The Playback Menu
Adjust playback settings.
The playback menu is displayed when you press MENU/OK in playback mode.
Even if you don't have a computer, you can use the camera to modify RAW pictures and save them in other formats.
Saving RAW Pictures in Another Format
Display a RAW picture.
Highlight RAW CONVERSION in the playback menu.
A list of settings will be displayed.
Press the focus stick (focus lever) up or down to highlight a setting.
Press the focus stick right to display options.
Press the focus stick up or down to highlight the desired option.
Press MENU/OK to select the highlighted option. The settings list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to adjust additional settings.
Press the Q button.
A preview of the copy will be displayed.
The copy will be saved.
RAW conversion options can also be displayed by pressing the Q button when a RAW pictures is displayed during playback.
The settings that can be adjusted when converting pictures from RAW to another format are:
|REFLECT SHOOTING COND.||Create a copy using the settings in effect at the time the photo was taken.|
|IMAGE SIZE||Choose an image size.|
|IMAGE QUALITY||Adjust image quality.|
|PUSH/PULL PROCESSING||Adjust exposure.|
|DYNAMIC RANGE||Enhance details in highlights for natural contrast.|
|D RANGE PRIORITY||Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.|
|FILM SIMULATION||Simulate the effects of different types of film.|
|MONOCHROMATIC COLOR||Add a warm or cool cast to monochrome pictures.|
|GRAIN EFFECT||Add a film grain effect.|
|COLOR CHROME EFFECT||Increase the range of tones available for rendering colors that tend to be highly saturated, such as reds, yellows, and greens.|
|COLOR CHROME FX BLUE||Increase the range of tones available for rendering blues.|
|WHITE BALANCE||Adjust white balance.|
|WB SHIFT||Fine-tune white balance.|
|TONE CURVE||Adjust highlights and shadows.|
|COLOR||Adjust color density.|
|SHARPNESS||Sharpen or soften outlines.|
|HIGH ISO NR||Process the copy to reduce mottling.|
|LENS MODULATION OPTIMIZER||Improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.|
|COLOR SPACE||Choose the color space used for color reproduction.|
|HDR MODE||Reduce loss of detail in highlights and shadows.|
Some settings may be unavailable depending on the options chosen when the picture was taken.
Delete individual pictures, multiple selected pictures, or all pictures.
Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding.
|FRAME||Delete pictures one at a time.|
|SELECTED FRAMES||Delete multiple selected pictures.|
|ALL FRAMES||Delete all unprotected pictures.|
Select FRAME for ERASE in the playback menu.
Press the focus stick (focus lever) left or right to scroll through pictures and press MENU/OK to delete.
A confirmation dialog is not displayed before pictures are deleted; be sure the correct picture is selected before pressing MENU/OK.
Additional pictures can be deleted by pressing MENU/OK. Press the focus stick left or right to scroll through pictures and press MENU/OK to delete.
Select SELECTED FRAMES for ERASE in the playback menu.
Highlight pictures and press MENU/OK to select.
- Selected pictures are indicated by check marks (R).
- To deselect a highlighted picture, press MENU/OK again.
When the operation is complete, press DISP/BACK to display a confirmation dialog.
Highlight OK and press MENU/OK to delete the selected pictures.
Pictures in photobooks or printer orders are shown by S.
Select ALL FRAMES for ERASE in the playback menu.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed cannot be recovered.
If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures.
Create a cropped copy of the current picture.
Display the desired picture.
Select CROP in the playback menu.
Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed.
Press MENU/OK to display a confirmation dialog.
Press MENU/OK again to save the cropped copy to a separate file.
The higher the zoom ratio, the smaller the number of pixels in the cropped copy.
If the size of the final copy will be a, YES will be displayed in yellow.
All copies have an aspect ratio of 3:2.
Create a small copy of the current picture.
Display the desired picture.
Select RESIZE in the playback menu.
Highlight a size and press MENU/OK to display a confirmation dialog.
Press MENU/OK again to save the resized copy to a separate file.
The sizes available vary with the size of the original image.
Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.
Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
|SET ALL||Protect all pictures.|
|RESET ALL||Remove protection from all pictures.|
Protected pictures will be deleted when the memory card is formatted.
Protecting images currently selected for upload to paired smartphones or tablets removes upload marking.
Select ON for DSCREEN SET-UP > AUTOROTATE PB.
Display the desired picture.
Select IMAGE ROTATE in the playback menu.
Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.
Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera.
Protected pictures cannot be rotated. Remove protection before rotating pictures.
The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed on a computer or on other cameras.
Pictures taken with DSCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during playback.
RED EYE REMOVAL
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye.
Display the desired picture.
Select RED EYE REMOVAL in the playback menu.
Results vary depending on the scene and the camera's success in detecting faces.
The amount of time needed to process the image varies with the number of faces detected.
Red eye cannot be removed from pictures that have already been processed using red-eye removal, which are indicated by a e icon during playback.
Red eye removal cannot be performed on RAW images.
