This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Automatically vary settings over a series of pictures.

  1. Press the selector down (I) to display bracketing options.

  2. Press the selector up or down to highlight one of the following:

    Option
    O[AE BKT]
    W[ISO BKT]
    X[FILM SIMULATION BKT]
    V[WHITE BALANCE BKT]
    Y[DYNAMIC RANGE BKT]
    h[HDR]
  3. Press the selector left or right to highlight the desired bracketing settings and press [MENU/OK] to select the highlighted option.

    Bracketing settings for AE and film simulation bracketing are selected using the S[AE BKT SETTING] and X[FILM SIMULATION BKT] options in the shooting menu.

  4. Take pictures.

O[AE BKT]

Use S[AE BKT SETTING] to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount (a AE BKT SETTING).

Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.

W[ISO BKT]

Select a bracketing amount (±1, ±2/3, or ±1/3). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount.

X[FILM SIMULATION BKT]

Each time the shutter is released, the camera takes one shot and processes it to create a total of three copies with different film simulation settings, chosen using the X[FILM SIMULATION BKT] option in the shooting menu (a FILM SIMULATION BKT).

V[WHITE BALANCE BKT]

Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.

Y[DYNAMIC RANGE BKT]

Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third.

While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends.

h[HDR]

Each time the shutter button is pressed, the camera takes multiple shots at different exposures and combines them into a single high–dynamic-range image, reducing loss of detail in highlights and shadows. Choose the amount the camera varies exposure from [AUTO], [1.0 EV], [1.5 EV], [2.0 EV], [2.5 EV], and [3.0 EV].

Keep the camera steady. If the camera is moved or the subject changes during shooting, the shots may be recorded separately instead of being combined into a single image. The camera may fail to record an image if the subject moves during shooting.

The camera displays the combined image after shooting. Press [MENU/OK] to save the image or [DISP/BACK] to end HDR shooting without recording the image.