Enter a search term and click .

Connect the camera to a computer to download pictures or take pictures remotely.

Before downloading pictures or taking pictures remotely, connect the camera to a computer and check that it functions normally.

  1. Turn the computer on.

  2. Adjust settings according to whether you will be using the camera for tethered shooting, copying pictures to a computer, save RAW pictures in other formats, or Saving and Loading Camera Settings.

  3. Turn the camera off.

  4. Connect a USB cable.

    USB connector (Type-C)

    The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer.

  5. Turn the camera on.

  6. Copy pictures to your computer.

    Tethered shooting: During tethered shooting, you can copy pictures using tethered shooting software such as the Capture One Pro Fujifilm/Adobe® Photoshop® Lightroom® Classic CC + FUJIFILM Tether Shooting Plug-in PRO for GFX/FUJIFILM X Acquire.

    Image transfer: Use MyFinePix Studio or applications provided with your operating system.

    RAW conversion: Process RAW images using FUJIFILM X RAW STUDIO. The power of the camera’s image processing engine is used for rapid processing.

    Saving and loading camera settings: Use FUJIFILM X Acquire to save or load camera settings. Save your preferred settings to a file in a single operation and copy them to multiple cameras.

Turn the camera off before disconnecting the USB cable.

When connecting USB cables, be sure the connectors are fully inserted in the correct orientation. Connect the camera directly to the computer; do not use a USB hub or keyboard.

Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or fully-charged battery before connecting the camera.

If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.

Make sure that the indicator lamp is off or lit green before turning the camera off.

Do not disconnect the USB cable while transfer is in progress. Failure to observe this precaution could result in loss of data or damage to the memory card.

Disconnect the camera before inserting or removing memory cards.

In some cases, it may not be possible to access pictures saved to a network server using the software in the same way as on a standalone computer.

Do not immediately remove the camera from the system or disconnect the USB cable once the message stating that copying is in progress clears from the computer display. If the number of images copied is very large, data transfer may continue after the message has ceased to be displayed.

The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection.

Tethered Shooting: Capture One Pro Fujifilm/Adobe® Photoshop® Lightroom® Classic CC+FUJIFILM Tether Shooting Plug-in PRO for GFX/FUJIFILM X Acquire

Before proceeding, select USB TETHER SHOOTING AUTO for DCONNECTION SETTING > CONNECTION MODE in the camera menus.

Capture One Pro Fujifilm, Adobe® Photoshop® Lightroom® Classic CC + FUJIFILM Tether Shooting Plug-in PRO for GFX, and FUJIFILM X Acquire can be used for tethered shooting.

Choose USB TETHER SHOOTING FIXED if the camera will be used solely for tethered shooting. Note that if the USB cable is disconnected, the camera will continue to function in tethered mode and pictures will not be saved to the camera memory card.

For more information, visit the following website:

aTethered Shooting

For more information on Capture One Pro Fujifilm, Adobe® Photoshop® Lightroom® Classic CC + FUJIFILM Tether Shooting Plug-in PRO for GFX, and FUJIFILM X Acquire, see “Software for Use with Your Camera”.

Copying Pictures to a Computer

Before copying pictures to a computer, select USB CARD READER for DCONNECTION SETTING > CONNECTION MODE.

The software that can be used to copy pictures varies with your computer operating system.

Mac OS X/macOS

Pictures can be copied to your computer using Image Capture (supplied with your computer) or other software.

Use a card reader to copy files over 4 GB in size.

Windows

Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized, and printed.

For more information on MyFinePix Studio, see “Software for Use with Your Camera”.

Converting RAW Images: FUJIFILM X RAW STUDIO

Before proceeding, select USB RAW CONV./BACKUP RESTORE for DCONNECTION SETTING > CONNECTION MODE in the camera menus.

FUJIFILM X RAW STUDIO can be used to convert RAW images to JPEG or TIFF images.

For more information on FUJIFILM X RAW STUDIO, see “Software for Use with Your Camera”.

Backing up and Restoring Camera Settings (FUJIFILM X Acquire)

Before proceeding, select USB RAW CONV./BACKUP RESTORE for DCONNECTION SETTING > CONNECTION MODE in the camera menus.

FUJIFILM X Acquire can be used to backup and restore camera settings.

For more information on FUJIFILM X Acquire, see “Software for Use with Your Camera”.