Enter a search term and click .

Adjust shooting options.


To display shooting options, press MENU/OK in the shooting display and select the A (SHOOTING SETTING) tab.

The options available vary with the shooting mode selected.

SCENE POSITION

Choose a scene for SP mode (aSP SCENE POSITION ).

ADVANCED FILTER

Choose an advanced filter for Adv. mode (aAdv. Advanced Filters).

CLARITY FILTER SETTING

Adjust the strength of the Adv. mode clarity filter. The higher the value, the greater the clarity.

Options
-2 -1 0 +1 +2

INTERVAL TIMER SHOOTING

Configure the camera to take photos automatically at a preset interval. If desired, frames shot using interval timer shooting can be joined to form a time-lapse movie.

  1. Highlight ASHOOTING SETTING > INTERVAL TIMER SHOOTING in the shooting menu and press MENU/OK.

  2. Use the focus stick (focus lever) to choose the interval and number of shots. Press MENU/OK to proceed.

  3. Highlight one of the following recording types and press MENU/OK.

    • STILL: Each photo is recorded separately.
    • STILL + TIME-LAPSE MOVIE: Each photo is recorded separately; in addition, the entire sequence is recorded as a time-lapse movie.

    The frame size and rate for the time-lapse movie can be selected using TIME-LAPSE MOVIE MODE before shooting begins.

  4. Use the focus stick to choose the starting time and then press MENU/OK.

  5. Shooting will start automatically.

Interval timer photography cannot be used at a shutter speed of “bulb” during panorama or multiple exposure photography, or when HDR ART is selected in advanced filter mode. In burst mode, only one picture will be taken each time the shutter is released.

Use of a tripod is recommended.

Check the battery level before starting. We recommend using an optional AC-9V AC power adapter and CP-W126 DC coupler.

The display turns off between shots and lights a few seconds before the next shot is taken.

The display can be activated at any time by pressing the shutter button.

TIME-LAPSE MOVIE MODE

Choose the frame size and rate for time-lapse movies.

Option Frame size Rate
V29.97P 1 3840 × 2160 (4K) 29.97 fps
V25P 1 25 fps
V24P 1 24 fps
V23.98P 1 23.98 fps
W59.94P 1920 × 1080 (Full HD) 59.94 fps
W50P 50 fps
W29.97P 29.97 fps
W25P 25 fps
W24P 24 fps
W23.98P 23.98 fps
h59.94P 1280 × 720 (HD) 59.94 fps
h50P 50 fps
h29.97P 29.97 fps
h25P 25 fps
h24P 24 fps
h23.98P 23.98 fps
n59.94P 1080 × 1080 (Full HD) 59.94 fps
n50P 50 fps
n29.97P 29.97 fps
n25P 25 fps
n24P 24 fps
n23.98P 23.98 fps
m59.94P 720 × 720 (HD) 59.94 fps
m50P 50 fps
m29.97P 29.97 fps
m25P 25 fps
m24P 24 fps
m23.98P 23.98 fps

1 Use a memory card with a UHS speed class of 3 or better when recording time-lapse movies that will be viewed on the camera.

AE BKT SETTING

Adjust exposure bracketing settings (aAE BKT).

FRAMES/STEP SETTING

Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot.

Option Description
FRAMES Choose the number of shots in the bracketing sequence.
STEP Choose the amount exposure is varied with each shot.

1 FRAME/CONTINUOUS

Choose whether the shots in the bracketing sequence are taken one at a time or in a single burst.

Option Description
1 FRAME The shots in the bracketing sequence are taken one at a time.
CONTINUOUS The shots in the bracketing sequence are taken in a single burst.

SEQUENCE SETTING

Choose the order in which the shots are taken.

Option Description
0 → + → – The first shot is taken at current exposure settings and exposure compensation is then modified over the succeeding shots, proceeding in order from the highest to the lowest value.
0 → – → + The first shot is taken at current exposure settings and exposure compensation is then modified over the succeeding shots, proceeding in order from the lowest to the highest value.
– → 0 → + Shooting proceeds in order from the lowest to the highest value.
+ → 0 → – Shooting proceeds in order from the highest to the lowest value.

FILM SIMULATION BKT

Choose the three film simulation types used for film simulation bracketing (aFILM SIMULATION BKT, aFILM SIMULATION).

LIGHT TRAIL SHOOTING SETTING

Adjust light trail settings (aLIGHT TRAIL).

Long Exposure setting

Choose the maximum exposure time.

Options
30 MIN 1HOUR 3HOUR 6HOUR

RELEASE TYPE

Choose the operation performed when the shutter button is pressed during light trail photography.

Option Description
SHUTTER OPEN WHEN PRESSING The shutter opens while the shutter button is pressed.
SHUTTER CLOSED BY RE-PRESSING The exposure starts when the shutter button is pressed and ends when the shutter button is pressed a second time.

SELF-TIMER

Use the timer for group- or self-portraits, to prevent blur caused by camera shake, or to release the shutter automatically when selected conditions are met (aUsing the Self Timer).

