorama playback is controlled using the multi selector.
|Full-frame playback||Panorama playback||Panorama playback paused|
|Start playback||Pause playback||Resume playback|
(Press left or right)
|View other pictures||Choose pan direction||Scroll panorama manually|