Automatically vary settings over a series of pictures.
Rotate the drive dial to [BKT].
Navigate to [DRIVE SETTING] > [BKT SETTING] in the [SHOOTING SETTING] menu and select [AE BKT], [ISO BKT], [FILM SIMULATION BKT], [WHITE BALANCE BKT], [DYNAMIC RANGE BKT], or [FOCUS BKT].
This feature can also be accessed via shortcuts (Shortcut Options).
Choose the number of shots in the bracketing sequence and the order in which the shots are taken. You can also choose the amount exposure is varied with each shot and whether the shots are taken one at a time or in a single burst.
Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.
Select a bracketing amount (±1/3, ±2/3, or ±1). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount.
[FILM SIMULATION BKT]
Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings.
[WHITE BALANCE BKT]
Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.
[DYNAMIC RANGE BKT]
Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third.
While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends.
Each time the shutter button is pressed, the camera takes a series of photos, varying focus with each shot. The number of shots, the amount focus changes with each shot, and the interval between shots can be selected using [SHOOTING SETTING] > [DRIVE SETTING] > [BKT SETTING] > [FOCUS BKT].
Settings for exposure, sensitivity, film simulation, white balance bracketing, and focus bracketing can be adjusted using [SHOOTING SETTING] > [DRIVE SETTING] > [BKT SETTING] ([BKT SETTING]).