Table of Contents »

• The Setup Menus
• The Setup Menus ([BUTTON/DIAL SETTING])

Enter a search term and click .

Access options for camera controls.

---

[FOCUS LEVER SETTING]

Choose the functions performed by the focus stick (focus lever).

Option	Description
[LOCK (OFF)]	The focus stick can not be used during shooting.
[PUSH TO UNLOCK]	Press the stick to view the focus-point display and tilt the stick to select a focus point.
[ON]	Tilt the stick to view the focus-point display and select a focus point.

[EDIT/SAVE QUICK MENU]

Choose the items displayed in the quick menu.

1. Select [BUTTON/DIAL SETTING] > [EDIT/SAVE QUICK MENU] in the ([SET UP]) tab.

2. The current quick menu will be displayed; use the selector to highlight the item you wish to change and press [MENU/OK].

3. Highlight any of the following options and press [MENU/OK] to assign it to the selected position.

   [IMAGE SIZE]

   [IMAGE QUALITY]

   [FILM SIMULATION] ^*

   [GRAIN EFFECT] ^*

   [COLOR CHROME EFFECT]

   [DYNAMIC RANGE] ^*

   [WHITE BALANCE] ^*

   [HIGHLIGHT TONE] ^*

   [SHADOW TONE] ^*

   [COLOR] ^*

   [SHARPNESS] ^*

   [NOISE REDUCTION] ^*

   [SELECT CUSTOM SETTING] ^*

   [AF MODE]

   [FACE/EYE DETECTION SETTING]

   [MF ASSIST]

   [TOUCH SCREEN MODE]

   [SELF-TIMER]

   [PHOTOMETRY]

   [SHUTTER TYPE]

   [FLICKER REDUCTION]

   [FLASH FUNCTION SETTING]

   [FLASH COMPENSATION]

   [MOVIE MODE]

   [MIC LEVEL ADJUSTMENT]

   [EVF/LCD BRIGHTNESS]

   [EVF/LCD COLOR]

   [NONE]

   * Stored in custom settings bank.

   Select [NONE] to assign no option to the selected position. When [SELECT CUSTOM SETTING] is selected, current settings are shown in the quick menu by the label [BASE].

4. Highlight the desired item and press [MENU/OK] to assign it to the selected position.

[FUNCTION (Fn) SETTING]

Choose the roles played by the function buttons.

1. Select [BUTTON/DIAL SETTING] > [FUNCTION (Fn) SETTING] in the ([SET UP]) tab.

2. Highlight the desired control and press [MENU/OK].

3. Highlight any of the following options and press [MENU/OK] to assign it to the selected control.

   [EXP. COMPENSATION]

   [IMAGE SIZE]

   [IMAGE QUALITY]

   [RAW]

   [FILM SIMULATION]

   [GRAIN EFFECT]

   [COLOR CHROME EFFECT]

   [DYNAMIC RANGE]

   [WHITE BALANCE]

   [SELECT CUSTOM SETTING]

   [FOCUS AREA]

   [FOCUS CHECK]

   [AF MODE]

   [RAPID AF]

   [FACE/EYE DETECTION SETTING]

   [SELF-TIMER]

   [AE BKT SETTING]

   [FOCUS BKT SETTING]

   [PHOTOMETRY]

   [SHUTTER TYPE]

   [FLICKER REDUCTION]

   [ISO AUTO SETTING]

   [35mm FORMAT MODE]

   [WIRELESS COMMUNICATION]

   [FLASH FUNCTION SETTING]

   [TTL-LOCK]

   [MODELING FLASH]

   [MIC LEVEL ADJUSTMENT]

   [PREVIEW DEPTH OF FIELD]

   [PREVIEW EXP./WB IN MANUAL MODE]

   [PREVIEW PIC. EFFECT]

   [HISTOGRAM]

   [ELECTRONIC LEVEL]

   [LARGE INDICATORS MODE]

   [AE LOCK ONLY]

   [AF LOCK ONLY]

   [AE/AF LOCK]

   [AF-ON]

   [LOCK SETTING]

   [PLAYBACK]

   [NONE] (control disabled)

   Function button assignment options can also be accessed by holding the [DISP/BACK] button. The selector can not be assigned more than one role at a time.

[AF‑ON]

If [AF‑ON] is selected, you can press the control instead of keeping the shutter button pressed halfway.

[MODELING FLASH]

If [MODELING FLASH] is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

[TTL-LOCK]

If [TTL-LOCK] is selected, you can press the control to lock flash output according to the option selected for [FLASH SETTING] > [TTL-LOCK MODE] ([TTL-LOCK MODE]).

[SELECTOR BUTTON SETTING]

Choose the roles played by the up, down, left, and right buttons on the selector.

Option	Description
[Fn BUTTON]	The selector buttons serve as function buttons.
[FOCUS AREA]	The selector buttons can be used to position the focus area.

[COMMAND DIAL SETTING]

Choose the roles played by the command dials.

Option	Description
[F] [S.S.]	The front command dial controls aperture, the rear command dial shutter speed.
[S.S.] [F]	The front command dial controls shutter speed, the rear command dial aperture.

[S.S. OPERATION]

Select [OFF] to disable shutter-speed fine-tuning using the command dials.

Options
[ON]	[OFF]

[SHUTTER AF]

Choose whether the camera focuses when the shutter button is pressed halfway.

Option	Description
[ON]	In focus mode [S] ([AF‑S]), the camera focuses when the shutter button is pressed halfway and locks focus while the button remains in this position. In focus mode [C] ([AF‑C]), focus is adjusted continually while the button is pressed halfway.
[OFF]	The camera does not focus when the shutter button is pressed halfway.

[SHUTTER AE]

If [ON] is selected, exposure will lock while the shutter button is pressed halfway.

Options
[ON]	[OFF]

[SHOOT WITHOUT LENS]

Choose [ON] to enable the shutter release when no lens is attached.

Options
[ON]	[OFF]

[SHOOT WITHOUT CARD]

Choose whether the shutter can be released without a memory card inserted in the camera.

Option	Description
[ON]	When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed.
[OFF]	The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.

[FOCUS RING]

Choose the direction in which the focus ring is rotated to increase the focus distance.

Options
[CW] (clockwise)	[CCW] (counterclockwise)

[AE/AF-LOCK MODE]

If [AE & AF ON WHEN PRESSING] is selected, exposure and/or focus will lock while you press the button to which exposure or focus lock is assigned. If [AE & AF ON/OFF SWITCH] is selected, exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again.

Options
[AE & AF ON WHEN PRESSING]	[AE & AF ON/OFF SWITCH]

[EXPO. COMP. BUTTON SETTING]

Control the behavior of the rear command dial and the button to which exposure compensation is assigned. If [ON WHEN PRESSING] is selected, exposure compensation can be adjusted by holding the button while rotating dial; if [ON/OFF SWITCH] is selected, exposure compensation can be set by pressing the button once, rotating the dial, and then pressing the button again.

Options
[ON WHEN PRESSING]	[ON/OFF SWITCH]

[TOUCH SCREEN SETTING]

Enable or disable touch-screen controls.

Options
[ON]	[OFF]

[LOCK]

Lock selected controls to prevent unintended operation.

Option	Description
[LOCK SETTING]	Choose from the following: [UNLOCK]: Reset lock options. [ALL FUNCTION]: Lock all controls in the [FUNCTION SELECTION] list. [SELECTED FUNCTION]: Lock only the controls selected in the  [FUNCTION SELECTION] list.
[UNCTION SELECTION]	Choose the controls locked when [SELECTED FUNCTION] is chosen for [LOCK SETTING].