Enter a search term and click .

The camera can be used with lenses for the FUJIFILM G-mount.


Lens Parts

ALens hood

BMounting marks

CFocus ring

DAperture ring lock release

EMounting marks (focal length)

FAperture ring

GLens signal contacts

HFront lens cap

IRear lens cap

A GF63mmF2.8 R WR lens is used here for illustrative purposes.

Lens Care

  • Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied.
  • Replace the front and rear caps when the lens is not in use.

Removing Lens Caps

Remove lens caps as shown.

Lens caps may differ from those shown.

Attaching Lens Hoods

When attached, lens hoods reduce glare and protect the front lens element.

Aperture ring

Rotate the lens aperture ring to choose the aperture (f-number).

Aperture ring

Aperture ring lock release

Setting Description
[C] Set aperture to the value chosen with the camera command dial.
[A] Set aperture to the value chosen automatically by the camera.
Other values Set aperture to the selected value.

To select [C] or [A], or to select another value after selecting [C] or [A], press the aperture ring lock release while rotating the aperture ring.

Lenses with No Aperture Rings

The method used to adjust aperture can be selected using D[BUTTON/DIAL SETTING] > [APERTURE SETTING]. When an option other than [AUTO] is selected, aperture can be adjusted using the front command dial.

Aperture control defaults to the front command dial, but can be reassigned to the rear command dial using D[BUTTON/DIAL SETTING] > [COMMAND DIAL SETTING].

T/S Lenses

View the shift amount or rotate amount of lenses on the EVF or LCD (aCustomizing the Standard Display). The shift and rotate amounts are displayed in increments of 0.5 mm and 3°, respectively.

The shift amount and rotate amount are also recorded to the EXIF data of images that have been taken.