Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
Rotate the drive dial to select the overall frame advance rate from [CH] (high), [CM] (medium), and [CL] (low).
If you selected [CH] or [CL] in Step 1, use [SHOOTING SETTING] > [DRIVE SETTING] to choose the frame rate (in [CM] mode, the camera shoots at about 6 fps).
This feature can also be accessed via shortcuts (Shortcut Options).
Keep the shutter button pressed to take photos at the rate selected in Step 2.
Shooting ends when the shutter button is released or the memory card is full.
If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder.
Burst shooting may not begin if the space available on the memory card is insufficient.
Frame rate varies with the subject, shutter speed, sensitivity, and focus mode. Frame rates may slow and recording times increase as more shots are taken. The flash may or may not fire, depending on shooting conditions.
Focus and Exposure
Select focus mode [C] to vary focus with shot; to vary exposure with each shot, select [OFF] for [BUTTON/DIAL SETTING] > [SHUTTER AE].
Selecting [CH] in focus mode [C] restricts the choice of focus frames.
Exposure and focus tracking performance may vary with such factors as aperture, sensitivity, and exposure compensation.