Automatically vary settings over a series of pictures.
Rotate the drive dial to BKT1 or BKT2.
Navigate to DRIVE SETTING in the SHOOTING SETTING menu and select AE BKT, ISO BKT, FILM SIMULATION BKT, WHITE BALANCE BKT, or DYNAMIC RANGE BKT.
This feature can also be accessed via shortcuts (Shortcut Options).
Select a bracketing amount (options range from ±1/3 to ±2 EV in increments of 1/3 EV). Each time the shutter button is pressed, the camera will take three shots: one using the metered value for exposure, the second overexposed by the selected amount, and the third underexposed by the same amount.
Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.
Select a bracketing amount (±1, ±2/3, or ±1/3). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount.
Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings, chosen using SHOOTING SETTING > BKT SETTING > FILM SIMULATION BKT.
Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.
Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third.
While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends.