Enter a search term and click .

Adjust image quality settings.


To display image quality settings, press [MENU/OK] in the shooting display and select the H[(IMAGE QUALITY SETTING)] tab.

The options available vary with the shooting mode selected.

[IMAGE SIZE]

Choose the size and aspect ratio at which still pictures are recorded.

Option Image size
O[3:2] 6240 × 4160
O[16:9] 6240 × 3512
O[1:1] 4160 × 4160
Option Image size
P[3:2] 4416 × 2944
P[16:9] 4416 × 2488
P[1:1] 2944 × 2944
Option Image size
Q[3:2] 3120 × 2080
Q[16:9] 3120 × 1760
Q[1:1] 2080 × 2080

The following options are available in [SPORTS FINDER MODE] and when [1.25X CROP] is selected in burst mode:

Option Image size
P[3:2]4992 × 3328
P[16:9]4992 × 2808
P[1:1]3328 × 3328

[IMAGE SIZE] is not reset when the camera is turned off or another shooting mode is selected.

[IMAGE QUALITY]

Choose a file format and compression ratio.

Option Description
[FINE] Low compression ratios are used for higher-quality images.
[NORMAL] Higher compression ratios are used to increase the number of images that can be stored.
[FINE + RAW] Record both RAW and fine-quality JPEG images.
[NORMAL + RAW] Record both RAW and normal-quality JPEG images.
[RAW] Record RAW images only.

The Function Buttons

To toggle RAW image quality on or off for a single shot, assign [RAW] to a function button (aAssigning Roles to the Function Buttons). Press the button once to select the option in the right column, again to return to the original setting (left column).

Option currently selected for [IMAGE QUALITY] Option selected by pressing function button to which [RAW] is assigned
[FINE] [FINE + RAW]
[NORMAL] [NORMAL + RAW]
[FINE + RAW] [FINE]
[NORMAL + RAW] [NORMAL]
[RAW] [FINE]

[RAW RECORDING]

Choose whether to compress RAW images.

Option Description
[UNCOMPRESSED] RAW images are not compressed.
[LOSSLESS COMPRESSED] RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be viewed in Capture One Express Fujifilm, RAW FILE CONVERTER EX powered by SILKYPIX, FUJIFILM X RAW STUDIO, or other software that supports “lossless” RAW compression.

[FILM SIMULATION]

Simulate the effects of different kinds of film, including black-and-white (with or without color filters). Choose a palette according to your subject and creative intent.

Option Description
c
[PROVIA/STANDARD]
Ideal for a wide range of subjects.
d
[Velvia/VIVID]
Vibrant reproduction, ideal for landscape and nature.
e
[ASTIA/SOFT]
Softer color and contrast for a more subdued look.
i
[CLASSIC CHROME]
Soft color and enhanced shadow contrast for a calm look.
g
[PRO Neg. Hi]
Ideal for portrait with slightly enhanced contrast.
h
[PRO Neg. Std]
Ideal for portrait with soft gradations and skin tones.
g
[CLASSIC Neg.]
Enhanced color with hard tonality to increase image depth.
X
[ETERNA/CINEMA]
Soft color and rich shadow tone suitable for film look movie.
a
[ACROS]

Shoot in Black and White In rich details with sharpness. Available with yellow ([Ye]), red ([R]), and green ([G]) filters, which deepen shades of gray corresponding to hues complementary to the selected color.

  • [ACROS+Ye FILTER]: Slightly enhances contrast and darkens skies.
  • [ACROS+R FILTER]: Enhances contrast and darkens skies considerably.
  • [ACROS+G FILTER]: Produces pleasing skin tones in portrait
b
[MONOCHROME]

Shoots in black and white. Available with yellow ([Ye]), red ([R]), and green ([G]) filters, which deepen shades of gray corresponding to hues complementary to the selected color.

  • [MONOCHROME+Ye FILTER]: Slightly enhances contrast and darkens skies.
  • [MONOCHROME+R FILTER]: Enhances contrast and darkens skies considerably.
  • [MONOCHROME+G FILTER]: Produces pleasing skin tones in portrait.
f
SEPIA
Shoots in sepia tone.

Film simulation options can be combined with tone and sharpness settings.

