This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Capture motion in a series of pictures.

  1. Rotate the drive dial to select CH (high-speed burst) or CL (low-speed burst).

  2. Navigate to DRIVE SETTING in the SHOOTING SETTING menu and choose a frame advance rate.

    This feature can also be accessed via shortcuts (Shortcut Options).

  3. Take photographs. The camera will take pictures while the shutter button is pressed; shooting ends when the shutter button is released or the memory card is full.

If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder.

Burst shooting may not begin if the space available on the memory card is insufficient.

Frame rate varies with the subject, shutter speed, sensitivity, and focus mode. Frame rates may slow and recording times increase as more shots are taken.

The flash turns off automatically; the previously-selected flash mode is restored when burst shooting is disabled.

Focus and Exposure

Select focus mode C to vary focus with shot; to vary exposure with each shot, select OFF for BUTTON/DIAL SETTING > SHUTTER AE.

Selecting CH restricts the choice of focus frames in focus mode C and limits Intelligent Face Detection to the area used for intelligent hybrid AF (TTL contrast-detect AF+phase-detection AF; Available Focus Points).

Exposure and focus tracking performance may vary with such factors as aperture, sensitivity, and exposure compensation.