This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Automatically vary settings over a series of pictures.


Press the drive button and choose from the options below.

[AE BKT]

Use [SHOOTING SETTING] > [AE BKT SETTING] to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount.

Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.

[ISO BKT]

Select a bracketing amount (±1, ±2/3, or ±1/3). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount.

[FILM SIMULATION BKT]

Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings, chosen using [SHOOTING SETTING] > [FILM SIMULATION BKT].

[WHITE BALANCE BKT]

Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.

[DYNAMIC RANGE BKT]

Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third.

While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 400 (or to a minimum of ISO 100 to 400 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends.