This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Automatically vary settings over a series of pictures.

  1. Rotate the drive dial to BKT.

  2. Navigate to DRIVE SETTING in the SHOOTING SETTING menu and select AE BKT, ISO BKT, FILM SIMULATION BKT, WHITE BALANCE BKT, or DYNAMIC RANGE BKT.

    This feature can also be accessed via shortcuts (Shortcut Options).

  3. Take photographs.

AE BKT

Use SHOOTING SETTING > DRIVE SETTING > BKT SETTING > AE BKT SETTING to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount.

Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.

ISO BKT

Select a bracketing amount (±1, ±2/3, or ±1/3). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount.

FILM SIMULATION BKT

Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings, chosen using SHOOTING SETTING > DRIVE SETTING > BKT SETTING > FILM SIMULATION BKT.

WHITE BALANCE BKT

Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.

DYNAMIC RANGE BKT

Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third.

While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends.