Enter a search term and click .

The batteries are not charged at shipment. Before use, charge the batteries in the supplied battery charger.

The camera is supplied with NP-T125 batteries.

Charging takes about 140 minutes.

  1. Connect the plug adapter.

    The plug adapter supplied with the camera varies with the country or region of purchase; use the adapter appropriate to your country or region as described in the enclosed notice.

  2. Place the battery in the charger.

    Insert the battery in the orientation shown by the arrow.

  3. Plug the charger in.

    Plug the charger into an indoor power outlet. The charging indicator will light.

  4. Charge the battery.

    Remove the battery when charging is complete.

The Charging Indicator

The charging indicator shows battery charge status as follows:

Charging indicator Battery status Action
Off Battery not inserted. Insert the battery.
Battery fully charged. Remove the battery.
On Battery charging.
Blinks Battery fault. Unplug the charger and remove the battery.

The supplied charger is compatible with power supplies of 100 to 240 volts (a plug adapter may be needed for overseas use).

Do not affix labels or other objects to the battery. Failure to observe this precaution could make it impossible to remove the battery from the camera.

Do not short the battery terminals. The battery could overheat.

Read the cautions in “The Battery and Power Supply”.

Use only genuine Fujifilm rechargeable batteries designated for use in this camera. Failure to observe this precaution could result in product malfunction.

Do not remove the labels from the battery or attempt to split or peel the outer casing.

The battery gradually loses its charge when not in use. Charge the battery one or two days before use.

If the battery fails to hold a charge, it has reached the end of its charging life and must be replaced.

Unplug the charger when it is not in use.

Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging.

Note that charging times increase at low or high temperatures.

Charging via AC Adapter

The battery inserted in the camera will also charge when the camera is powered by an optional AC‑15V AC adapter. Charging takes about 120 minutes.

Battery charge status is shown by battery status icons when the camera is on (playback mode) and by the two lamps designated as ”indicator lamp 2“ when the camera is off. The left lamp shows the status of battery in chamber ”L“, the right lamp that of the battery in chamber ”R“.

Battery status icon (camera on) Indicator lamp 2 (camera off) Battery status
Y (yellow) On Battery charging
N (green) Off Charging complete
Z (red) Blinks Battery fault

Charging times may increase if the camera is left on during charging.

The camera will display an ”external power source“ icon when powered via an AC-15V AC adapter.

Charging from a Computer or Portable Battery

The batteries also charge if the camera is connected to a computer or portable battery. Turn the camera off, insert the batteries, and connect a USB cable.

USB connector (Type-C)

Battery status is shown by indicator lamp 2.

Indicator lamp 2 Battery status
On Battery charging
Off Charging complete
Blinks Battery fault

Connect the camera directly to the computer; do not use a USB hub or keyboard.

Charging stops if the computer enters sleep mode. To resume charging, activate the computer and disconnect and reconnect the USB cable.

Charging may not be supported depending on the model of computer, computer settings, and the computer’s current state.

Information on supported portable batteries is available on the Fujifilm website.

If the camera is turned on during charging, charging will end and the battery level will begin to gradually decline.

The camera will display an “external power source” icon when powered via USB.