Enter a search term and click .

AFn2 button

BSecondary LCD monitor mode button

CSecondary LCD monitor

DSecondary monitor backlight button

EHot shoe

FDRIVE mode dial release button

GDRIVE button

HDRIVE mode dial

IAF-assist illuminator
Self-timer lamp

JStrap eyelet

KConnector cover 1

LConnector cover 2

MSync terminal

NLens signal contacts

OBattery tray latch

PBattery tray

QVertical grip front command dial

RVertical grip Fn3 button

SLens release button

TFn3 button

UFront command dial

VON/OFF switch

WShutter button

XFn1 button
d (exposure compensation) button

YMicrophone jack

ZHeadphone jack

aUSB connector (Type-C)

bHDMI Micro connector (Type D)

c15 V DC-IN connector

dHot shoe cover

eBody cap


fb (delete) button

gAE-L (exposure lock) button

hFocus stick (focus lever)

iFocus mode selector

jAF-ON button

kRear command dial

lFn4 button

mQ (quick menu) button

nIndicator lamp 1

oMemory card slot cover

pMemory card slot cover latch

qRemote release connector cover

rIndicator lamp 2

sRear secondary monitor

tLCD monitor (LCD)
Touch screen

ua (playback) button

vDISP (display)/BACK button

wMENU/OK button

xMemory card slot 1

yMemory card slot 2

zRemote release connector


0Vertical grip focus stick (focus lever)

1Vertical grip AF-ON button

2Vertical grip rear command dial

3Vertical grip Fn2 button

4Vertical grip Fn1 button
d (exposure compensation) button

5Vertical grip shutter button

6Vertical grip control lock

7Speaker

8Vertical grip Fn4 button

9Vertical grip Q (quick menu) button

-Tripod mount

^Fn5 button

\Vertical grip AE-L (exposure lock) button

The Cable Protector

AThe cable protector prevents accidental disconnection of the USB cable or AC adapter. Attach the protector as shown and tighten the lock screw.

BConnect the cable and pass it through the protector as shown.

The Serial Number Plate

Do not remove the serial number plate, which provides the FCC ID, KC mark, CMIIT ID, serial number, and other important information.

Serial number plate

The Focus Stick (Focus Lever)

Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus.

The DRIVE mode dial

The DRIVE mode dial is used to select the drive mode. Hold the DRIVE mode dial release button while rotating the dial to select the desired mode.

Option Description
STILL Take pictures one at a time or in bursts (aTaking Photographs (Mode P), Continuous Shooting (Burst Mode)).
MULTI Record a multiple exposures or take a series of photographs using bracketing (aBracketing, Multiple Exposures, PIXEL SHIFT MULTI SHOT).
MOVIE Shoot movies (aRecording Movies).

The DRIVE Button

Pressing the DRIVE button when STILL or MULTI is selected with the DRIVE mode dial displays drive mode options. Pressing the button when MOVIE is selected displays movie mode options (aMOVIE MODE).

Drive mode options (STILL)   Drive mode options (MULTI)

Drive mode options (MOVIE)

The Command Dials

Rotate or press the command dials to:

Rotate

Select menu tabs or page through menus

Choose the desired combination of shutter speed and aperture (program shift)

Adjust aperture 1, 2

View other pictures during playback

Press

Switch between aperture and ISO sensitivity 2

Press and hold to choose the option selected for D BUTTON/DIAL SETTING > COMMAND DIAL SETTING in the D (setup) menu

1 Can be changed using D BUTTON/DIAL SETTING > COMMAND DIAL SETTING.

2 If the lens is equipped with an aperture ring with a “C” position, the camera command dials can be used to adjust aperture when the aperture ring is rotated to C.

3 Available only if FOCUS CHECK is assigned to a function button.

4 Only if a value other than auto is selected for shutter speed.

Rotate

Highlight menu items

Choose the desired combination of shutter speed and aperture (program shift)

Choose a shutter speed 1, 4

Adjust exposure compensation by pressing the d button and rotating the dial 1

Adjust settings in the quick menu

Choose the size of the focus frame

Zoom in or out in full frame playback

Zoom in or out in multi-frame playback

Press

Zoom in on the active focus point 3

Press and hold to choose the manual focus mode focus display 3

Zoom in on the active focus point during playback

1 Can be changed using D BUTTON/DIAL SETTING > COMMAND DIAL SETTING.

2 If the lens is equipped with an aperture ring with a “C” position, the camera command dials can be used to adjust aperture when the aperture ring is rotated to C.

3 Available only if FOCUS CHECK is assigned to a function button.

4 Only if a value other than auto is selected for shutter speed.

The Indicator Lamp

Camera status is shown by the indicator lamp 1.

Indicator lamp 1 Camera status
Glows green Focus locked.
Blinks green Focus or slow shutter speed warning. Pictures can be taken.
Blinks green and orange

Camera on: Recording pictures. Additional pictures can be taken.

Camera off: Uploading pictures to a smartphone or tablet. *

Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks red Lens or memory error.

* Displayed only if pictures are selected for upload.

Warnings may also appear in the display.

The indicator lamp remains off while your eye is to the viewfinder.

If the camera is off, the two lamps designated as “indicator lamp 2” light green while the batteries are charging. The lamp on the right shows the status of the battery in the right battery chamber, that on the left the status of the battery in the left battery chamber (aCharging via AC Adapter).

The LCD Monitor

The LCD monitor can be tilted for easier viewing, but be careful not to touch the wires or trap fingers or other objects behind the monitor. Touching the wires could cause camera malfunction.

“Tall” (Portrait) Orientation

The display can also be tilted to take pictures from high or low angles when the camera is rotated to take pictures in “Tall” (portrait) orientation.

Press the tilt lock release and tilt the display as shown in Figure 1.

Figure 1

To take high-angle shots, hold the camera in the orientation shown in Figure 2.

Figure 2