Enter a search term and click .

Adjust image quality settings for movies.


To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab.

The options available vary with the shooting mode selected.

FFILM SIMULATION

Options are the same as those for still photography, but settings must be adjusted separately (aFILM SIMULATION).

FMONOCHROMATIC COLOR

Options are the same as those for still photography, but settings must be adjusted separately (aMONOCHROMATIC COLOR).

FWHITE BALANCE

Options are the same as those for still photography, but settings must be adjusted separately (aWHITE BALANCE).

FDYNAMIC RANGE

Choose a dynamic range for movie recording.

Option Description
V100% See “DYNAMIC RANGE”.
W200%
X400%

AUTO (automatic dynamic range control) is not available during movie recording.

W200% is available at sensitivities of from ISO 320 to ISO 12800, X400% at sensitivities of from ISO 640 to 12800.

The BMOVIE SETTING > FDYNAMIC RANGE option is available when OFF is selected for BMOVIE SETTING > F-Log RECORDING.

FTONE CURVE

Options are the same as those for still photography, but settings must be adjusted separately (aTONE CURVE).

FCOLOR

Options are the same as those for still photography, but settings must be adjusted separately (aCOLOR).

FSHARPNESS

Options are the same as those for still photography, but settings must be adjusted separately (aSHARPNESS).

FHIGH ISO NR

Options are the same as those for still photography, but settings must be adjusted separately (aHIGH ISO NR).

VINTERFRAME NR

Select ON to enable interframe noise reduction.

Options
ON OFF

Interframe noise reduction is available only when frame rates of 29.97P or slower are selected at a frame size of V or d.

“Ghosting” may occur with moving subjects or if the camera is moved during shooting.

FPERIPHERAL LIGHT CORRECTION

Select ON to enable peripheral illumination correction during movie recording.

Options
ON OFF

If ON is selected when a lens that does not transmit data to the camera is attached using a FUJIFILM M MOUNT ADAPTER (available separately), peripheral illumination will be adjusted according to the option selected for HIMAGE QUALITY SETTING > xFMOUNT ADAPTER SETTING > PERIPHERAL ILLUMINATION CORRECTION in the shooting menu (aPeripheral Illumination Correction).

Select OFF if you notice banding in movies recorded using this option.

xFMOUNT ADAPTOR SETTING

This item is also found in the photo menus (axFMOUNT ADAPTOR SETTING (Still Photography)). Changes to one apply to the other.