This section lists the indicators that may be displayed during shooting.
For illustrative purposes, displays are shown with all indicators lit.
Location data download status
Image transfer status
Number of frames selected for upload
Date and time
Number of available frames 1
Touch screen mode 2
Film simulation 2
Scene position 2
Advanced filter 2
Portrait enhancement level 2
Sound and flash indicator
Focus mode 2
Manual focus indicator
1 Shows “9999” if there is space for over 9999 frames.
2 Camera functions can also be accessed via touch controls.
Use the items in the A[SCREEN SET-UP] menu to adjust the brightness and hue of the LCD monitor when changes in ambient brightness make the display difficult to read. Choose [LCD BRIGHTNESS] to adjust brightness or [LCD COLOR] to adjust hue.
Press [DISP/BACK] to cycle through display modes as follows.
To choose the items shown in the standard display:
Display standard indicators.
Use the [DISP/BACK] button to display standard indicators.
Select [DISP. CUSTOM SETTING].
Select A[SCREEN SET-UP] > [DISP. CUSTOM SETTING] in the setup menu.
Highlight items and press [MENU/OK] to select or deselect.
Press [DISP/BACK] to save changes.
Exit the menus.
Press [DISP/BACK] as needed to exit the menus and return to the shooting display.
Selecting [ELECTRONIC LEVEL] displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down.
Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis.
Number of pixels
Optimal exposure: Pixels are distributed in an even curve throughout the tone range.
Overexposed: Pixels are clustered on the right side of the graph.
Underexposed: Pixels are clustered on the left side of the graph.