Table of Contents »

• The Setup Menus
• The Setup Menus ([SCREEN SETTING])

Enter a search term and click .

Make changes to display settings.

---

[EVF BRIGHTNESS]

Adjust the brightness of the display in the electronic viewfinder. Select [MANUAL] to choose from 13 options from +5 (bright) to −7 (dark), or select [AUTO] for automatic brightness adjustment.

Options
[MANUAL]	[AUTO]

[EVF COLOR]

Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5.

[LCD BRIGHTNESS]

Adjust monitor brightness. Choose from 11 options between +5 and −5.

[LCD COLOR]

Adjust monitor hue. Choose from 11 options between +5 and −5.

[IMAGE DISP.]

Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities.

Option	Description
[CONTINUOUS]	Pictures are displayed until the [MENU/OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom.
[1.5 SEC]	Pictures are displayed for the selected time or until the shutter button is pressed halfway.
[0.5 SEC]
[OFF]	Pictures are not displayed after shooting.

[AUTOROTATE DISPLAYS]

Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.

Options
[ON]	[OFF]

[PREVIEW EXP./WB IN MANUAL MODE]

Select [PREVIEW EXP./WB] to enable exposure and white balance preview in manual exposure mode, or choose [PREVIEW WB] to preview only white balance ([PREVIEW WB] is recommended in situations in which exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp). Select [OFF] when using a flash or on other occasions on which exposure may change when the picture is taken.

Options
[PREVIEW EXP./WB]	[PREVIEW WB]	[OFF]

[PREVIEW PIC. EFFECT]

Choose [ON] to preview the effects of film simulation, white balance, and other settings in the monitor, [OFF] to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible.

Options
[ON]	[OFF]

[FRAMING GUIDELINE]

Choose a framing grid for shooting mode.

	Option
	[GRID 9]	[GRID 24]	[HD FRAMING]
Display
	For “rule of thirds” composition.	A six-by-four grid.	Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

[AUTOROTATE PB]

Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
[ON]	[OFF]

[FOCUS SCALE UNITS]

Choose the units used for the focus distance indicator.

Options
[METERS]	[FEET]

[DISP. CUSTOM SETTING]

Choose the items shown in the standard display.

1. In shooting mode, use the [DISP/BACK] button to display standard indicators.

2. Press [MENU/OK] and select [SCREEN SET-UP] > [DISP. CUSTOM SETTING] in the ([SET UP]) tab.

3. Highlight items and press [MENU/OK] to select or deselect.

   Item	Default
   [FRAMING GUIDELINE]
   [ELECTRONIC LEVEL]
   [FOCUS FRAME]
   [AF DISTANCE INDICATOR]
   [MF DISTANCE INDICATOR]
   [HISTOGRAM]
   [LIVE VIEW HIGHLIGHT ALERT]
   [SHOOTING MODE]
   [APERTURE/S-SPEED/ISO]
   [INFORMATION BACKGROUND]
   [Expo. Comp. (Digit)]
   [Expo. Comp. (Scale)]
   [FOCUS MODE]
   [PHOTOMETRY]
   [SHUTTER TYPE]
   [FLASH]
   [CONTINUOUS MODE]
   [DUAL IS MODE]
   [TOUCH SCREEN MODE]
   [WHITE BALANCE]
   [FILM SIMULATION]
   [DYNAMIC RANGE]
   [FRAMES REMAINING]
   [IMAGE SIZE/QUALITY]
   [MOVIE MODE & REC. TIME]
   [IMAGE TRANSFER ORDER]
   [BATTERY LEVEL]
   [FRAMING OUTLINE]

4. Press [DISP/BACK] to save changes.

5. Press [DISP/BACK] as needed to exit the menus and return to the shooting display.

[LARGE INDICATORS MODE(EVF)]

Select [ON] to display large indicators in the electronic viewfinder. The indicators displayed can be selected using [SCREEN SETTING] > [ARGE INDICATORS DISP. SETTING].

[OFF]	[ON]

[LARGE INDICATORS MODE(LCD)]

Select [ON] to display large indicators in the LCD monitor. The indicators displayed can be selected using [SCREEN SETTING] > [LARGE INDICATORS DISP. SETTING].

[OFF]	[ON]

[LARGE INDICATORS DISP. SETTING]

Option	Description
[Expo. DISP.]	Choose the items listed at the bottom of the display. Selected items are indicated by check marks (); to deselect, highlight the check marks and press [MENU/OK].
[Scale]	Select [ON] to display the exposure indicator.
[L1], [L2], [L3], [L4]	Choose up to four large icons for display on the left side of the screen.
[R1], [R2], [R3], [R4]	Choose up to four large icons for display on the right side of the screen.