VOICE MEMO SETTING
Add a voice memo to the current photograph.
Select ON for VOICE MEMO SETTING in the playback menu.
Display a photo to which you wish to add a voice memo.
Press and hold the AFON button to record a voice memo. Recording ends after 30 s or when you release the button.
The new memo will be recorded over any existing memos.
Voice memos cannot be added to protected pictures.
Deleting the picture also deletes the memo.
Playing Voice Memos
Pictures with voice memos are indicated by q icons during playback.
- To play the memo, press the AFON button.
- A progress bar will be displayed while the memo plays back.
- Volume can be adjusted by pressing MENU/OK to pause playback and then pressing the focus stick (focus lever) up or down to adjust the volume. Press MENU/OK again to resume playback. Volume can also be adjusted using DSOUND SET-UP > PLAYBACK VOLUME.
Rate pictures using stars.
Select RATING in the playback menu.
Rotate the front command dial to choose a picture and the rear command dial to choose a rating of from 0 to 5 stars (“I”).
The focus stick (focus lever) can be used in place of the front command dial to choose a picture.
The rating dialog can also be displayed by pressing the AEL button in single-frame, nine-frame, or hundred-frame playback.
Use touch controls to zoom in or out.
IMAGE TRANSFER ORDER
Select photos for upload to a paired smartphone or tablet.
Select IMAGE TRANSFER ORDER > SELECT FRAMES in the playback menu.
Highlight photos and press MENU/OK to select or deselect. Repeat until all the desired photos have been selected.
Press DISP/BACK to exit to playback.
If ON is selected for both DCONNECTION SETTING > Bluetooth SETTINGS > Bluetooth ON/OFF and AUTO IMAGE TRANSFER, upload will begin shortly after you exit to playback or turn the camera off.
Image transfer orders can contain a maximum of 999 pictures.
The following cannot be selected for upload:
- Protected pictures
- RAW images
- “Gift” pictures (pictures taken with other cameras)
If PAIRING/TRANSFER ORDER is selected for DCONNECTION SETTING > GENERAL SETTINGS > rBUTTON SETTING, the IMAGE TRANSFER ORDER dialog can be displayed by pressing the ISO button.
To remove upload marking from all pictures in the current order, select IMAGE TRANSFER ORDER > RESET ORDER.
If ON is selected for DCONNECTION SETTING > Bluetooth SETTINGS > AUTO IMAGE TRANSFER, photos will automatically be marked for upload as they are taken.
xF WIRELESS COMMUNICATION
Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to:
- Control the camera and take pictures remotely
- Receive pictures uploaded from the camera
- Browse the pictures on the camera and download selected pictures
- Upload location data to the camera
For downloads and other information, visit:
View pictures in an automated slide show. Press MENU/OK to start and press the focus stick (focus lever) right or left to skip ahead or back. Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at any time by pressing MENU/OK.
The camera will not turn off automatically while a slide show is in progress.
Create books from your favorite photos.
Creating a Photobook
Select NEW BOOK for CPLAY BACK MENU > PHOTOBOOK ASSIST.
Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the book is complete.
Neither photographs a or smaller nor movies can be selected for photobooks.
The first picture selected becomes the cover image. A different picture can be selected at any time.
Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new book will be added to the list in the photobook assist menu.
Books can contain up to 300 pictures.
Books that contain no photos are automatically deleted.
Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures.
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions.
- EDIT: Edit the book as described in “Creating a Photobook”.
- ERASE: Delete the book.
PC AUTO SAVE
Upload pictures from the camera to a computer running the latest version of FUJIFILM PC AutoSave (note that you must first install the software and configure the computer as a destination for images copied from the camera).
For downloads and other information, visit:
PRINT ORDER (DPOF)
Create a digital “print order” for DPOF-compatible printers.
Select CPLAY BACK MENU > PRINT ORDER (DPOF).
Select WITH DATEs to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding.
Display a picture you wish to include in or remove from the print order.
Press the focus stick (focus lever) up or down to choose the number of copies (up to 99).
To remove a picture from the order, press the focus stick down until the number of copies is 0.
Repeat steps 3–4 to complete the print order.
The total number of prints is displayed in the monitor. Press MENU/OK to exit.
The pictures in the current print order are indicated by a u icon during playback.
Print orders can contain a maximum of 999 pictures from a single memory card.
If a memory card is inserted containing a print order created by another camera, you will need to delete the order before creating as described above.
instax PRINTER PRINT
To print pictures to optional Fujifilm instax SHARE printers, first select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password, then follow the steps below.
Turn the printer on.
Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer.
Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start.
Pictures taken with other cameras cannot be printed.
The area printed is smaller than the area visible in the LCD monitor.
The displays may vary depending on the printer connected.
Choose the aspect ratio used for the display of still pictures on High Definition (HD) devices (this option is available only when an HDMI cable is connected).
|16 : 9||3 : 2|
Choose 16 : 9 to display photos with an aspect ratio of 16 : 9 full screen. The pictures will be displayed full screen with tops and bottoms cropped out.