The Setup Menus (SCREEN SETTING)Make changes to display settings.
To access display settings, press MENU/OK, select the (SET UP) tab, and choose SCREEN SET-UP.
Adjust the brightness of the display in the electronic viewfinder. Select MANUAL to choose from 13 options from +5 (bright) to −7 (dark), or select AUTO for automatic brightness adjustment.
| Options | |
|---|---|
| MANUAL | AUTO |
Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5.
| Options | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| +5 | +4 | +3 | +2 | +1 | 0 | -1 | -2 | -3 | -4 | -5 |
Adjust monitor brightness. Choose from 11 options between +5 and −5.
| Options | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| +5 | +4 | +3 | +2 | +1 | 0 | -1 | -2 | -3 | -4 | -5 |
Adjust monitor hue. Choose from 11 options between +5 and −5.
| Options | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| +5 | +4 | +3 | +2 | +1 | 0 | -1 | -2 | -3 | -4 | -5 |
Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities.
| Option | Description |
|---|---|
| CONTINUOUS | Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom. |
| 1.5 SEC | Pictures are displayed for the selected time or until the shutter button is pressed halfway. |
| 0.5 SEC | |
| OFF | Pictures are not displayed after shooting. |
Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.
| Options | |
|---|---|
| ON | OFF |
Select PREVIEW EXP./WB to enable exposure and white balance preview in manual exposure mode, or choose PREVIEW WB to preview only white balance. Select OFF when using a flash or on other occasions on which exposure may change when the picture is taken.
| Options | ||
|---|---|---|
| PREVIEW EXP./WB | PREVIEW WB | OFF |
Choose ON to preview the effects of film simulation, white balance, and other settings in the monitor, OFF to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible.
| Options | |
|---|---|
| ON | OFF |
If OFF is selected, the effects of camera settings will not be visible in the monitor and colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings.
Choose a framing grid for shooting mode.
| Option | |||
|---|---|---|---|
 GRID 9 |
 GRID 24 |
 HD FRAMING |
|
| Display | |||
| For “rule of thirds” composition. | A six-by-four grid. | Frame HD pictures in the crop shown by the lines at the top and bottom of the display. | |
Framing guides are not shown at default settings but can be displayed using SCREEN SET-UP > DISP. CUSTOM SETTING (
DISP. CUSTOM SETTING).
Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
| Options | |
|---|---|
| ON | OFF |
Choose the units used for the focus distance indicator.
| Options | |
|---|---|
| METERS | FEET |
Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached. For information on using cinema lenses, see the documentation provided with the lens.
| Option | Description |
|---|---|
| T NUMBER | A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure. |
| F NUMBER | A measure of lens aperture commonly used by photographers. Lens transmittance is assumed to be 100%, meaning that the same aperture may produce different exposures depending on the lens. |
Choose the content of the two windows in the dual display.
| Option | Description |
|---|---|
| R:FOCUS L:FRAME |
The right (small) window shows a close-up of the focus area, while the left (large) window shows the entire frame. |
| R:FRAME L:FOCUS |
The right (small) window shows the entire frame, while the left (large) window shows a close-up of the focus area. |
Choose the items shown in the standard display.
In shooting mode, press DISP/BACK until standard indicators are displayed.
Press MENU/OK and select SCREEN SET-UP > DISP. CUSTOM SETTING in the (SET UP) tab.
Highlight items and press MENU/OK to select or deselect.
| Item | Default |
|---|---|
| FRAMING GUIDELINE |  |
| ELECTRONIC LEVEL | |
| FOCUS FRAME |  |
| AF DISTANCE INDICATOR | |
| MF DISTANCE INDICATOR | |
| HISTOGRAM | |
| SHOOTING MODE | |
| APERTURE/S-SPEED/ISO | |
| INFORMATION BACKGROUND | |
| Expo. Comp. (Digit) | |
| Expo. Comp. (Scale) | |
| FOCUS MODE | |
| PHOTOMETRY | |
| SHUTTER TYPE | |
| FLASH | |
| CONTINUOUS MODE | |
| DUAL IS MODE | |
| WHITE BALANCE | |
| FILM SIMULATION | |
| DYNAMIC RANGE | |
| BOOST MODE | |
| FRAMES REMAINING | |
| IMAGE SIZE/QUALITY | |
| MOVIE MODE & REC. TIME | |
| MIC LEVEL | |
| BATTERY LEVEL | |
| FRAMING OUTLINE | |
Press DISP/BACK to save changes.
Press DISP/BACK as needed to exit the menus and return to the shooting display.
Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using SCREEN SETTING > LARGE INDICATORS DISP. SETTING.
 |
 |
| OFF | ON |
|---|
Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF), including:
If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (Fn/AE-L/AF-L BUTTON SETTING, Assigning Roles to the Function Buttons).
Select ON to display large indicators in the LCD monitor. The indicators displayed can be selected using SCREEN SETTING > LARGE INDICATORS DISP. SETTING.
 |
 |
| OFF | ON |
|---|
Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(LCD), including:
If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (Fn/AE-L/AF-L BUTTON SETTING, Assigning Roles to the Function Buttons).
Choose the indicators displayed when ON is selected for SCREEN SETTING > LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD).
| Option | Description |
|---|---|
|
|
Choose the items listed at the bottom of the display. Selected items are indicated by check marks (); to deselect, highlight the check marks and press MENU/OK. |
|
|
Select ON to display the exposure indicator. |
|
|
Choose up to four large icons for display on the left side of the screen. |
|
|
Choose up to four large icons for display on the right side of the screen. |
.
Expo. DISP.
Scale
L1, L2, L3, L4
R1, R2, R3, R4
