Enter a search term and click .

AExposure compensation dial

BShutter button

C[Fn1] button

DShutter speed dial

EDial lock release

FHot shoe

GMicrophone

HDiopter adjustment control

ISensitivity dial

JDrive dial

KStrap eyelet

LSync terminal

MConnector cover (detachable)

NFocus mode selector

OLens signal contacts

PLens release button

Q[Fn2] button

RAF-assist illuminator
Self-timer lamp

SMetering dial

TFront command dial

U[ON]/[OFF] switch

VHot shoe cover

WBody cap

XMicrophone jack (Φ 3.5 mm)

YHeadphone jack (Φ 3.5 mm)

ZUSB connector (Type-C)

aHDMI Micro connector (Type D)


bb (delete) button

ca (playback) button

dElectronic viewfinder (EVF)

eEye cup

f[VIEW MODE] button

g[AE-L] (exposure lock) button

hRear command dial

i[AF-L] (focus lock) button

jIndicator lamp

k[Q] (quick menu) button

lRemote release connector cover

mMemory card slot cover

nFocus stick (focus lever)

oMemory card slot cover latch

pSelector buttons

q[MENU]/[OK] button

r[DISP] (display)/[BACK] button

sSpeaker

tBattery-chamber cover latch

uBattery-chamber cover

vTripod mount

wVertical battery grip connector cover

xLCD monitor
Touch screen

yEye sensor

zRemote release connector (Φ 2.5 mm)

0Memory card slot 1 and 2

1Battery latch

2Battery chamber

The Serial Number Plate

Do not remove the serial number plate, which provides the FCC ID, KC mark, CMIIT ID, serial number, and other important information.

Serial number plate

The Selector

Press the selector up (e), right (h), down (f), or left (g) to highlight items. The up, right, down, and left buttons also double as function buttons [Fn3] through [Fn6] (aThe [Fn] (Function) Buttons).

The Focus Stick (Focus Lever)

Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus.

The Shutter Speed and Sensitivity Dials

Press the dial lock release to release the dial before rotating it to the desired setting. Press the release again to lock the dial in place.

Shutter speed

Sensitivity

The Metering Dial

Rotate the dial to choose the metering mode.

The Connector Cover (Detachable)

Slide the latch down to remove the cover.

The Drive Dial

Rotate the dial to choose from the following the drive modes.

Mode
F Movie (aRecording Movies)
BKT Bracketing (aBKT Bracketing)
CH High-speed burst (aContinuous Shooting (Burst Mode))
CL Low-speed burst (aContinuous Shooting (Burst Mode))
S Single frame (aTaking Photographs (Mode [P]))
j Multiple exposure (aMultiple exposures)
ADV. Advanced filter (aADV. Advanced Filters)
u Panorama (aPanoramas)

The Exposure Compensation Dial

Rotate the dial to choose an exposure compensation amount.

The Command Dials

Rotate or press the command dials to:

Rotate

Select menu tabs or page through menus

Adjust aperture 1, 2

Adjust exposure compensation 5

Adjust sensitivity 2, 3

View other pictures during playback

Press

Switch back and forth between aperture and sensitivity 2, 3, 6

Press and hold to choose the option selected for D[BUTTON/DIAL SETTING] > [COMMAND DIAL SETTING] in the D (setup) menu

1 Aperture set to [A] (auto) and lens equipped with aperture ring or [COMMAND] selected for D[BUTTON/DIAL SETTING] > [APERTURE RING SETTING (A)].

2 Can be changed using D[BUTTON/DIAL SETTING] > [COMMAND DIAL SETTING].

3 ISO dial set to [A] and [COMMAND] selected for D[BUTTON/DIAL SETTING] > [ISO DIAL SETTING (A)].

4 Available only if [FOCUS CHECK] is assigned to a function button.

5 Exposure compensation dial rotated to [C].

6 Can be used to switch back and forth between aperture, sensitivity, and exposure compensation when exposure compensation dial is rotated to [C].

Rotate

Highlight menu items

Choose the desired combination of shutter speed and aperture (program shift)

Choose a shutter speed 2

Adjust settings in the quick menu

Choose the size of the focus frame

Zoom in or out in full frame playback

Zoom in or out in multi-frame playback

Press

Perform the function assigned to the DIAL function button

Zoom in on the active focus point 4

Press and hold to choose the manual focus mode focus display 4

Zoom in on the active focus point during playback

1 Aperture set to [A] (auto) and lens equipped with aperture ring or [COMMAND] selected for D[BUTTON/DIAL SETTING] > [APERTURE RING SETTING (A)].

2 Can be changed using D[BUTTON/DIAL SETTING] > [COMMAND DIAL SETTING].

3 ISO dial set to [A] and [COMMAND] selected for D[BUTTON/DIAL SETTING] > [ISO DIAL SETTING (A)].

4 Available only if [FOCUS CHECK] is assigned to a function button.

5 Exposure compensation dial rotated to [C].

6 Can be used to switch back and forth between aperture, sensitivity, and exposure compensation when exposure compensation dial is rotated to [C].

The Indicator Lamp

Camera status is shown by the indicator lamp.

Indicator lamp Camera status
Glows green Focus locked.
Blinks green Focus or slow shutter speed warning. Pictures can be taken.
Blinks green and orange

Camera on: Recording pictures. Additional pictures can be taken.

Camera off: Uploading pictures to a smartphone or tablet. *

Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks orange Flash charging; flash will not fire when picture is taken.
Blinks red Lens or memory error.

* Displayed only if pictures are selected for upload.

Warnings may also appear in the display.

The indicator lamp remains off while your eye is to the viewfinder.

The F[MOVIE SETTING] > [TALLY LIGHT] option can be used to choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady.

The LCD Monitor

The LCD monitor can be tilted for easier viewing, but be careful not to touch the wires or trap fingers or other objects behind the monitor. Touching the wires could cause camera malfunction.

“Tall” (Portrait) Orientation

The display can also be tilted to take pictures from high or low angles when the camera is rotated to take pictures in “tall” (portrait) orientation.

Press the tilt lock release and tilt the display as shown in Figure 1.

To take high-angle shots, hold the camera in the orientation shown in Figure 2.

Figure 1

Figure 2