For more information, visit:

aThe World of Film Simulation

[MONOCHROMATIC COLOR]

Add a reddish or bluish tinge (warm or cool color cast) to the a[ACROS] and b[MONOCHROME] monochrome film simulations. Color can be adjusted on the [WARM][COOL] and [G] (Green)–[M] (Magenta) axes.

[GRAIN EFFECT]

Add a film grain effect.

[ROUGHNESS]

Option Description
[STRONG] Choose for rougher grains.
[WEAK] Choose for smoother grains.
[OFF] Turn the effect off.

[SIZE]

Option Description
[LARGE] Choose for coarser grains.
[SMALL] Choose for finer grains.

[COLOR CHROME EFFECT]

Increase the range of tones available for rendering colors that tend to be highly saturated, such as reds, yellows, and greens.

Option Description
[STRONG] Choose for a strong effect.
[WEAK] Choose for a weak effect.
[OFF] Turn the effect off.

[COLOR CHROME FX BLUE]

Increase the range of tones available for rendering blues.

Option Description
[STRONG] Choose for a strong effect.
[WEAK] Choose for a weak effect.
[OFF] Turn the effect off.

[WHITE BALANCE]

For natural colors, choose a white balance option that matches the light source.

Option Description
[AUTO] White balance is adjusted automatically.
k/l/m Measure a value for white balance.
k Choose a color temperature.
i For subjects in direct sunlight.
j For subjects in the shade.
k Use under “daylight” fluorescent lights.
l Use under “warm white” fluorescent lights.
m Use under “cool white” fluorescent lights.
n Use under incandescent lighting.
g Reduces the blue cast typically associated with underwater lighting.

In conditions in which [AUTO] fails to produce the desired results—for example, under certain types of lighting or in close-ups of portrait subjects—use custom white balance or choose a white balance option suited to the light source.

White balance is adjusted for flash lighting only in [AUTO] and gmodes. Turn the flash off using other white balance options.

White balance options can also be accessed via shortcuts (aShortcut Options).

Fine-Tuning White Balance

Pressing [MENU/OK] after selecting a white balance option displays a fine-tuning dialog; use the focus stick (focus lever) to fine-tune white balance.

To exit without fine-tuning white balance, press [DISP/BACK] after selecting a white balance option.

The focus stick (focus lever) does not tilt diagonally.

Custom White Balance

Choose k, l, or m to adjust white balance for unusual lighting conditions using a white object as a reference (colored objects can also be used to lend photos a color cast). A white balance target will be displayed; position and size the target so that it is filled by the reference object and press the shutter button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press [DISP/BACK], or press [MENU/OK] to select the most recent value and display the fine-tuning dialog).

  • If “[COMPLETED] !” is displayed, press [MENU/OK] to set white balance to the measured value.

  • If “[UNDER]” is displayed, raise exposure compensation and try again.
  • If “[OVER]” is displayed, lower exposure compensation and try again.

kColor Temperature

Changing the color temperature changes overall hue.

Color temperature can be adjusted to make pictures “warmer” or “colder” or deliberately produce colors that differ radically from those in real life.

  1. Select k in the white balance menu.

    A list of color temperatures will be displayed.

  2. Highlight a color temperature using the focus stick (focus lever) and press [MENU/OK].

    A fine-tuning dialog will be displayed.

    You can also adjust color temperature in increments of 10 K by rotating the rear command dial.

    To exit without fine-tuning white balance, press [DISP/BACK] after choosing a color temperature.

  3. Highlight a fine-tuning amount using the focus stick.

  4. Press [MENU/OK].

    The changes will be applied. The selected color temperature will appear in the display.

Color Temperature

Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources with a color temperature close to that of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature are tinged with blue.

[DYNAMIC RANGE]

Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights when photographing high-contrast scenes. Higher values are recommended for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn leaves, and portraits taken against a blue sky, and for white objects or people wearing white.

Options
[AUTO] V[100%] W[200%] X[400%]

Mottling may appear in pictures taken at higher values. Choose a value according to the scene.

If [AUTO] is selected, the camera will automatically choose either V[100%] or W[200%] according to the subject and shooting conditions. Shutter speed and aperture will be displayed when the shutter button is pressed halfway.

