DThe Setup Menus ([CONNECTION SETTING])
Adjust settings for connection to other devices.
To access connection settings, press [MENU]/[OK], select the D ([SET UP]) tab, and choose [CONNECTION SETTING].
For more information on wireless connections, visit:
- [Bluetooth SETTINGS]
- [PC AUTO SAVE]
- [instax PRINTER CONNECTION SETTING]
- [CONNECTION MODE]
- [GENERAL SETTINGS]
- [RESET WIRELESS SETTING]
Adjust Bluetooth settings.
|[PAIRING REGISTRATION]||To pair the camera with a smartphone or tablet, select this option, then launch [FUJIFILM Camera Remote] on the smart device and tap [PAIRING REGISTRATION].|
|[SELECT PAIRING DESTINATION]||Choose a connection from a list of devices with which the camera has been paired using [PAIRING REGISTRATION]. Select [NO CONNECTION] to exit without connecting.|
|[DELETE PAIRING REG.]||Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in [SELECT PAIRING DESTINATION].|
|[Bluetooth DEVICE LIST]||List the devices with which the camera is paired (other than the smartphone) or end pairing with selected devices.|
[ON]: The camera automatically establishes a Bluetooth connection with paired devices when turned on.
[OFF]: The camera does not connect via Bluetooth.
|[AUTO IMAGE TRANSFER]||
[ON]: Mark photos for upload as they are taken. Mark JPEG photos for upload as they are taken.
[OFF]: Photos are not marked for upload as they are taken.
|[SMARTPHONE SYNC. SETTING]||
Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.
[LOCATION&TIME]: Synchronize the time and location.
[LOCATION]: Synchronize the location.
[TIME]: Synchronize the time.
[OFF]: Synchronization off.
Install the latest version of the [FUJIFILM Camera Remote] app on your smartphone or tablet before pairing the device with your camera or uploading images.
When [ON] is selected for both [Bluetooth ON/OFF] and [AUTO IMAGE TRANSFER] or images are currently selected for upload using the [IMAGE TRANSFER ORDER] option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. [IMAGE TRANSER ORDER] can also be used to select pictures for upload when [AUTO IMAGE TRANSFER] is off.
[PC AUTO SAVE]
Adjust settings for connection to computers via wireless LAN.
|[PC AUTO SAVE SETTING]||
Choose the method used for connection to computers via a wireless LAN.
[SIMPLE SETUP]: Connect using WPS.
[MANUAL SETUP]: Choose the network from a list ([SELECT FROM NETWORK LIST]) or enter the name manually ([ENTER SSID]).
|[DELETE REGISTERED DESTINATION PC]||Remove selected destinations.|
|[DETAILS OF PREVIOUS CONNECTION]||View computers to which the camera has recently connected.|
[instax PRINTER CONNECTION SETTING]
Adjust settings for connection to optional Fujifilm instax SHARE printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
Adjust settings for connection to external devices.
|[USB CARD READER]||Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.|
|[X WEBCAM]||The camera can be used as a webcam when connected to a computer running FUJIFILM X Webcam.|
|[USB MOVIE SHOOTING AUTO] *||The camera's movie-recording features can be controlled from gimbals, drones, or other devices connected via USB. The camera automatically enters “tethered shooting” (i.e., remote-control) mode when the external device is turned on and returns to normal operation when the external device turned off or disconnected. The features available vary with the type of device connected.|
|[USB MOVIE SHOOTING FIXED] *||As for [USB MOVIE SHOOTING AUTO], except that the camera remains in “tethered shooting” (remote-control) mode when the external device is off or not connected, allowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption.|
|[USB RAW CONV./BACKUP RESTORE]||
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.
[USB RAW CONV.] (requires [FUJIFILM X RAW STUDIO]): Use the camera’s image processing engine to rapidly convert RAW files to high-quality JPEG images.
[BACKUP RESTORE] (requires [FUJIFILM X Acquire]): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.
* Rotate the drive dial to F (movie).
D[POWER MANAGEMENT] > [AUTO POWER OFF] settings also apply when the camera is connected to an external device. To prevent the camera turning off automatically, select [OFF] for [AUTO POWER OFF].
Visit the websites below to learn more about or download the following computer software:
Adjust settings for connection to wireless networks.
|[NAME]||Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default).|
|[RESIZE IMAGE FOR SMARTPHONE] H||
Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
[ON]: Larger images are resized to H for upload. This setting is recommended.
[OFF]: Images are uploaded at their original size.
|[GEOTAGGING]||Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.|
|[LOCATION INFO]||Display the location data last downloaded from a smartphone.|
Choose the role played by function buttons assigned the [WIRELESS COMMUNICATION] function.
s[PAIRING/TRANSFER ORDER]: The buttons can be used for pairing and selecting images for transfer.
r[WIRELESS COMMUNICATION]: The buttons can be used for wireless connections.
View the camera’s MAC and Bluetooth address.
[RESET WIRELESS SETTING]
Restore wireless settings to their default values.