Make changes to display settings.
To access display settings, press [MENU]/[OK], select the ([SET UP]) tab, and choose [SCREEN SET-UP].
Adjust the brightness of the display in the electronic viewfinder. Select [MANUAL] to choose from 13 options from +5 (bright) to −7 (dark), or select [AUTO] for automatic brightness adjustment.
Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5.
Adjust monitor brightness. Choose from 11 options between +5 and −5.
Adjust monitor hue. Choose from 11 options between +5 and −5.
Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities.
|[CONTINUOUS]||Pictures are displayed until the [MENU]/[OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom.|
|[1.5 SEC]||Pictures are displayed for the selected time or until the shutter button is pressed halfway.|
|[OFF]||Pictures are not displayed after shooting.|
Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.
Select [PREVIEW EXP./WB] to enable exposure and white balance preview in manual exposure mode, or choose [PREVIEW WB] to preview only white balance. Select [OFF] when using a flash or on other occasions on which exposure may change when the picture is taken.
|[PREVIEW EXP./WB]||[PREVIEW WB]||[OFF]|
Choose [ON] to preview the effects of film simulation, white balance, and other settings in the monitor, [OFF] to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible.
If [OFF] is selected, the effects of camera settings will not be visible in the monitor and colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings.
Choose a framing grid for shooting mode.
|[GRID 9]||[GRID 24]||[HD FRAMING]|
|For “rule of thirds” composition.||A six-by-four grid.||Frame HD pictures in the crop shown by the lines at the top and bottom of the display.|
Framing guides are not shown at default settings but can be displayed using [SCREEN SET-UP] > [DISP. CUSTOM SETTING] ([DISP. CUSTOM SETTING]).
Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.
Choose the units used for the focus distance indicator.
Choose the content of the two windows in the dual display.
|[R:FOCUS L:FRAME]||The right (small) window shows a close-up of the focus area, while the left (large) window shows the entire frame.|
|[R:FRAME L:FOCUS]||The right (small) window shows the entire frame, while the left (large) window shows a close-up of the focus area.|
Choose the items shown in the standard display.
In shooting mode, press [DISP]/[BACK] until standard indicators are displayed.
Press [MENU]/[OK] and select [SCREEN SET-UP] > [DISP. CUSTOM SETTING] in the ([SET UP]) tab.
Highlight items and press [MENU]/[OK] to select or deselect.
|[AF DISTANCE INDICATOR]|
|[MF DISTANCE INDICATOR]|
|[Expo. Comp. (Digit)]|
|[Expo. Comp. (Scale)]|
|[DUAL IS MODE]|
|[MOVIE MODE & REC. TIME]|
Press [DISP]/[BACK] to save changes.
Press [DISP]/[BACK] as needed to exit the menus and return to the shooting display.