Enter a search term and click .

Computers connected via USB or wireless LAN can be used to control the camera and take photographs remotely or to download pictures from the camera for storage.


Tethered Photography via USB

Connect the camera to a computer via USB for tethered photography.

  1. Select either [AUTO] or [POWER SUPPLY OFF/COMM ON] for [USB POWER SUPPLY/COMM SETTING] in the network/USB setting menu.

  2. Choose either [3: USB TETHER SHOOTING AUTO] or [4: USB TETHER SHOOTING FIXED] for [SELECT CONNECTION SETTING].

    if [3: USB TETHER SHOOTING AUTO] is selected, tethered photography will be enabled automatically when the computer to which the camera is connected is turned on. When the computer is off or not connected, tethered photography will be suspended and pictures will be saved to the camera memory card.

    If the camera is disconnected from the computer while [4: USB TETHER SHOOTING FIXED] is selected, it will continue to function in tethered mode and no pictures will be recorded.

  3. Connect the camera to the computer via USB and then turn the camera on (aConnecting the Camera and Computer).

  4. Take pictures via tethered photography.

    Use software such as “Adobe Lightroom Classic + FUJIFILM Tether Shooting Plug-in”, “FUJIFILM X Acquire”, or “Capture One”.

To take pictures when using X Acquire, use the shutter button on the camera.

For more information on tethered photography, visit the website below.

aTethered Shooting

Visit the website below for information on the software used.

aSoftware

Tethered Photography via Wireless LAN

Connect to a wireless LAN to use a computer on the network for tethered photography.

  1. Select [CREATE/EDIT CONNECTION SETTING] > [CREATE USING WIZARD] in the network/USB setting menu and choose [TETHERED SHOOTING] (aNetwork/USB Setting Menus).

  2. Select [CREATE NEW].

    Choose [SELECT FROM LIST] to select from a list of existing connection setting profiles.

  3. Press [MENU/OK] when prompted.

  4. Select [WIRELESS LAN].

  5. Select [CREATE NEW] to create a new communication setting profile.

    You can also select or edit existing profiles.

  6. Adjust wireless LAN settings.

  7. After adjusting wireless LAN settings, select [NEXT].

  8. Name the communication setting profile.

  9. Save the connection setting profile.

    Press [MENU/OK].

  10. Select [CREATE NEW].

  11. Name the connection setting profile.

  12. Choose [SELECT].

    The connection setting profile can also be selected later using [SELECT CONNECTION SETTING].

  13. Take pictures remotely from the computer.

    Use software that supports tethered photography.

For more information on tethered photography, visit the website below.

aTethered Shooting

Visit the website below for information on the software used.

aSoftware

Simple Access Point Connections

Connect to a computer for tethered photography using the simple setup feature on your wireless LAN router.

  1. Select [SIMPLE SETUP].

    To select a wireless LAN router or enter the router SSID manually, choose [MANUAL SETUP].

  2. Follow the on-screen instructions to ready the wireless LAN router.

    You also have the option of connecting using a PIN. Display the camera PIN by pressing the focus stick (focus lever) up and enter it on the wireless LAN router.

  3. Press [MENU/OK] when setup is complete.

Connecting Using an IP Address

Connect to a computer for tethered photography using a manually-created network/USB setting profile giving the IP address and other network settings.

  1. Select [MANUAL].

    Select [AUTO] to assign the camera an IP address automatically.

  2. Enter an IP address.

    Select [IP ADDRESS] and enter an IP address.

    Select [SUBNET MASK] and enter a subnet mask.

    Select [GATEWAY ADDRESS] and enter a gateway address.

    Select [DNS SERVER ADDRESS] and enter a DNS server address.