PHOTOMETRY

Choose how the camera meters exposure.

The selected option will only take effect when GAF/MF SETTING > FACE/EYE DETECTION SETTING is OFF.

Mode Description
o
MULTI
The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution. Recommended in most situations.
v
SPOT
The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recommended with backlit subjects and in other cases in which the background is much brighter or darker than the main subject.
w
AVERAGE
Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white.

SHUTTER TYPE

Choose the shutter type. Choose the electronic shutter to mute the shutter sound.

Option Description
tMECHANICAL SHUTTER Take pictures with the mechanical shutter.
sELECTRONIC SHUTTER Take pictures with the electronic shutter.
tMECHANICAL+sELECTRONIC The camera chooses the mechanical or electronic shutter according to shooting conditions.

When using the electronic shutter, note the following:

  • Distortion may be visible in shots of moving subjects.
  • Distortion may also be visible in hand-held shots taken at high shutter speeds; use of a tripod is recommended.
  • Banding and fog may occur in shots taken under fluorescent lights or other flickering or erratic illumination.
  • When taking pictures with the shutter muted (aSHUTTER VOLUME), respect your subjects’ image rights and right to privacy.

The following restrictions apply when the electronic shutter is used:

  • “Extended” sensitivities are not available
  • Long exposure noise reduction has no effect
  • The flash cannot be used

IS MODE

Choose from the following image stabilization options:

Option Description
LCONTINUOUS+MOTION Image stabilization on. If +MOTION is selected, the camera will adjust shutter speed to reduce motion blur when moving objects are detected.
lCONTINUOUS
MSHOOTING+MOTION As above, except that image stabilization is performed only when the shutter button is pressed halfway (focus mode k only) or the shutter is released. If +MOTION is selected, the camera will adjust shutter speed to reduce motion blur when moving objects are detected.
mSHOOTING ONLY
OFF Image stabilization off. Choose this option when using a tripod.

+MOTION has no effect when sensitivity is set to a fixed value, and may also be unavailable at some other combinations of settings. The effect may vary with lighting conditions and the speed at which the object is moving.

This option is available only with lenses that support image stabilization.

ISO

Adjust the camera’s sensitivity to light.

Option Description
AUTO1
AUTO2
AUTO3
Sensitivity is automatically adjusted in response to shooting conditions.
200–12800 Adjust sensitivity manually. Selected value is shown in display.
L (100)
H (25600)
H (51200)
Choose for special situations. Note that mottling may appear in pictures taken at H, while L reduces dynamic range.

Sensitivity is not reset when the camera is turned off.

Adjusting Sensitivity

High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities.

AUTO

Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3.

Item Options Default
AUTO1 AUTO2 AUTO3
DEFAULT SENSITIVITY 200–6400 200
MAX. SENSITIVITY 400–6400 800 1600 3200
MIN. SHUTTER SPEED 1/500–1/4 SEC, AUTO AUTO

The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED.

If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY.

The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY.

If AUTO is selected for MIN. SHUTTER SPEED, the camera will automatically choose a minimum shutter speed approximately equal to the inverse of the lens’ focal length, in seconds (for example, if the lens has a focal length of 50 mm, the camera will choose a minimum shutter speed in the neighborhood of 1/50 s). The minimum shutter speed is not affected by the option selected for image stabilization.

MOUNT ADAPTOR SETTING

Adjust settings for M-mount lenses connected using an optional FUJIFILM M MOUNT ADAPTER.

Choosing a Focal Length

If the lens has a focal length of 21, 24, 28, or 35 mm, choose a matching option in the MOUNT ADAPTOR SETTING menu.

For other lenses, select option 5 or 6 to display the menu at right, press the selector right to display focal length settings, and use the selector to enter the focal length.

Distortion Correction

Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION distortion.

Color Shading Correction

Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner.

To use color shading correction, follow the steps below.

  1. Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle.

  2. Use the focus stick (focus lever) to adjust shading until there is no visible difference in color between the selected corner and the center of the image.

    • Press the focus stick left or right to adjust colors on the cyan–red axis.
    • Press the focus stick up or down to adjust colors on the blue–yellow axis.

To determine the amount required, adjust color shading correction while taking photos of blue sky or a sheet of gray paper.

Peripheral Illumination Correction

Choose from values between –5 and +5. Choosing positive values increases peripheral illumination, while choosing negative values reduces peripheral illumination. Positive values are recommended for vintage lenses, negative values to create the effect of images taken with an antique lens or a pinhole camera.

To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a sheet of gray paper.

TOUCH ZOOM

Enable touch digital zoom (aTouch Zoom).

Options
ON OFF

WIRELESS COMMUNICATION

Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to:

  • Control the camera and take pictures remotely
  • Receive pictures uploaded from the camera
  • Browse the pictures on the camera and download selected pictures
  • Upload location data to the camera

For downloads and other information, visit:

aFUJIFILM Camera Remote