Enter a search term and click .

Adjust movie-recording options.


To display options for movie recording, press MENU/OK in the shooting display and select the B(MOVIE SETTING) tab.

The options available vary with the shooting mode selected.

MOVIE MODE

Before shooting movies, choose the frame rate, bit rate, and frame size and aspect ratio.

  1. In the shooting menu, select BMOVIE SETTING, then highlight MOVIE MODE and press MENU/OK.

  2. Press the focus stick (focus lever) up or down to highlight the desired frame size and aspect ratio (A) and press the stick right.

    • Choose V16:9 or d17:9 for 4K movies with aspect ratios of 16 or 17 to 9.
    • Choose W16:9 or W17:9 for Full HD movies with aspect ratios of 16 or 17 to 9.
  3. Press the focus stick (focus lever) up or down to highlight a frame rate (B) and press the stick right.

    Options
    23.98P 24P 25P 29.97P 50P 59.94P
  4. Press the focus stick up or down to highlight a bit rate (C) and press MENU/OK.

    Options
    50Mbps 100Mbps 200Mbps

The choice of frame and bit rates varies with the movie mode.

FULL HD HIGH SPEED REC

Record high-frame-rate Full HD movies. High-frame-rate movies can be played back in slow motion, giving you time to view fast-moving subjects or details too fleeting for the naked eye.

Option Description
2x a59.94P F120P Record Full HD footage at frame rates of 120 or 100 fps. The movies play back at 1/2, 1/4, or 1/5 speed. Maximum recording length is 6 minutes. The footage recorded to the memory card is compressed with the goal of keeping the amount of data recorded to 200 Mbps per second.
2x a50P F100P
4x a29.97P F120P
4x a25P F100P
5x a24P F120P
5x a23.98P F120P
OFFHigh-speed recording off.

High-speed movies are recorded with no sound.

FFILM SIMULATION

Choose a film simulation effect for movie recording.

Option Description
cPROVIA/STANDARD See “FILM SIMULATION”.
dVelvia/VIVID
eASTIA/
SOFT
iCLASSIC CHROME
gPRO Neg. Hi
hPRO Neg. Std
gCLASSIC Neg.
XETERNA/CINEMA
aACROS
bMONOCHROME
fSEPIA

FMONOCHROMATIC COLOR

Add a reddish or bluish tinge (warm or cool color cast) to the aACROS and bMONOCHROME monochrome film simulations. Color can be adjusted on the WARMCOOL and G (Green)–M (Magenta) axes.

FDYNAMIC RANGE

Choose a dynamic range for movie recording.

Option Description
V100% See “DYNAMIC RANGE”.
W200%
X400%

Auto dynamic range adjustment (AUTO) is not supported.

W200% is available at sensitivities of from ISO 320 to ISO 12800, X400% at sensitivities of from ISO 640 to 12800.

The BMOVIE SETTING > FDYNAMIC RANGE option is available when OFF is selected for BMOVIE SETTING > F-Log RECORDING.

F WHITE BALANCE

Adjust white balance for movie recording.

Option Description
AUTO See “WHITE BALANCE”.
k/l/m
k
i
j
k
l
m
n
g

FTONE CURVE

With reference to a tone curve, use the focus stick (focus lever) to adjust the appearance of highlights or shadows, making them harsher or softer. Choose higher values to make shadows and highlights harsher, lower values to make them softer.

Options
-2 -1 0 +1 +2 +3 +4

FCOLOR

Adjust color density for movie recording. Choose higher values to increase saturation, lower values to reduce it.

Options
-4 -3 -2 -1 0 +1 +2 +3 +4

FSHARPNESS

Sharpen or soften outlines in movies. Choose higher values for sharper outlines, lower values for softer outlines.

Options
-4 -3 -2 -1 0 +1 +2 +3 +4

FNOISE REDUCTION

Reduce noise in movies shot at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to leave outlines visible.

Options
-4 -3 -2 -1 0 +1 +2 +3 +4

VINTERFRAME NR

Select ON to enable interframe noise reduction.

Options
ON OFF

Interframe noise reduction is available only when frame rates of 29.97P or slower are selected at a frame size of V or d.

“Ghosting” may occur with moving subjects or if the camera is moved during shooting.

F-Log RECORDING

Select ON to record movies using a soft gamma curve with a wide gamut suitable for further processing post-production. Sensitivity is restricted to values between ISO 640 and 12800.

Options
ON OFF

FPERIPHERAL LIGHT CORRECTION

Select ON to enable peripheral illumination correction during movie recording.

Options
ON OFF

Select OFF if you notice banding in movies recorded using this option.

FFOCUS AREA

Choose the focus area for movies shot using autofocus. You can also choose the focus area (and consequently also the focus zoom position) for movies shot using manual focus.

MOVIE AF MODE

Choose how the camera selects the focus point for movie recording.

Option Description
MULTI Automatic focus-point selection.
AREA The camera focuses on the subject in the selected focus area.

FAF-C CUSTOM SETTING

Select focus-tracking options when recording movies in focus mode C.

TRACKING SENSITIVITY

Choose how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. See “TRACKING SENSITIVITY”.

Options
0 1 2 3 4

AF SPEED

Adjust the autofocus response speed. Choose higher values for faster response times, lower values for slower response times.

Options
-5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5

FFACE/EYE DETECTION SETTING

Enable or disable Intelligent Face Detection when recording movies.

Option Description
FACE DETECTION ON See “FACE/EYE DETECTION SETTING”.
OFF Intelligent Face Detection and eye priority off.

