Table of Contents »

• The Setup Menus
• The Setup Menus (BUTTON/DIAL SETTING)

Enter a search term and click .

Access options for camera controls.

---

FOCUS LEVER SETTING

Choose the functions performed by the focus stick (focus lever).

Option	Description
LOCK (OFF)	The focus stick can not be used during shooting.
PUSH TO UNLOCK	Press the stick to view the focus-point display and tilt the stick to select a focus point.
ON	Tilt the stick to view the focus-point display and select a focus point.

EDIT/SAVE QUICK MENU

Choose the items displayed in the quick menu.

1. Select BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the (SET UP) tab.

2. The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK.

3. Highlight any of the following options and press MENU/OK to assign it to the selected position.

   IMAGE SIZE

   IMAGE QUALITY

   FILM SIMULATION ^*

   GRAIN EFFECT ^*

   COLOR CHROME EFFECT

   DYNAMIC RANGE ^*

   WHITE BALANCE ^*

   HIGHLIGHT TONE ^*

   SHADOW TONE ^*

   COLOR ^*

   SHARPNESS ^*

   NOISE REDUCTION ^*

   SELECT CUSTOM SETTING ^*

   AF MODE

   FACE/EYE DETECTION SETTING

   MF ASSIST

   TOUCH SCREEN MODE

   SELF-TIMER

   PHOTOMETRY

   SHUTTER TYPE

   FLICKER REDUCTION

   FLASH FUNCTION SETTING

   FLASH COMPENSATION

   MOVIE MODE

   MIC LEVEL ADJUSTMENT

   EVF/LCD BRIGHTNESS

   EVF/LCD COLOR

   NONE

   * Stored in custom settings bank.

   Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE.

4. Highlight the desired item and press MENU/OK to assign it to the selected position.

FUNCTION (Fn) SETTING

Choose the roles played by the function buttons.

1. Select BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING in the (SET UP) tab.

2. Highlight the desired control and press MENU/OK.

3. Highlight any of the following options and press MENU/OK to assign it to the selected control.

   EXP. COMPENSATION

   IMAGE SIZE

   IMAGE QUALITY

   RAW

   FILM SIMULATION

   GRAIN EFFECT

   COLOR CHROME EFFECT

   DYNAMIC RANGE

   WHITE BALANCE

   SELECT CUSTOM SETTING

   FOCUS AREA

   FOCUS CHECK

   AF MODE

   RAPID AF

   FACE/EYE DETECTION SETTING

   SELF-TIMER

   AE BKT SETTING

   FOCUS BKT SETTING

   PHOTOMETRY

   SHUTTER TYPE

   FLICKER REDUCTION

   ISO AUTO SETTING

   FLICKER REDUCTION

   35mm FORMAT MODE

   FLASH FUNCTION SETTING

   TTL-LOCK

   MODELING FLASH

   MIC LEVEL ADJUSTMENT

   PREVIEW DEPTH OF FIELD

   PREVIEW EXP./WB IN MANUAL MODE

   PREVIEW PIC. EFFECT

   HISTOGRAM

   ELECTRONIC LEVEL

   LARGE INDICATORS MODE

   AE LOCK ONLY

   AF LOCK ONLY

   AE/AF LOCK

   AF-ON

   LOCK SETTING

   PLAYBACK

   NONE (control disabled)

   Function button assignment options can also be accessed by holding the DISP/BACK button. The selector can not be assigned more than one role at a time.

AF‑ON

If AF‑ON is selected, you can press the control instead of keeping the shutter button pressed halfway.

MODELING FLASH

If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

TTL-LOCK

If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for FLASH SETTING > TTL-LOCK MODE (TTL-LOCK MODE).

SELECTOR BUTTON SETTING

Choose the roles played by the up, down, left, and right buttons on the selector.

Option	Description
Fn BUTTON	The selector buttons serve as function buttons.
FOCUS AREA	The selector buttons can be used to position the focus area.

COMMAND DIAL SETTING

Choose the roles played by the command dials.

Option	Description
F S.S.	The front command dial controls aperture, the rear command dial shutter speed.
S.S. F	The front command dial controls shutter speed, the rear command dial aperture.

S.S. OPERATION

Select OFF to disable shutter-speed fine-tuning using the command dials.

Options
ON	OFF

SHUTTER AF

Choose whether the camera focuses when the shutter button is pressed halfway.

Option	Description
ON	In focus mode S (AF‑S), the camera focuses when the shutter button is pressed halfway and locks focus while the button remains in this position. In focus mode C (AF‑C), focus is adjusted continually while the button is pressed halfway.
OFF	The camera does not focus when the shutter button is pressed halfway.

SHUTTER AE

If ON is selected, exposure will lock while the shutter button is pressed halfway.

Options
ON	OFF

SHOOT WITHOUT LENS

Choose ON to enable the shutter release when no lens is attached.

Options
ON	OFF

SHOOT WITHOUT CARD

Choose whether the shutter can be released without a memory card inserted in the camera.

Option	Description
ON	When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed.
OFF	The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.

FOCUS RING

Choose the direction in which the focus ring is rotated to increase the focus distance.

Options
CW (clockwise)	CCW (counterclockwise)

AE/AF-LOCK MODE

If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while you press the button to which exposure or focus lock is assigned. If AE & AF ON/OFF SWITCH is selected, exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again.

Options
AE & AF ON WHEN PRESSING	AE & AF ON/OFF SWITCH

EXPO. COMP. BUTTON SETTING

Control the behavior of the rear command dial and the button to which exposure compensation is assigned. If ON WHEN PRESSING is selected, exposure compensation can be adjusted by holding the button while rotating dial; if ON/OFF SWITCH is selected, exposure compensation can be set by pressing the button once, rotating the dial, and then pressing the button again.

Options
ON WHEN PRESSING	ON/OFF SWITCH

TOUCH SCREEN SETTING

Enable or disable touch-screen controls.

Options
ON	OFF

LOCK

Lock selected controls to prevent unintended operation.

Option	Description
LOCK SETTING	Choose from the following: UNLOCK: Reset lock options. ALL FUNCTION: Lock all controls in the FUNCTION SELECTION list. SELECTED FUNCTION: Lock only the controls selected in the FUNCTION SELECTION list.
FUNCTION SELECTION	Choose the controls locked when SELECTED FUNCTION is chosen for LOCK SETTING.