Enter a search term and click .

Adjust settings for connection to other devices.


To access connection settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [CONNECTION SETTING].

For more information on wireless connections, visit:

aConnecting to Smartphones and Computers

[Bluetooth SETTINGS]

Adjust Bluetooth settings.

[PAIRING REGISTRATION]

Pair the camera with a smartphone running the FUJIFILM Camera Remote app.

[SELECT PAIRING DESTINATION]

Choose a connection from a list of devices with which the camera has been paired using [PAIRING REGISTRATION]. Select [NO CONNECTION] to exit without connecting.

[DELETE PAIRING REG.]

Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in [SELECT PAIRING DESTINATION].

[Bluetooth ON/OFF]

Option Description
[ON] The camera automatically establishes a Bluetooth connection with paired devices when turned on.
[OFF] The camera does not connect via Bluetooth.

[AUTO IMAGE TRANSFER]

Option Description
[ON] Mark photos for upload as they are taken. Mark JPEG photos for upload as they are taken.
[OFF] Photos are not marked for upload as they are taken.

[SMARTPHONE SYNC. SETTING]

Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.

Option Description
[LOCATION&TIME] Synchronize the time and location.
[LOCATION] Synchronize the location.
[TIME] Synchronize the time.
[OFF] Synchronization off.

Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images.

When [ON] is selected for both [Bluetooth ON/OFF] and [AUTO IMAGE TRANSFER] or images are currently selected for upload using the [IMAGE TRANSFER ORDER] option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. [IMAGE TRANSFER ORDER] can also be used to select pictures for upload when [AUTO IMAGE TRANSFER] is off.

[NETWORK SETTING]

Adjust settings for connection to wireless networks.

[WIRELESS ACCESS POINT SETTING]

Option Description
[SIMPLE SETUP] Connect to an access point using simple settings.
[MANUAL SETUP] Manually adjust settings for connection to a wireless network. Choose the network from a list ([SELECT FROM NETWORK LIST]) or enter the name manually ([ENTER SSID]).

[WIRELESS IP ADDRESS SETTING]

Option Description
[AUTO] The IP address is assigned automatically.
[MANUAL] Assign an IP address manually. Manually choose the IP address ([IP ADDRESS]), network mask ([NETMASK]), and gateway address ([GATEWAY ADDRESS]).

[PC AUTO SAVE]

Adjust settings for connection to computers via wireless LAN.

[PC AUTO SAVE SETTING]

Choose the method used for connection to computers via a wireless LAN.

Option Description
[SIMPLE SETUP] Connect using WPS.
[MANUAL SETUP] Choose the network from a list ([SELECT FROM NETWORK LIST]) or enter the name manually ([ENTER SSID]).

[DELETE REGISTERED DESTINATION PC]

Remove selected destinations.

[DETAILS OF PREVIOUS CONNECTION]

View computers to which the camera has recently connected.

These settings also apply when pictures are downloaded to a computer using “FUJIFILM PC AutoSave” software.

[instax PRINTER CONNECTION SETTING]

Adjust settings for connection to optional Fujifilm instax SHARE printers.

The Printer Name (SSID) and Password

The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.

[CONNECTION MODE]

Adjust settings for connection to external devices.

Option Description
[USB CARD READER] Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.
[USB TETHER SHOOTING AUTO]

The camera can be controlled from computers, gimbals, drones, or other devices connected via USB. The camera automatically enters “tethered shooting” (i.e., remote-control) mode when the external device is turned on and returns to normal operation when the external device turned off or disconnected.

  • Photographs can be taken remotely and automatically downloaded to computers running Capture One, Adobe® Photoshop® Lightroom® + Tether Plugin, or FUJIFILM X Acquire. FUJIFILM X Acquire can also be used to save and load camera settings.
  • The camera can be used as a webcam when connected to a computer running FUJIFILM X Webcam.
  • Remote photography and movie recording are available when the camera is connected to a compatible device such as a gimbal or drone. Use camera controls to switch between still photography and movie recording. The features available vary with the device connected.
[USB TETHER SHOOTING FIXED] As for [USB TETHER SHOOTING AUTO], except that the camera remains in “tethered shooting” (remote-control) mode when the external device is off or not connected, allowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption. At default settings, pictures are not recorded to the memory card.
[WIRELESS TETHER SHOOTING FIXED] Choose this option for wireless remote photography. Select a network using D[CONNECTION SETTING] > [NETWORK SETTING].
[USB RAW CONV.]/[BACKUP RESTORE]

Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.

  • [USB RAW CONV.] (requires FUJIFILM X RAW STUDIO): Use the camera's image processing engine to rapidly convert RAW files to high-quality JPEG images.
  • [BACKUP RESTORE] (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.

D[POWER MANAGEMENT] > [AUTO POWER OFF] settings also apply during tethered shooting. To prevent the camera turning off automatically, select [OFF] for [AUTO POWER OFF].

[USB POWER SUPPLY SETTING]

Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable.

Option Description
[ON] The camera draws power from the connected device, reducing the drain on the camera battery.
[OFF] The camera does not draw power from the connected device.

The camera cannot draw power from Lightning connections or from devices that do not supply power. Select [OFF] before connecting the camera to such devices. The connection may not be available for data transfer or the like when [ON] is selected.

Regardless of the option selected, the battery will charge while the camera is off.

[GENERAL SETTINGS]

Adjust settings for connection to wireless networks.

[NAME]

Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default).

[RESIZE IMAGE FOR SMARTPHONE]H

Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.

Option Description
[ON] Larger images are resized to H for upload.
[OFF] Images are uploaded at their original size.

[GEOTAGGING]

Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.

Options
[ON] [OFF]

[LOCATION INFO]

Display the location data last downloaded from a smartphone.

Options
[ON] [OFF]

r[BUTTON SETTING]

Choose the role played by the [ISO] button during playback.

Option Description
r[PAIRING/TRANSFER ORDER] The [ISO] button can be used for pairing and selecting images for transfer during playback.
r[WIRELESS COMMUNICATION] The [ISO] button can be used during playback to establish wireless connections.

[INFORMATION]

View the camera’s MAC, Bluetooth, and wireless network IP address.

[RESET WIRELESS SETTING]

Restore wireless settings to their default values.