When Intelligent Face Detection is enabled, the camera will focus using continuous AF even when single AF (S) is chosen with the focus mode selector. Intelligent Face Detection is not available in manual focus mode.

FMF ASSIST

Choose how focus is displayed in manual focus mode.

Option Description
STANDARD Focus is displayed normally (focus peaking is not available).
FOCUS PEAK HIGHLIGHT The camera heightens high-contrast outlines. Choose a color and peaking level.

FFOCUS CHECK

If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode.

Options
ON OFF

HDMI OUTPUT INFO DISPLAY

If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display.

Options
ON OFF

4K MOVIE OUTPUT

Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K.

Option Description
b4K Y4K 4K movies are recorded to the camera memory card and output to the HDMI device in 4K.
b4K YFHD 4K movies are recorded to a camera memory card in 4K and output to the HDMI device in Full HD.
bFHD Y4K 4K movies are output to the HDMI device in 4K and recorded to the camera memory card in Full HD.
b— Y4K 4K movies are output to the HDMI device in 4K. The camera does not record 4K movies to a memory card.

This option is only available when V16 : 9 or d17 : 9 is selected for BMOVIE SETTING > MOVIE MODE in the shooting menu.

FULL HD MOVIE OUTPUT

Choose the destination for Full HD movies shot while the camera is connected to an HDMI device.

Option Description
bFHD YFHD Full HD movies are output to the HDMI device and recorded to the camera memory card.
b— YFHD Full HD movies are not recorded to the camera memory card but are output to the HDMI device.

This option is only available when W16 : 9 or W17 : 9 is selected for BMOVIE SETTING > MOVIE MODE in the shooting menu.

When OFF is selected for HDMI OUTPUT INFO DISPLAY, movies will be output to the HDMI device in 4:2:2 10-bit format.

4K HDMI STANDBY QUALITY

Choose whether output to connected HDMI devices switches from 4K to Full HD during standby.

Option Description
V Output to HDMI devices continues at 4K during standby.
W Output to HDMI devices switches to Full HD during standby, reducing the drain on the battery.

HDMI REC CONTROL

Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording.

Options
ON OFF

ZEBRA SETTING

Highlights that may be overexposed are shown by zebra stripes in the movie mode display.

Option Description
ZEBRA RIGHT Right-slanting stripes.
ZEBRA LEFT Left-slanting stripes.
OFF Stripes off.

ZEBRA LEVEL

Choose the brightness threshold for the zebra stripe display.

Options
50 55 60 65 70 75 80 85 90 95 100

AUDIO SETTING

Adjust audio-related settings for movie recording.

INTERNAL MIC LEVEL ADJUSTMENT

Adjust the recording level for the built-in microphone.

Option Description
AUTO The camera adjusts the recording level automatically.
MANUAL Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels.
OFF Turn the built-in microphone off.

EXTERNAL MIC LEVEL ADJUSTMENT

Adjust the recording level for external microphones.

Option Description
AUTO The camera adjusts the recording level automatically.
MANUAL Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels.
OFF Disable recording using external microphones.

MIC LEVEL LIMITER

Reduces distortion caused by input that exceeds the limits of the microphone’s audio circuits.

Options
ON OFF

WIND FILTER

Choose whether to enable wind noise reduction during movie recording.

Options
ON OFF

LOW CUT FILTER

Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording.

Options
ON OFF

HEADPHONES VOLUME

Adjust the headphone volume.

Option Description
0 Mute output to the headphones.
1~10 Choose a volume of from 1 to 10.

MIC/REMOTE RELEASE

Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release.

Options
mMIC nREMOTE

TIME CODE SETTING

Adjust time code (hour, minute, second, and frame number) display settings for movie recording.

TIME CODE DISPLAY

Select ON to display time codes during movie recording and playback.

Options
ON OFF

START TIME SETTING

Choose the time code starting time.

Option Description
MANUAL INPUT Highlight this option and press the focus stick (focus lever) right to choose a start time manually.
CURRENT TIME Set the start time to the current time.
RESET Set the start time to 00:00:00.

COUNT UP SETTING

Choose whether time is clocked continuously or only during movie recording.

Option Description
REC RUN Time is clocked only during movie recording.
FREE RUN Time is clocked continuously.

DROP FRAME

At frame rates of 59.94P, and 29.97P, a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code.

Option Description
ON The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time.
OFF Frames are not dropped.

The time code display varies with the option selected.

ON

OFF

Selecting a frame rate of 23.98P disables frame drop.

HDMI TIME CODE OUTPUT

Choose whether time codes are output to HDMI devices.

Options
ON OFF

TALLY LIGHT

Choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady.

Indicator lamp

AF-assist illuminator

Option Description
FRONT OFF
REARz
The indicator lamp lights during movie recording.
FRONT OFF
REARy
The indicator lamp blinks during movie recording.
FRONTz
REARz
The indicator and AF-assist lamps light during movie recording.
FRONTz
REAR OFF
The AF-assist lamp lights during movie recording.
FRONTy
REARy
The indicator and AF-assist lamps blink during movie recording.
FRONTy
REAR OFF
The AF-assist lamp blinks during movie recording.
FRONT OFF
REAR OFF
The indicator and AF-assist lamps remain off during movie recording.

MOVIE SILENT CONTROL

Select ON to disable camera dials and adjust movie settings using touch-screen controls, preventing the sounds made by camera controls being recorded with the movie (Muting Movie Controls).

Options
ON OFF