This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Take pictures using autofocus.

  1. Use FAF/MF SETTING > FOCUS MODE to choose a focus mode (a Focus Mode).

  2. Use FAF/MF SETTING > AF MODE to choose an AF mode (a Autofocus Options (AF Mode)).

  3. Choose the position and size of the focus frame (a Focus-Point Selection).

  4. Take pictures.

For information on the autofocus system, visit:

a Auto Focus System Special Site

Focus Mode

Use the FOCUS MODE option in the FAF/MF SETTING menu to choose how the camera focuses.

  1. Press MENU/OK to display the menus.

  2. Select FAF/MF SETTING > FOCUS MODE in the shooting menu.

  3. Choose from the following options:

    Mode Description

    p

    MANUAL FOCUS

    Focus manually using the lens focus ring. Choose for manual control of focus or in situations in which the camera is unable to focus using autofocus (a Manual Focus).

    k

    CONTINUOUS AF

    Focus is continually adjusted to reflect changes in the distance to the subject while the shutter button is pressed halfway. Use for subjects that are in motion. Eye-detection AF is not available.

    l

    SINGLE AF

    Focus locks while the shutter button is pressed halfway. Choose for stationary subjects.

Regardless of the option selected, manual focus will be used when the lens is in manual focus mode.

If ON is selected for FAF/MF SETTING > PRE-AF, focus will be adjusted continuously in modes k and l even when the shutter button is not pressed.

The Focus Indicator

The focus indicator turns green when the subject is in focus and blinks white when the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing and are displayed continuously in mode k. j is displayed in manual focus mode.

Focus indicator

Autofocus Options (AF Mode)

Choose how the camera focuses in modes k and l.

  1. Press MENU/OK and go to the shooting menu.

  2. Select FAF/MF SETTING > AF MODE.

  3. Choose an AF mode.

How the camera focuses depends on the focus mode.

Focus Mode l (SINGLE AF)

Option Description Sample image

r

SINGLE POINT

Camera focuses on subject in selected focus point. Use for pin-point focus on selected subject.

y

ZONE

Camera focuses on subject in selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects in motion.

z

WIDE

Camera focuses automatically on high-contrast subjects; display shows areas in focus.

j

ALL

Rotate the sub-command dial in the focus-point selection display (a Selecting a Focus Point, The Focus-Point Display) to cycle through AF modes in the following order: rSINGLE POINT, yZONE, and zWIDE.

Focus Mode k (CONTINUOUS AF)

Option Description Sample image

r

SINGLE POINT

Focus tracks subject at selected focus point. Use for subjects moving toward or away from camera.

y

ZONE

Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably.

z

TRACKING

Focus tracks subjects moving through wide area of frame.

j

ALL

Rotate the sub-command dial in the focus-point selection display (a Selecting a Focus Point, The Focus-Point Display) to cycle through AF modes in the following order: rSINGLE POINT, yZONE, and zTRACKING.

Focus-Point Selection

Choose a focus point for autofocus.

Viewing the Focus-Point Display

  1. Press the selector up (AF) to view the focus-point display.

  2. Use the selector and sub-command dial to position the focus frame over the desired focus point.

Focus-area selection can also be accessed via the shooting menu.

Selecting a Focus Point

Use the selector to choose the focus point and the sub-command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode.

AF mode Selector DISP/BACK button Sub-command dial

Press

Press

Rotate

Press

r Select focus point Select center focus point Choose from 5 frame sizes Restore original size
y Choose from 3 frame sizes
z

Manual focus-point selection is not available when zWIDE/TRACKING is selected in focus mode l.

If jALL is selected for AF MODE, you can rotate the sub-command dial in the focus-point selection display (a The Focus-Point Display) to cycle through AF modes in the following order: rSINGLE POINT (5 frame sizes), yZONE (3 frame sizes), and either zWIDE (focus mode l) or zTRACKING (focus mode k).

The Focus-Point Display

The focus-point display varies with the option selected for AF mode.

Focus frames are shown by small squares (□), focus zones by the large squares.

r
SINGLE POINT

Choose single focus point.

y
ZONE

Choose from zones with 7 × 7, 5 × 5, or 3 × 3 focus points.

z
WIDE/TRACKING

Position focus frame over subject and press MENU/OK.

Available Focus Points

TTL contrast-detect AF offers more focus points (A) than intelligent hybrid AF (B), which combines phase-detection with TTL contrast-detect AF.

Burst Mode Focus-Frame Selection

When continuous high-speed (J) is selected for drive mode, the number of focus frames available in focus mode k drops.

Single point

Zone

Tracking

Autofocus

Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below.

  • Very shiny subjects such as mirrors or car bodies.
  • Subjects photographed through a window or other reflective object.
  • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
  • Insubstantial subjects, such as smoke or flame.
  • Subjects that show little contrast with the background.
  • Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a subject photographed against a backdrop of highly contrasting elements).

Checking Focus

To zoom in on the current focus area for precise focus, press the center of the sub-command dial. Press again to cancel zoom.

Normal display

Focus zoom

In focus mode l, zoom can be adjusted by rotating the sub-command dial. Focus zoom is not available in focus mode k or when FAF/MF SETTING > PRE-AF is on or an option other than SINGLE POINT is selected for AF MODE.