The Setup Menus (SCREEN SETTING)

Make changes to display settings.

To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SET-UP.

EVF BRIGHTNESS

Adjust the brightness of the display in the electronic viewfinder.

Option	Description
AUTO	Automatic brightness adjustment.
MANUAL	Adjust brightness manually; choose from options between +5 and −7.

EVF COLOR

Adjust the hue of the display in the electronic viewfinder.

Options
+5	+4	+3	+2	+1	0	-1	-2	-3	-4	-5

EVF COLOR ADJUSTMENT

Adjust the color of the display in the electronic viewfinder.

Adjust colors using the focus stick (focus lever).
Press MENU/OK.

LCD BRIGHTNESS

Adjust monitor brightness.

Options
+5	+4	+3	+2	+1	0	-1	-2	-3	-4	-5

LCD COLOR

Adjust monitor hue.

Options
+5	+4	+3	+2	+1	0	-1	-2	-3	-4	-5

LCD COLOR ADJUSTMENT

Adjust the color of the display in the LCD monitor.

Adjust colors using the focus stick (focus lever).
Press MENU/OK.

IMAGE DISP.

Choose how long images are displayed after shooting.

Option	Description
CONTINUOUS	Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom.
1.5 SEC	Pictures are displayed for the selected time or until the shutter button is pressed halfway.
0.5 SEC
OFF	Pictures are not displayed after shooting.

Colors may differ slightly from those in the final image.

“Noise” mottling may be visible at high sensitivities.

AUTOROTATE DISPLAYS

Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.

Options
ON	OFF

PREVIEW EXP./WB IN MANUAL MODE

Choose whether to enable exposure and/or white balance preview in manual exposure mode.

Option	Description
PREVIEW EXP./WB	Enable exposure and white balance preview.
PREVIEW WB	Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp.
OFF	Disable exposure and white balance preview. Choose this option when using a flash or on other occasions on which exposure may change when the picture is taken.

NATURAL LIVE VIEW

Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor.

Option	Description
ON	The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of monochrome and sepia settings.
OFF	The effects of film simulation, white balance, and other settings can be previewed in the monitor.

FRAMING GUIDELINE

Choose a framing grid for shooting mode.

	FGRID 9	GGRID 24	HHD FRAMING
	Option
Display
Display	For “rule of thirds” composition.	A six-by-four grid.	Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

Framing guides are not shown at default settings but can be displayed using DSCREEN SET-UP > DISP. CUSTOM SETTING (aDISP. CUSTOM SETTING).

AUTOROTATE PB

Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
ON	OFF

FOCUS SCALE UNITS

Choose the units used for the focus distance indicator.

Options
METERS	FEET

DUAL DISPLAY SETTING

Choose the content of the two windows in the dual display.

Option	Description
R:FOCUS L:FRAME	The right (small) window shows a close-up of the focus area, while the left (large) window shows the entire frame.
R:FRAME L:FOCUS	The right (small) window shows the entire frame, while the left (large) window shows a close-up of the focus area.

DISP. CUSTOM SETTING

Choose the items shown in the standard indicator display.

In shooting mode, use the DISP/BACK button to display standard indicators.
Press MENU/OK and select DSCREEN SET-UP > DISP. CUSTOM SETTING in the D (SET UP) tab.

Highlight items and press MENU/OK to select or deselect.

Item	Default
FRAMING GUIDELINE	R
ELECTRONIC LEVEL	R
FOCUS FRAME	R
AF DISTANCE INDICATOR	R
MF DISTANCE INDICATOR	R
HISTOGRAM	R
LIVE VIEW HIGHLIGHT ALERT	R
SHOOTING MODE	R
APERTURE/S-SPEED/ISO	R
INFORMATION BACKGROUND	R
Expo. Comp. (Digit)	R
Expo. Comp. (Scale)	R
FOCUS MODE	R
PHOTOMETRY	R
SHUTTER TYPE	R
FLASH	R
CONTINUOUS MODE	R
DUAL IS MODE	R
TOUCH SCREEN MODE	R
WHITE BALANCE	R
FILM SIMULATION	R
DYNAMIC RANGE	R
BOOST MODE	R
FRAMES REMAINING	R
IMAGE SIZE/QUALITY	R
MOVIE MODE & REC. TIME	R
35mm FORMAT MODE	R
IMAGE TRANSFER ORDER	R
MIC LEVEL	R
GUIDANCE MESSAGE	R
BATTERY LEVEL	R
FRAMING OUTLINE	R

Press DISP/BACK to save changes.
Press DISP/BACK as needed to exit the menus and return to the shooting display.

LARGE INDICATORS MODE(EVF)

Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using DSCREEN SET-UP > LARGE INDICATORS DISP. SETTING.

OFF	ON

Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF) (aThe Electronic Viewfinder).

If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (aFUNCTION (Fn) SETTING, Assigning Roles to the Function Buttons).

