DThe Setup Menus (CONNECTION SETTING)
Adjust settings for connection to other devices.
To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING.
For more information on wireless connections, visit:
- Bluetooth SETTINGS
- NETWORK SETTING
- instax PRINTER CONNECTION SETTING
- CONNECTION MODE
- SMARTPHONE WIRELESS COM. FREQUENCY SETTING
- GENERAL SETTINGS
- RESET WIRELESS SETTING
Adjust Bluetooth settings.
|PAIRING REGISTRATION||To pair the camera with a smartphone or tablet, select this option, then launch FUJIFILM Camera Remote on the smart device and tap PAIRING REGISTRATION.|
|SELECT PAIRING DESTINATION||Choose a connection from a list of devices with which the camera has been paired using PAIRING REGISTRATION. Select NO CONNECTION to exit without connecting.|
|DELETE PAIRING REG.||Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in SELECT PAIRING DESTINATION.|
ON: The camera automatically establishes a Bluetooth connection with paired devices when turned on.
OFF: The camera does not connect via Bluetooth.
|AUTO IMAGE TRANSFER||
ON: Mark photos for upload as they are taken. Mark JPEG photos for upload as they are taken.
OFF: Photos are not marked for upload as they are taken.
|SMARTPHONE SYNC. SETTING||
Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.
LOCATION&TIME: Synchronize the time and location.
LOCATION: Synchronize the location.
TIME: Synchronize the time.
OFF: Synchronization off.
Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images.
When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER or images are currently selected for upload using the IMAGE TRANSFER ORDER option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. IMAGE TRANSFER ORDER can also be used to select pictures for upload when AUTO IMAGE TRANSFER is off.
Adjust settings for connection to wireless networks.
|WIRELESS ACCESS POINT SETTING||
SIMPLE SETUP: Connect to an access point using simple settings.
MANUAL SETUP: Manually adjust settings for connection to a wireless network. Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID).
|WIRELESS IP ADDRESS SETTING||
AUTO: The IP address is assigned automatically.
MANUAL: Assign an IP address manually. Manually choose the IP address (IP ADDRESS), network mask (NETMASK), and gateway address (GATEWAY ADDRESS).
instax PRINTER CONNECTION SETTING
Adjust settings for connection to optional Fujifilm instax SHARE printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
Adjust settings for connection to external devices.
|USB CARD READER||Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.|
|USB TETHER SHOOTING AUTO||
The camera can be controlled from computers, gimbals, drones, or other devices connected via USB. The camera automatically enters “tethered shooting” (i.e., remote-control) mode when the external device is turned on and returns to normal operation when the external device turned off or disconnected.
|USB TETHER SHOOTING FIXED||As for USB TETHER SHOOTING AUTO, except that the camera remains in “tethered shooting” (remote-control) mode when the external device is off or not connected, allowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption. At default settings, pictures are not recorded to the memory card.|
|WIRELESS TETHER SHOOTING FIXED||ChooseChoose this option for wireless remote photography. Select a network using DCONNECTION SETTING > NETWORK SETTING.|
|USB RAW CONV./BACKUP RESTORE||
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.
DPOWER MANAGEMENT > AUTO POWER OFF settingssettings also apply during tethered shooting. To prevent the camera turning off automatically, select OFF for AUTO POWER OFF.
Visit the websites below to learn more about or download the following computer software:
a Capture One Express Fujifilm
a Adobe® Photoshop® Lightroom® + Tether Plugin
a RAW FILE CONVERTER EX powered by SILKYPIX
SMARTPHONE WIRELESS COM. FREQUENCY SETTING
Choose a wireless band for use with Camera Remote.
|2.4GHz (IEEE802.11 b/g/n)||5GHz (IEEE802.11 a/n/ac)|
Some countries and regions prohibit outdoor use of certain channels in the 5 GHz band. Check whether use of the 5.2 GHz (W52) band is permitted before selecting the 5 GHz option.
The options available vary with the country or region of sale.
Adjust settings for connection to wireless networks.
|NAME||Choose a name (NAME) to identify the camera on the wireless network (the camera is assigned a unique name by default).|
|RESIZE IMAGE FOR SMARTPHONE H||
Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
ON: Larger images are resized to H for upload. This setting is recommended.
OFF: Images are uploaded at their original size.
|GEOTAGGING||Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.|
|LOCATION INFO||Display the location data last downloaded from a smartphone.|
Choose the role played by function buttons assigned the WIRELESS COMMUNICATION function.
sPAIRING/TRANSFER ORDER: The buttons can be used for pairing and selecting images for transfer.
rWIRELESS COMMUNICATION: The buttons can be used for wireless connections.
View the camera’s MAC and Bluetooth address.
RESET WIRELESS SETTING
Restore wireless settings to their default values.