Adjust basic camera settings.
To access basic camera settings, press MENU/OK, select the D(SET UP) tab, and choose USER SETTING.
To format a memory card:
Select DUSER SETTING > FORMAT in the D(SET UP) tab.
Highlight the slot containing the card you wish to format and press MENU/OK.
A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK.
To exit without formatting the memory card, select CANCEL or press DISP/BACK.
All data—including protected pictures—will be deleted from the memory card. Be sure important files have been copied to a computer or other storage device.
Do not open the battery-chamber cover during formatting.
The format menu can also be displayed by pressing the center of the rear command dial while pressing and holding the b button.
To set the camera clock:
Select DUSER SETTING > DATE/TIME in the D(SET UP) tab.
Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down.
Press MENU/OK to set the clock.
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between your local and home time zone:
Highlight gLOCAL and press MENU/OK.
Use the selector to choose the time difference between local time and your home time zone. Press MENU/OK when settings are complete.
To set the camera clock to local time, highlight gLOCAL and press MENU/OK. To set the clock to the time in your home time zone, select hHOME.
If gLOCAL is selected, g will be displayed in yellow for about three seconds when the camera is turned on.
Choose a language.
xMY MENU SETTING
Edit the items listed in the E(MY MENU) tab, a personalized custom menu of frequently-used photo menu options (aMY MENU).
FMY MENU SETTING
Edit the items listed in the E(MY MENU) tab, a personalized custom menu of frequently-used movie menu options (aMY MENU).
Remove dust from the camera image sensor.
|OK||Clean the sensor immediately.|
|WHEN SWITCHED ON||Sensor cleaning will be performed when the camera is turned on.|
|WHEN SWITCHED OFF||Sensor cleaning will be performed when the camera turns off (sensor cleaning is not however performed if the camera turns off in playback mode).|
Dust that cannot be removed using sensor cleaning can be removed using a blower (aCleaning the Image Sensor).
Check battery age. Age is expressed as a number between 0 and 4. The higher the number, the older the battery.
The older the battery, the faster it loses its charge. We recommend that batteries be replaced as they wear out.
Reset shooting or setup menu options to default values.
Highlight the desired option and press MENU/OK.
Option Description STILL MENU RESET Reset all photo menu settings other than custom white balance and custom settings banks created using EDIT/SAVE CUSTOM SETTING to default values. MOVIE MENU RESET Reset all movie menu settings other than custom white balance and custom settings banks created using EDIT/SAVE CUSTOM SETTING to default values. SET-UP RESET Reset all setup menu settings other than DATE/TIME, TIME DIFFERENCE, COPYRIGHT INFO, and connection-related CONNECTION SETTING options to default values.
A confirmation dialog will be displayed; highlight OK and press MENU/OK.
To view electronic copies of the product model number, and other certificates, select DUSER SETTING > REGULATORY in the setup menu.