LARGE INDICATORS MODE(LCD)

Select ON to display large indicators in the LCD monitor. The indicators displayed can be selected using DSCREEN SET-UP > LARGE INDICATORS DISP. SETTING.

OFF	ON

Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(LCD) (aThe LCD Monitor).

LARGE INDICATORS DISP. SETTING

Choose the indicators displayed when ON is selected for DSCREEN SET-UP > LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD).

Option	Description
AExpo. DISP.	Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press MENU/OK.
BdScale	Select ON to display the exposure indicator.
CL1, L2, L3, L4	Choose up to four large icons for display on the left side of the screen.
DR1, R2, R3, R4	Choose up to four large icons for display on the right side of the screen.

INFORMATION CONTRAST ADJ.

Adjust display contrast.

Option	Description
HIGH CONTRAST	High contrast.
STANDARD	Normal contrast.
LOW CONTRAST	Low contrast.
DARK AMBIENT LIGHTING	Contrast adjusted for dim ambient lighting.

SUB MONITOR SETTING

Choose the indicators displayed in the secondary LCD monitor. Separate displays are available for still photography and movie recording. Choose from the following:

Option	Description
INFORMATION	Display camera settings. You can choose the settings displayed.
DIALS	Display dials showing ISO sensitivity and shutter speed.
HISTOGRAM	Display a histogram.

You can switch between displays by pressing the secondary LCD monitor mode button.

The INFORMATION Display

Follow the steps below to choose the indicators shown in the INFORMATION display.

Select D SCREEN SET-UP > SUB MONITOR SETTING in the setup menu.
Highlight STILL MODE or MOVIE MODE and press MENU/OK.
Highlight INFORMATION and press MENU/OK.
Highlight the indicator you wish to change and press MENU/OK.
Highlight the indicator you wish to display and press MENU/OK.

Choose from:

SHUTTER SPEED

APERTURE

EXPO. COMP.

ISO

MOVIE MODE

SHOOTING MODE

PHOTOMETRY

DRIVE MODE

FOCUS MODE

WHITE BALANCE

IMAGE SIZE/QUALITY

SHUTTER TYPE

FILM SIMULATION

DYNAMIC RANGE

35mm FORMAT MODE

BOOST MODE

DUAL IS MODE

SELF-TIMER

NONE
Repeat Steps 4 and 5 to change additional indicators.

The d Scale indicator can only be enabled or disabled.

d Scale

REAR SUB MONITOR SETTING

Choose the indicators displayed in the rear secondary monitor. Separate displays are available for still photography and movie recording. Choose from the following:

Option	Description
INFORMATION 1	Display a preset selection of indicators (INFORMATION 1 or INFORMATION 2).
INFORMATION 2
d Scale	Display an exposure indicator.
HISTOGRAM	Display a histogram.
OFF	Turn the rear secondary monitor off.

The INFORMATION 1 and INFORMATION 2 Displays

Follow the steps below to choose the indicators shown in the INFORMATION 1 or INFORMATION 2 display.

Select D SCREEN SET-UP > REAR SUB MONITOR SETTING in the setup menu.
Highlight STILL MODE or MOVIE MODE and press MENU/OK.
Highlight INFORMATION 1 or INFORMATION 2 and press MENU/OK.
Highlight the indicator you wish to change and press MENU/OK.
Highlight the indicator you wish to display and press MENU/OK.

Choose from:

SHUTTER SPEED

APERTURE

EXPO. COMP.

ISO

MOVIE MODE

FRAMES REM.

REC. TIME

SHOOTING MODE

PHOTOMETRY

DRIVE MODE

FOCUS MODE

WHITE BALANCE

IMAGE SIZE/QUALITY

BATTERY LEVEL

SHUTTER TYPE

FILM SIMULATION

DYNAMIC RANGE

IMAGE TRANSFER ORDER

35mm FORMAT MODE

H.265(HEVC)/H.264

MOVIE COMPRESSION

HIGHLIGHT TONE

SHADOW TONE

COLOR

SHARPNESS

NOISE REDUCTION

GRAIN EFFECT

COLOR CHROME EFFECT

COLOR CHROME FX BLUE

SMOOTH SKIN EFFECT

BOOST MODE

DUAL IS MODE

FLASH

SELF-TIMER

NONE
Repeat Steps 4 and 5 to change additional indicators.

SUB MONITOR BACKGROUND COLOR

Adjusting the background color of the secondary LCD monitor according to lighting conditions makes the display easier to read.

Option	Description
BLACK	Recommended for use with dark ambient lighting.
WHITE	Recommended for use with bright ambient lighting.

The background is displayed in white when the secondary LCD monitor backlight is on.

REAR SUB MONITOR BRIGHTNESS

Adjust the brightness of the rear secondary monitor.

Options
+5	+4	+3	+2	+1	0	-1	-2	-3	-4	-5

DThe Setup Menus (SCREEN SETTING)