Table of Contents »

• The Setup Menus
• The Setup Menus (BUTTON/DIAL SETTING)

Enter a search term and click .

Access options for camera controls.

---

EDIT/SAVE QUICK MENU

Choose the items displayed in the quick menu.

1. Select BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the (SET UP) tab.

2. The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK.

3. Highlight any of the following options and press MENU/OK to assign it to the selected position.

   IMAGE SIZE

   IMAGE QUALITY

   FILM SIMULATION ^*

   GRAIN EFFECT ^*

   DYNAMIC RANGE ^*

   WHITE BALANCE ^*

   HIGHLIGHT TONE ^*

   SHADOW TONE ^*

   COLOR ^*

   SHARPNESS ^*

   NOISE REDUCTION ^*

   SELECT CUSTOM SETTING ^*

   AF MODE

   AF-C CUSTOM SETTINGS

   FACE/EYE DETECTION SETTING

   MF ASSIST

   SELF-TIMER

   PHOTOMETRY

   SHUTTER TYPE

   ISO

   TOUCH SCREEN MODE

   FLASH FUNCTION SETTING

   FLASH COMPENSATION

   MOVIE MODE

   MIC LEVEL ADJUSTMENT

   SOUND & FLASH

   EVF/LCD BRIGHTNESS

   EVF/LCD COLOR

   NONE

   * Stored in custom settings bank.

   Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE.

4. Highlight the desired item and press MENU/OK to assign it to the selected position.

Fn/AE-L/AF-L BUTTON SETTING

Choose the roles played by the function buttons.

1. Select BUTTON/DIAL SETTING > Fn/AE‑L/AF‑L BUTTON SETTING in the (SET UP) tab.

2. Highlight the desired control and press MENU/OK.

3. Highlight any of the following options and press MENU/OK to assign it to the selected control.

   IMAGE SIZE

   IMAGE QUALITY

   RAW

   FILM SIMULATION

   GRAIN EFFECT

   DYNAMIC RANGE

   WHITE BALANCE

   SELECT CUSTOM SETTING

   FOCUS AREA

   FOCUS CHECK

   AF MODE

   AF-C CUSTOM SETTINGS

   FACE/EYE DETECTION SETTING

   DRIVE SETTING

   SELF-TIMER

   PHOTOMETRY

   SHUTTER TYPE

   ISO

   WIRELESS COMMUNICATION

   FLASH FUNCTION SETTING

   TTL-LOCK

   MODELING FLASH

   MIC LEVEL ADJUSTMENT

   PREVIEW DEPTH OF FIELD

   PREVIEW EXP./WB IN MANUAL MODE

   PREVIEW PIC. EFFECT

   HISTOGRAM

   LARGE INDICATORS MODE

   AE LOCK ONLY

   AF LOCK ONLY

   AE/AF LOCK

   AF-ON

   APERTURE SETTING

   PLAYBACK

   NONE (control disabled)

   Function button assignment options can also be accessed by holding the DISP/BACK button. The selector can not be assigned more than one role at a time.

AF‑ON

If AF‑ON is selected, you can press the control instead of keeping the shutter button pressed halfway.

MODELING FLASH

If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

TTL-LOCK

If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for FLASH SETTING > TTL-LOCK MODE (TTL-LOCK MODE).

SELECTOR BUTTON SETTING

Choose the roles played by the up, down, left, and right buttons on the selector.

Option	Description
Fn BUTTON	The selector buttons serve as function buttons.
FOCUS AREA	The selector buttons can be used to position the focus area.

COMMAND DIAL SETTING

Choose the roles played by the command dials.

Option	Description
F S.S.	The front command dial controls aperture, the rear command dial shutter speed.
S.S. F	The front command dial controls shutter speed, the rear command dial aperture.

SHUTTER AF

Choose whether the camera focuses when the shutter button is pressed halfway.

Option	Description
ON	In focus mode S (AF‑S), the camera focuses when the shutter button is pressed halfway and locks focus while the button remains in this position. In focus mode C (AF‑C), focus is adjusted continually while the button is pressed halfway.
OFF	The camera does not focus when the shutter button is pressed halfway.

SHUTTER AE

If ON is selected, exposure will lock while the shutter button is pressed halfway.

Options
ON	OFF

SHOOT WITHOUT LENS

Choose ON to enable the shutter release when no lens is attached.

Options
ON	OFF

FOCUS RING

Choose the direction in which the focus ring is rotated to increase the focus distance.

Options
CW (clockwise)	CCW (counterclockwise)

AE/AF-LOCK MODE

If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AE-L or AF-L button is pressed. If AE & AF ON/OFF SWITCH is selected, exposure and/or focus will lock when the AE-L or AF-L button is pressed and remain locked until the button is pressed again.

Options
AE & AF ON WHEN PRESSING	AE & AF ON/OFF SWITCH

APERTURE SETTING

Choose the method used to adjust aperture when using lenses with no aperture rings.

Option	Description
AUTO+MANUAL	Rotate the front command dial to choose the aperture. Rotate past minimum aperture to choose A (auto).
AUTO	Aperture is selected automatically; camera functions in exposure mode P (program AE) or S (shutter-priority AE).
MANUAL	Rotate the front command dial to choose the aperture; camera functions in exposure mode A (aperture-priority AE) or M (manual).

TOUCH SCREEN SETTING

Enable or disable touch-screen controls.

Option	Description
TOUCH SCREEN ON/OFF	ON: Touch controls enabled; the LCD monitor functions as a touch screen. OFF: Touch controls disabled; the LCD monitor cannot be used as a touch screen.
EVF TOUCH SCREEN AREA SETTINGS	Select the area of the LCD monitor (ALL, RIGHT, or LEFT) used for touch controls while the viewfinder is active, or choose OFF to disable touch controls while the viewfinder is in use.