Warning Messages and Displays

The following warnings appear in the display.

Warning	Description
(red)	Low battery. Charge the battery or insert a fully-charged spare battery.
(blinks red)	Battery exhausted. Charge the battery or insert a fully-charged spare battery.
(displayed in red with red focus frame)	The camera can not focus. Use focus lock to focus on another subject at the same distance, then recompose the picture.
Aperture or shutter speed displayed in red	The subject is too bright or too dark and the picture will be over- or under-exposed. Use the flash for additional lighting when taking photographs of poorly-lit subjects.
[FOCUS ERROR]	Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
[TURN OFF THE CAMERA AND TURN ON AGAIN]
[LENS CONTROL ERROR]
[BUSY]	The memory card is incorrectly formatted. Use the camera to format the card.
[CARD NOT INITIALIZED]	The memory card is not formatted or the memory card has been formatted in a computer or other device: Format the memory card using [USER SETTING] > [FORMAT]. The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. Camera malfunction: Contact a FUJIFILM dealer.
[PROTECTED CARD]	The memory card is locked. Unlock the card.
[CARD ERROR]	The memory card is not formatted for use in the camera: Format the card. The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. Incompatible memory card: Use a compatible card. Camera malfunction: Contact a FUJIFILM dealer.
[MEMORY FULL]	The memory card is full and pictures can not be recorded. Delete pictures or insert a memory card with more free space.
[NO CARD]	The shutter can only be released when a memory card is inserted. Insert a memory card.
[WRITE ERROR]	Memory card error or connection error: Reinsert the card or turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer. Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. The memory card is not formatted: Format the memory card.
[READ ERROR]	The file is corrupt or was not created with the camera: The file can not be viewed. The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. Camera malfunction: Contact a FUJIFILM dealer.
[FRAME NO. FULL]	The camera has run out of frame numbers (current frame number is 999–9999). Format the memory card and select [RENEW] for [SAVE DATA SETTING] > [FRAME NO.]. Take a picture to reset frame numbering to 100–0001, then select [CONTINUOUS] for [FRAME NO.].
[PROTECTED FRAME]	An attempt was made to delete or rotate to a protected picture. Remove protection and try again.
[CAN NOT CROP]	The picture is damaged or was not created with the camera.
[CANNOT EXECUTE]	Red-eye removal can not be applied to the selected picture.
[CANNOT EXECUTE]	Red-eye removal can not be applied to movies.
[CAN NOT ROTATE]	An attempt was made to rotate a picture that can not be rotated.
[CAN NOT ROTATE]	Movies can not be rotated.
[DPOF FILE ERROR]	The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a computer and create a new print order.
[CAN NOT SET DPOF]	The picture can not be printed using DPOF.
[CAN NOT SET DPOF]	Movies can not be printed using DPOF.
(yellow)	Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
(red)	Turn the camera off and wait for it to cool. Display quality and burst rate will drop, and mottling may increase in pictures taken when this warning is displayed.