Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
Press the [DRIVE/DELETE] button and select [CH HIGH SPEED BURST] or [CL LOW SPEED BURST] in the drive-mode menu.
Choose the frame advance rate and press the shutter button to start shooting.
Shooting ends when the shutter button is released or the memory card is full.
Frame advance rates of 10 fps or faster are available only when s [ELECTRONIC SHUTTER] is selected for A [SHOOTING SETTING] > [SHUTTER TYPE].
If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder.
Shooting ends when the memory card is full; the camera will record all photos shot to that point. Burst shooting may not begin if the space available on the memory card is insufficient.
Frame rates may slow as more shots are taken.
Frame rate varies with the scene, shutter speed, sensitivity, and focus mode.
Depending on shooting conditions, frame rates may slow or the flash may not fire.
Recording times may increase during burst shooting.
Focus and Exposure
- To vary focus with each shot, select [CONTINUOUS AF] for G [AF/MF SETTING] > [FOCUS MODE].
- To vary exposure with each shot, select [OFF] for D [BUTTON/DIAL SETTING] > [SHUTTER AE].
Depending on such factors as aperture, sensitivity, and exposure compensation, exposure may not be adjusted automatically.