Enter a search term and click .

Adjust image quality settings for movies.


To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab.

The options available vary with the shooting mode selected.

FFILM SIMULATION

Options are the same as those for still photography, but settings must be adjusted separately (aFILM SIMULATION (Still Photography)).

FMONOCHROMATIC COLOR

Options are the same as those for still photography, but settings must be adjusted separately (aMONOCHROMATIC COLOR (Still Photography)).

FWHITE BALANCE

Options are the same as those for still photography, but settings must be adjusted separately (aWHITE BALANCE (Still Photography)).

FTONE CURVE

Options are the same as those for still photography, but settings must be adjusted separately (aTONE CURVE (Still Photography)).

FCOLOR

Options are the same as those for still photography, but settings must be adjusted separately (aCOLOR (Still Photography)).

FSHARPNESS

Options are the same as those for still photography, but settings must be adjusted separately (aSHARPNESS (Still Photography)).

FHIGH ISO NR

Options are the same as those for still photography, but settings must be adjusted separately (aHIGH ISO NR (Still Photography)).

FPERIPHERAL LIGHT CORRECTION

Select ON to enable peripheral illumination correction during movie recording.

Options
ON OFF

If ON is selected when a lens that does not transmit data to the camera is attached, peripheral illumination will be adjusted according to the option selected for HIMAGE QUALITY SETTING > xFMOUNT ADAPTER SETTING > PERIPHERAL ILLUMINATION CORRECTION in the shooting menu (aPeripheral Illumination Correction).

Select OFF if you notice banding in movies recorded using this option.

xFMOUNT ADAPTOR SETTING

This item is also found in the photo menus (axFMOUNT ADAPTOR SETTING (Still Photography)). Changes to one apply to the other.