Enter a search term and click .

Assign a role to the function buttons for quick access to the selected feature.


Touch-Function Gestures

The functions assigned to [T-Fn1] through [T-Fn4] can be accessed by flicking the monitor.

Touch-function gestures are disabled by default. To enable touch-function gestures, select [ON] for D[BUTTON/DIAL SETTING] > [TOUCH SCREEN SETTING] > c[TOUCH FUNCTION].

The default assignments are:

Function buttons Default

A[T-Fn1] (flick up)

[HISTOGRAM]

B[T-Fn2] (flick left)

[SPORTS FINDER MODE]

C[T-Fn3] (flick right)

[LARGE INDICATORS MODE]

D[T-Fn4] (flick down)

[ELECTRONIC LEVEL]

The Selector

The default assignments are:

Function buttons Default

A[Fn3] button

[PHOTOMETRY]

B[Fn5] button

[WHITE BALANCE]

C[Fn6] button

[PERFORMANCE]

D[Fn4] button

[FILM SIMULATION]

Back-of-Camera Function Buttons

The default assignments are:

Function buttons Default

A[AFON] button

[AF-ON]

BCenter of rear command dial

[FOCUS CHECK]

C[Fn1] button

[FACE DETECTION ON/OFF]

D[Q] button

[QUICK MENU]

E[AEL] button

[AE LOCK ONLY]

Front-of-Camera Function Buttons

The default assignments are:

Function buttons Default

A[Fn2] button

[DRIVE SETTING]

Assigning Roles to the Function Buttons

To assign roles to the buttons:

  1. Press and hold the [DISP/BACK] button until a control selection menu is displayed.

  2. Highlight the desired control and press [MENU/OK].

  3. Highlight any of the following options and press [MENU/OK] to assign it to the selected control.

The following cannot be assigned to the touch function buttons ([T-Fn1] through [T-Fn4]).

  • [CONSTANT SPEED ZOOM (T)]
  • [CONSTANT SPEED ZOOM (W)]
  • F[CONSTANT SPEED FOCUS (N)]
  • F[CONSTANT SPEED FOCUS (F)]
  • [AE LOCK ONLY]
  • [AF LOCK ONLY]
  • [AE/AF LOCK]
  • [AF-ON]
  • [AWB LOCK ONLY]

The selector cannot be assigned more than one role at a time.

Button assignments can also be selected using D[BUTTON/DIAL SETTING] > [FUNCTION (Fn) SETTING].

Roles That Can Be Assigned to the Function Buttons

Choose from:

  • [IMAGE SIZE]
  • [IMAGE QUALITY]
  • [RAW]
  • [FILM SIMULATION]
  • [GRAIN EFFECT]
  • [COLOR CHROME EFFECT]
  • [COLOR CHROME FX BLUE]
  • [DYNAMIC RANGE]
  • [D RANGE PRIORITY]
  • [WHITE BALANCE]
  • [CLARITY]
  • [SELECT CUSTOM SETTING]
  • [FOCUS AREA]
  • [FOCUS CHECK]
  • [AF MODE]
  • [AF-C CUSTOM SETTINGS]
  • [FACE SELECT] op
  • [FACE DETECTION ON/OFF]
  • [AF RANGE LIMITER]
  • [FOCUS CHECK LOCK]
  • [DRIVE SETTING]
  • [SPORTS FINDER MODE]
  • [PRE-SHOT] sJ
  • [SELF-TIMER]
  • [PHOTOMETRY]
  • [SHUTTER TYPE]
  • [FLICKER REDUCTION]
  • [ISO AUTO SETTING]
  • [IS MODE]
  • [MULTI EXPOSURE]
  • [WIRELESS COMMUNICATION]
  • [FLASH FUNCTION SETTING]
  • [TTL-LOCK]
  • [MODELING FLASH]
  • [FULL HD HIGH SPEED REC]
  • [FIX MOVIE CROP MAGNIFICATION] C
  • F [IS MODE BOOST]
  • [ZEBRA SETTING]
  • [INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT]
  • [4ch AUDIO PLAYBACK]
  • [MOVIE OPTIMIZED CONTROL] oL
  • [PREVIEW DEPTH OF FIELD]
  • [PREVIEW EXP./WB IN MANUAL MODE]
  • [NATURAL LIVE VIEW]
  • [HISTOGRAM]
  • [ELECTRONIC LEVEL]
  • [LARGE INDICATORS MODE]
  • [F-Log VIEW ASSIST]
  • [ZOOM/FOCUS CONTROL RING]
  • [CONSTANT SPEED ZOOM (T)]
  • [CONSTANT SPEED ZOOM (W)]
  • F[CONSTANT SPEED FOCUS (N)]
  • F[CONSTANT SPEED FOCUS (F)]
  • [AE LOCK ONLY]
  • [AF LOCK ONLY]
  • [AE/AF LOCK]
  • [AF-ON]
  • [AWB LOCK ONLY]
  • [APERTURE SETTING]
  • [LOCK SETTING]
  • [PERFORMANCE]
  • [AUTO IMAGE TRANSFER]
  • [SELECT PAIRING DESTINATION]
  • [Bluetooth ON/OFF]
  • [QUICK MENU]
  • [PLAYBACK]
  • [NONE] (control disabled)

[AF-ON]

If [AF-ON] is selected, you can press the control instead of keeping the shutter button pressed halfway.

