The optional EVF‑TL1 tilt adapter lets you swivel the viewfinder left or right ±45° or up or down between 0° and 90°.
Hot shoe
Tilt lock knob
Adapter lock release
Horizontal swivel lock
Connectors
Connector cover
Hot shoe cover
Slide the EVF-TL1 onto the camera hot shoe and then attach the EVF-GFX1 electronic viewfinder.
Remove the hot shoe covers from the camera and EVF-TL1 before attaching the adapter and viewfinder.
Removing the EVF-TL1
Remove the viewfinder and then, keeping the lock releases () pressed, press down on the front of the adapter () and slide it from the camera as shown.
Use only one tilt adapter at a time.
Swivel the viewfinder into the desired position.
Loosen the tilt lock knob and swivel the viewfinder up or down from 0° to 90°.
With the viewfinder in the desired position (), tighten the tilt lock knob () to lock the viewfinder in place.
Release the horizontal swivel lock as shown and swivel the viewfinder left or right ±45°.
With the viewfinder in the desired position (), return the horizontal swivel lock to the latched position () to lock the viewfinder in place.
.
