GThe Shooting Menus (AF/MF SETTING)
Adjust focus settings.
To display focus settings, press MENU/OK in the shooting display and select the G (AF/MF SETTING) tab.
The options available vary with the shooting mode selected.
Choose the focus area for autofocus, manual focus, and focus zoom.
Choose how the camera focuses.
|Focus manually using the lens focus ring. Choose for manual control of focus or in situations in which the camera is unable to focus using autofocus (aManual Focus).|
|Focus is continually adjusted to reflect changes in the distance to the subject while the shutter button is pressed halfway. Use for subjects that are in motion.|
|Focus locks while the shutter button is pressed halfway. Choose for stationary subjects.|
Regardless of the option selected, manual focus will be used when the lens is in manual focus mode.
If ON is selected for GAF/MF SETTING > PRE-AF, focus will be adjusted continuously in modes l and k even when the shutter button is not pressed.
Choose how the camera focuses in modes l and k.
|The camera focuses on the subject in the selected focus point. The number of focus points available can be selected using GAF/MF SETTING > NUMBER OF FOCUS POINTS. Use for pin-point focus on a selected subject.|
|The camera focuses on the subject in the selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects that are in motion.|
The camera may be unable to focus on small objects or subjects that are moving rapidly.
|Rotate the rear command dial in the focus-point selection display (aSelecting a Focus Point, aThe Focus-Point Display) to cycle through AF modes in the following order: rSINGLE POINT, yZONE, and zWIDE/TRACKING.|
NUMBER OF FOCUS POINTS
Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected for AF MODE.
|117 POINTS (9 × 13)||Choose from 117 focus points arranged in a 9- by 13-point grid.|
|425 POINTS (17 × 25)||Choose from 425 focus points arranged in a 17- by 25-point grid.|
If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway. The camera adjusts focus continuously, allowing it to focus faster when the shutter button is pressed halfway. Choosing this option helps prevent missed shots.
Choosing ON increases the drain on the battery.
If ON is selected, the AF-assist illuminator will light to assist autofocus.
The AF-assist illuminator turns off automatically when OFF is selected for DUSER SETTING > SOUND & FLASH in the setup menu.
The camera may be unable to focus using the AF-assist illuminator in some cases.
If the camera is unable to focus, try increasing the distance to the subject.
Avoid shining the AF-assist illuminator directly into your subject’s eyes.
FACE/EYE DETECTION SETTING
Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits. Choose for shots that emphasize portrait subjects. You can also choose whether the camera detects and focuses on either the left or right eye when Intelligent Face Detection is on.
|FACE DETECTION ON||
Adjust settings for Intelligent Face Detection. You can also adjust eye detection settings.
|OFF||Intelligent Face Detection and eye priority off.|
If the subject moves as the shutter button is pressed, the face may not be in the area indicated by the green border when the picture is taken.
In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject.
FACE DETECTION ON > uEYE AUTO is selected automatically in SADVANCED SR AUTO, hPORTRAIT ENHANCER (Z), and scene position hPORTRAIT modes.
The face selected by the camera is indicated by a green border.
If multiple faces are detected, the subject closest to the center of the frame will be indicated by a green border and the remaining subjects by white borders.
Faces can be detected with the camera in vertical or horizontal orientation.
If the camera is unable to detect the subject’s eyes because they are hidden by hair, glasses, or other objects, the camera will instead focus on faces.
If ON is selected in focus mode l and focus has been locked (whether by pressing the shutter button halfway or by other means), focus lock can be ended and focus adjusted manually by rotating the focus ring.
Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator.
If the lens is equipped with a focus distance indicator, set the focus ring to the center, as the camera may fail to focus if the ring is set to infinity or the minimum focus distance.
To assist focus using focus peaking, select FOCUS PEAK HIGHLIGHT for MF ASSIST.
AF + MF Focus Zoom
When ON is selected for GAF/MF SETTING > FOCUS CHECK and SINGLE POINT selected for AF MODE, focus zoom can be used to zoom in on the selected focus area.
Choose how focus is displayed in manual focus mode.
|STANDARD||Focus is displayed normally.|
|FOCUS PEAK HIGHLIGHT||The camera heightens high-contrast outlines. Choose a color and peaking level.|
If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode.
Press the focus stick (focus lever) to cancel focus zoom.
The zoom position is centered on the current focus area and changes when the focus area is changed.
INTERLOCK SPOT AE & FOCUS AREA
Select ON to meter the current focus frame when SINGLE POINT is selected for AF MODE and SPOT is selected for PHOTOMETRY.
Choose how the camera focuses in focus mode AF-S (l) or AF-C (k).
|RELEASE||Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus.|
|FOCUS||Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus.|
TOUCH SCREEN MODE
Choose whether touch controls can be used to select the focus area or release the shutter (aTouch Screen Mode).