W[200%] is available at sensitivities of from ISO 320 to ISO 12800, X[400%] at sensitivities of from ISO 640 to 12800.

[D RANGE PRIORITY]

Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.

Option Description
[AUTO] Contrast is adjusted automatically in response to lighting conditions.
[STRONG] Adjust dynamic range by a large amount for very high-contrast scenes.
[WEAK] Adjust dynamic range by a smaller amount for moderately high-contrast scenes.
[OFF] Contrast reduction off.

[WEAK] is available at sensitivities of from ISO 320 to ISO 12800, [STRONG] at sensitivities of from ISO 640 to 12800.

When an option other than [OFF] is selected, [HIGHLIGHT TONE], [SHADOW TONE], and [DYNAMIC RANGE] will be adjusted automatically; if you wish to adjust these settings manually, choose [OFF].

[TONE CURVE]

With reference to a tone curve, use the focus stick (focus lever) to adjust the appearance of highlights or shadows, making them harsher or softer. Choose higher values to make shadows and highlights harsher, lower values to make them softer.

Options
[-2] [-1] [0] [+1] [+2] [+3] [+4]

[COLOR]

Adjust color density. Choose higher values to increase saturation, lower values to reduce it.

Options
[-4] [-3] [-2] [-1] [0] [+1] [+2] [+3] [+4]

[SHARPNESS]

Sharpen or soften outlines. Choose higher values for sharper outlines, lower values for softer outlines.

Options
[-4] [-3] [-2] [-1] [0] [+1] [+2] [+3] [+4]

[NOISE REDUCTION]

Reduce noise in pictures taken at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to leave outlines visible.

Options
[-4] [-3] [-2] [-1] [0] [+1] [+2] [+3] [+4]

[CLARITY]

Increase definition while altering tones in highlights and shadows as little as possible. Choose higher values for increased definition, lower values for a softer effect.

Options
[-5] [-4] [-3] [-2] [-1] [0] [+1] [+2] [+3] [+4] [+5]

[LONG EXPOSURE NR]

Select [ON] to reduce mottling in long time-exposures.

Options
[ON] [OFF]

[COLOR SPACE]

Choose the gamut of colors available for color reproduction.

Option Description
[sRGB] Recommended in most situations.
[Adobe RGB] For commercial printing.

[PIXEL MAPPING]

Use this option if you notice bright spots in your pictures.

  1. Press [MENU/OK] in the shooting display and select the H[IMAGE QUALITY SETTING] tab.

  2. Highlight [PIXEL MAPPING] and press [MENU/OK] to perform pixel mapping.

Results are not guaranteed.

Be sure the battery is fully charged before beginning pixel mapping.

Pixel mapping is not available when the camera temperature is elevated.

Processing may take a few seconds.

[SELECT CUSTOM SETTING]

Settings can be recalled from any of the seven custom settings banks.

Banks
[CUSTOM 1] [CUSTOM 2] [CUSTOM 3]
[CUSTOM 4] [CUSTOM 5] [CUSTOM 6]
[CUSTOM 7]

EDIT/SAVE CUSTOM SETTING

Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can be recalled using H[IMAGE QUALITY SETTING] > [SELECT CUSTOM SETTING].

  1. Select H[IMAGE QUALITY SETTING] in the shooting menu, then highlight [EDIT/SAVE CUSTOM SETTING] and press [MENU/OK].

  2. Highlight a custom settings bank and press [MENU/OK] to select.

  3. Highlight [EDIT] and press [MENU/OK]. A list of shooting menu options will be displayed.

    To store current camera settings in the selected bank, highlight [SAVE CURRENT SETTINGS] and press [MENU/OK].

    To restore default settings for the current bank, select [RESET].

    Banks can be renamed using [EDIT CUSTOM NAME].

  4. Highlight an item you wish to store in the custom settings bank and press [MENU/OK].
    Adjust settings for the selected item.

  5. Press [MENU/OK] to save changes to the selected item and return to the menu item list.
    Adjust additional items as desired.

  6. Pressing [DISP/BACK] in the menu item list displays a confirmation dialog. Highlight [OK] and press [MENU/OK] to save the settings to the selected bank.