Enter a search term and click .

AFn1button

BExposure compensation dial

CShutter button

DShutter speed dial/Sensitivity dial

EAF-assist illuminator
Self-timer lamp

FHot shoe

GMicrophone

HFlash

IViewfinder window

JHot shoe cover

KLens cap

LStrap eyelet

MFocus mode selector

NAperture ring

OControl ring
Focus ring

PLens

QFn2button

RViewfinder selector

SFront command dial

TON/OFF switch


UDiopter adjustment control

VViewfinder window

WEye sensor

XDRIVE/DELETE button

YAEL (exposure lock)/AFL (focus lock) button

ZFocus stick (focus lever)

aRear command dial

bIndicator lamp

cQ(quick menu) button

dConnector cover

eMENU/OK button

fPLAY(playback) button

gDISP(display)/BACKbutton

hCable channel cover for DC coupler

iBattery-chamber cover latch

jBattery-chamber cover

kTripod mount

lSpeaker

mLCD monitor
Touch screen

nMicrophone/remote release connector (⌀2.5 mm)

oUSB connector (Type-C)

pHDMI Micro connector (Type D)

qBattery latch

rMemory card slot

sBattery chamber

The Viewfinder Window

Use the viewfinder selector to switch between the electronic viewfinder (EVF) and the optical viewfinder (OVF). In addition, a small electronic rangefinder (ERF) window can be displayed in the OVF.

Switching Between the EVF and OVF

To switch between the EVF and OVF, pull the viewfinder selector as shown.

EVF   OVF

The camera automatically switches from the OVF to the EVF during movie recording.

Turning the ERF On and Off

To turn the ERF on or off, pull the viewfinder selector as shown while the OVF is displayed.

ERF off   ERF on

The ERF is available only whenr SINGLE POINT is selected for AF mode.

The Hybrid (EVF/OVF/ERF) Viewfinder

The features of the different displays are described below.

Display Description
OVF
  • The optical display shows the subject clearly. The subject is in sharp focus so that their expression is always visible.
  • The OVF shows the area just outside the frame, making it easier to compose shots.
  • Because the viewfinder window is a slight distance from the lens, the area visible in photographs may however differ slightly from the display in the viewfinder due to parallax.
EVF
  • The EVF offers 100% frame coverage for increased accuracy when composing shots.
  • It can be used to preview depth of field, focus, exposure, and white balance.
ERF As for the optical viewfinder but with a focus preview window.

The LCD Monitor

The LCD monitor can be tilted for easier viewing, but be careful not to touch the wires or trap fingers or other objects behind the monitor. Touching the wires could cause camera malfunction.

The Eye Sensor

  • The eye sensor may respond to objects other than your eye or to light shining directly on the sensor.
  • The eye sensor can be disabled using DSCREEN SET-UP > VIEW MODE SETTING.

Eye sensor

The Focus Stick (Focus Lever)

Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus.

The Shutter Speed Dial/Sensitivity Dial

Shutter speed can be adjusted by rotating the shutter speed dial/sensitivity dial. Lift and rotate the dial to adjust sensitivity.

Shutter speed

Sensitivity

Sensitivity

Shutter speed

The Exposure Compensation Dial

Rotate the dial to choose an exposure compensation amount.

Focusing the Viewfinder

Viewfinder focus can be adjusted by rotating the diopter adjustment control.

The DRIVE/DELETE Button

Pressing the DRIVE/DELETE button displays the drive-mode menu.

Mode
B STILL IMAGE(aTaking Photographs (Mode P))
N CONTINUOUSR(aContinuous Shooting (Burst Mode))
CH CH HIGH SPEED BURST(aContinuous Shooting (Burst Mode))
CL CL LOW SPEED BURST(aContinuous Shooting (Burst Mode))
W ISO BKT(aISO BKT)
V WHITE BALANCE BKT(aWHITE BALANCE BKT)
s BKT(aAE BKT, FILM SIMULATION BKT, DYNAMIC RANGE BKT, FOCUS BKT)
h HDR(aHDR)
Adv. Adv. MODE(aPanoramas, Multiple Exposures,Advanced Filters)
F MOVIE(aRecording Movies)

The Command Dials

Rotate or press the command dials to:

Rotate

  • Select menu tabs or page through menus
  • Adjust aperture 1、2
  • Adjust exposure compensation 2、5
  • Adjust sensitivity  2、3
  • View other pictures during playback

Press

Choose the operation performed by rotating the front command dial 2

1 Aperture set to A (auto) and COMMAND selected for DBUTTON/DIAL SETTING > APERTURE RING SETTING (A).

2 Can be changed using DBUTTON/DIAL SETTING > COMMAND DIAL SETTING.

C selected for sensitivity.

4 Available only if FOCUS CHECK is assigned to a function button.

5 Exposure compensation dial rotated to C.

Rotate

  • Highlight menu items
  • Choose the desired combination of shutter speed and aperture (program shift)
  • Choose a shutter speed 2
  • Adjust settings in the quick menu
  • Choose the size of the focus frame
  • Zoom in or out in full frame playback
  • Zoom in or out in multi-frame playback

Press

  • Perform the function assigned to the DIAL function button
  • Zoom in on the active focus point 4
  • Choose the manual focus mode focus display4
  • Zoom in on the active focus point during playback

1 Aperture set to A (auto) and COMMAND selected for DBUTTON/DIAL SETTING > APERTURE RING SETTING (A).

2 Can be changed using DBUTTON/DIAL SETTING > COMMAND DIAL SETTING.

C selected for sensitivity.

4 Available only if FOCUS CHECK is assigned to a function button.

5 Exposure compensation dial rotated to C.

The Indicator Lamp

Camera status is shown by the indicator lamp.

Indicator lamp Camera status
Glows green Focus locked.
Blinks green Focus or slow shutter speed warning. Pictures can be taken.
Blinks green and orange

Camera on: Recording pictures. Additional pictures can be taken.

Camera off: Uploading pictures to a smartphone or tablet. *

Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks red Lens or memory error.

* Displayed only if pictures are selected for upload.

Warnings may also appear in the display.

The indicator lamp remains off while your eye is to the viewfinder.

The BMOVIE SETTING > TALLY LIGHT option can be used to choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady.

The Control Ring

Use the control ring for quick access to camera functions during shooting. The function assigned to the control ring can be selected by pressing the control ring options button. Choose from:

  • STANDARD
  • WHITE BALANCE
  • FILM SIMULATION
  • DIGITAL TELE-CONV.

The function assigned to the control ring can also be selected usingDBUTTON/DIAL SETTING > CONTROL RING SETTING.

STANDARD

When STANDARD is selected, the function assigned to the control ring changes with the shooting mode.

Shooting mode Function
P, S, A, M Digital teleconverter
Advanced Filter Filter selection
Panorama/Multiple Exposure Film simulation

Regardless of the option selected, when M (manual) is chosen with the focus mode selector in shooting mode P, S, A, or M, the control ring can be used only for manual focus.

The Serial Number Plate

Do not remove the serial number plate, which provides serial number and other important information.

Serial number plate