[MODELING FLASH]

If [MODELING FLASH] is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash).

[TTL-LOCK]

If [TTL-LOCK] is selected, you can press the control to lock flash output according to the option selected for F[FLASH SETTING[] > [TTL-LOCK MODE] (a[TTL-LOCK MODE]).

[FACE SELECT]op

[FACE SELECT] op can be enabled or disabled by pressing the button to which [FACE SELECT] op is assigned. Enabling [FACE SELECT] op allows the focus stick (focus lever) or (during viewfinder photography) touch controls (aEVF) to be used to select the face that will be used for focus.

The following features can be accessed using the focus stick or during viewfinder photography when [FACE SELECT] op is enabled:

  • The face used to set focus can be selected using the focus stick. To switch from face detection to manual focus-area selection, press the center of the focus stick (focus lever) (aFocus-Point Selection). Press again to re-enable face detection.
  • The touch screen (monitor) or focus stick can be used to select the face used to set focus during viewfinder photography.

Lens Function Buttons

Choose the roles played by the function buttons on the lens (where applicable).

Lens Function Button Defaults

The default assignments are:

A XF18-120mmF4 LM PZ WR lens is used here for illustrative purposes.

Lens function buttons Default

AZ/F

[ZOOM/FOCUS CONTROL RING]

B[L-Fn1] (rocker zoom button pressed up)

[CONSTANT SPEED ZOOM (T)]

C[L-Fn2] (rocker zoom button pressed down)

[CONSTANT SPEED ZOOM (W)]

Assigning Roles to the Lens Function Buttons

The roles played by the lens function buttons can be selected using the D[BUTTON/DIAL SETTING] > [POWER ZOOM LENS FUNCTION (Fn) SETTING] option in the setup menu.

  • [IMAGE SIZE]
  • [IMAGE QUALITY]
  • [RAW]
  • [FILM SIMULATION]
  • [GRAIN EFFECT]
  • [COLOR CHROME EFFECT]
  • [COLOR CHROME FX BLUE]
  • [DYNAMIC RANGE]
  • [D RANGE PRIORITY]
  • [WHITE BALANCE]
  • [CLARITY]
  • [SELECT CUSTOM SETTING]
  • [FOCUS AREA]
  • [FOCUS CHECK]
  • [AF MODE]
  • [AF-C CUSTOM SETTINGS]
  • [FACE SELECT] op
  • [FACE DETECTION ON/OFF]
  • [AF RANGE LIMITER]
  • [FOCUS CHECK LOCK]
  • [DRIVE SETTING]
  • [SPORTS FINDER MODE]
  • [PRE-SHOT] sJ
  • [SELF-TIMER]
  • [PHOTOMETRY]
  • [SHUTTER TYPE]
  • [FLICKER REDUCTION]
  • [ISO AUTO SETTING]
  • [IS MODE]
  • [MULTI EXPOSURE]
  • [WIRELESS COMMUNICATION]
  • [FLASH FUNCTION SETTING]
  • [TTL-LOCK]
  • [MODELING FLASH]
  • [FULL HD HIGH SPEED REC]
  • [FIX MOVIE CROP MAGNIFICATION] C
  • F [IS MODE BOOST]
  • [ZEBRA SETTING]
  • [INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT]
  • [4ch AUDIO PLAYBACK]
  • [MOVIE OPTIMIZED CONTROL] oL
  • [PREVIEW DEPTH OF FIELD]
  • [PREVIEW EXP./WB IN MANUAL MODE]
  • [NATURAL LIVE VIEW]
  • [HISTOGRAM]
  • [ELECTRONIC LEVEL]
  • [LARGE INDICATORS MODE]
  • [F-Log VIEW ASSIST]
  • [ZOOM/FOCUS CONTROL RING]
  • [CONSTANT SPEED ZOOM (T)]
  • [CONSTANT SPEED ZOOM (W)]
  • F[CONSTANT SPEED FOCUS (N)]
  • F[CONSTANT SPEED FOCUS (F)]
  • [AE LOCK ONLY]
  • [AF LOCK ONLY]
  • [AE/AF LOCK]
  • [AF-ON]
  • [AWB LOCK ONLY]
  • [APERTURE SETTING]
  • [LOCK SETTING]
  • [PERFORMANCE]
  • [AUTO IMAGE TRANSFER]
  • [SELECT PAIRING DESTINATION]
  • [Bluetooth ON/OFF]
  • [QUICK MENU]
  • [PLAYBACK]
  • [NONE]

To disable the function button, choose [NONE].

Selected function lock is not available when [CONSTANT SPEED ZOOM (T)] or [CONSTANT SPEED ZOOM (W)] is assigned to a lens function button (a[LOCK]).