• The Setup Menus
• The Setup Menus ([CONNECTION SETTING])

Enter a search term and click .

Adjust settings for connection to other devices.

---

• [WIRELESS SETTINGS]
• [GEOTAGGING SET-UP]
• [instax PRINTER CONNECTION SETTING]
• [PC CONNECTION MODE]
• [INFORMATION]

[WIRELESS SETTINGS]

Adjust settings for connection to wireless networks.

Option	Description
[GENERAL SETTINGS]	Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default) or select [RESET WIRELESS SETTINGS] to restore default settings.
[RESIZE IMAGE FOR SMARTPHONE] H	Choose [ON] (the default setting, recommended in most circumstances) to resize larger images to H for upload to smartphones, [OFF] to upload images at their original size. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
[ACCESS POINT SETTINGS]	[SIMPLE SETUP]: Connect to an access point using simple settings. [MANUAL SETUP]: Manually adjust settings for connection to a wireless network. Choose the network from a list ([SELECT FROM NETWORK LIST]) or enter the name manually ([ENTER SSID]).
[IP ADDRESS]	[AUTO]: The IP address is assigned automatically. [MANUAL]: Assign an IP address manually. Manually choose the IP address ([IP ADDRESS]), network mask ([NETMASK]), and gateway address ([GATEWAY ADDRESS]).

[GEOTAGGING SET-UP]

View location data downloaded from a smartphone and choose whether to save the data with your pictures.

Option	Description
[GEOTAGGING]	Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.
[LOCATION INFO]	Display the location data last downloaded from a smartphone.

[instax PRINTER CONNECTION SETTING]

Adjust settings for connection to optional [FUJIFILM instax SHARE] printers.

[PC CONNECTION MODE]

Adjust settings for connection to a computer.

Option	Description
[USB CARD READER]	Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.
[USB TETHER SHOOTING AUTO]	The camera can be controlled from a computer connected via USB. Photographs can be taken remotely and automatically downloaded to computers running Capture One, Adobe® Photoshop® Lightroom® + Tether Plugin, or FUJIFILM X Acquire. FUJIFILM X Acquire can also be used to save and load camera settings. The camera functions normally when not connected.
[USB TETHER SHOOTING FIXED]	As for [USB TETHER SHOOTING AUTO], except that the camera remains in “tethered shooting” mode when the computer is not connected, allowing the computer to resume control when the connection is re-established after an accidental disconnection or other disruption. Note that at default settings, pictures are not recorded to the memory card.
[WIRELESS TETHER SHOOTING FIXED]	Choose this option for wireless remote photography. Select a network using D[CONNECTION SETTING] > [WIRELESS SETTINGS].
[USB RAW CONV./BACKUP RESTORE]	Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected. [USB RAW CONV.] (requires FUJIFILM X RAW STUDIO): Use the camera’s image processing engine to rapidly convert RAW files to high-quality JPEG images. [BACKUP RESTORE] (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.

[INFORMATION]

View the camera’s MAC address.