Enter a search term and click .

Adjust time code (hour, minute, second, and frame number) display settings for movie recording.


To display time code settings, press [MENU/OK] in the movie shooting display and select the Q ([TIME CODE SETTING]) tab.


[TIME CODE DISPLAY]

Select [ON] to display time codes during movie recording and playback.

Options
[ON] [OFF]

[START TIME SETTING]

Choose the time code starting time.

Option Description
[MANUAL INPUT] Highlight this option and press the focus stick (focus lever) right to choose a start time manually.
[CURRENT TIME] Set the start time to the current time.
[RESET] Set the start time to 00:00:00.

[COUNT UP SETTING]

Choose whether time is clocked continuously or only during movie recording.

Option Description
[REC RUN] Time is clocked only during movie recording.
[FREE RUN] Time is clocked continuously.

[DROP FRAME]

At frame rates of 29.97P, a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code.

Option Description
[ON] The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time.
[OFF] Frames are not dropped.

The time code display varies with the option selected.

[ON]

[OFF]

Selecting a frame rate of [23.98P] disables frame drop.

[HDMI TIME CODE OUTPUT]

Choose whether time codes are output to HDMI devices.

Options
[ON] [OFF]