.MONITOR SETTING
Adjust display settings.
SDI/HDMI OUTPUT SETTING
Adjust settings for footage output to the SDI OUT and HDMI OUT connectors.
SDI OUTPUT SETTING
Set whether to output footage to the SDI OUT connector.
| Options | |
|---|---|
| ON | OFF |
SDI REC CONTROL
Set whether to output movie start and stop signals from the SDI OUT connector in conjunction with the REC button.
| Options | |
|---|---|
| ON | OFF |
HDMI OUTPUT
Set whether to output footage to the HDMI OUT connector.
| Options | |
|---|---|
| ON | OFF |
HDMI REC CONTROL
Set whether to output movie start and stop signals from the HDMI OUT connector in conjunction with the REC button.
| Options | |
|---|---|
| ON | OFF |
SDI/HDMI OUTPUT INFO DISPLAY
Set whether to output the information displayed on the LCD monitor to the SDI OUT or HDMI OUT connectors.
| Options | |
|---|---|
| ON | OFF |
SDI/HDMI OUTPUT RESOLUTION
Set the resolution of the footage output to the SDI OUT or HDMI OUT connectors.
| Options | |||
|---|---|---|---|
| 8K | 4K | 4K DCI | FHD |
This is a common setting with SDI/HDMI OUTPUT SETTING > SDI/HDMI OUTPUT RESOLUTION in the playback menu.
When PROJECT > RESOLUTION is set to 8K, and MEDIA REC SETTING > REC MEDIA in PROJECT is set to SDI/HDMI OUTPUT ONLY, you can select 8K, 4K, 4K DCI, or FHD.
When PROJECT > RESOLUTION is set to 4K, you can select 4K, 4K DCI, or FHD.
SDI/HDMI OUTPUT FPS
Set the frame rate of footage output to the SDI OUT or HDMI OUT connectors.
| Options | |
|---|---|
| PROJECT FPS | RECORDING FPS |
WAVEFORM/VECTORSCOPE
Choose whether to display chrominance and luminance signals during movie recording.
WAVEFORM
A waveform is displayed.
PARADE
An RGB parade is displayed.
VECTORSCOPE
A vectorscope is displayed.
RGB HISTOGRAM
An RGB histogram is displayed.
HISTOGRAM
A histogram is displayed.
OFF
Neither a waveform monitor, a parade, a vectorscope, nor a histogram is displayed.
Press SCREEN SET-UP (Screen button 6) to change the pattern of each display. When a parade is selected, press SCREEN SET-UP (Screen button 6) and then COLOR/MONOCHROME (Screen button 6) to choose whether to display in color or gray.
FOCUS PEAK HIGHLIGHT
The camera heightens high-contrast outlines when using manual focus. This allows you to check whether the subject is in focus.
SCREEN SET-UP
Select a combination of outline color and peaking level.
| Options | ||
|---|---|---|
| WHITE(LOW) | WHITE(HIGH) | RED(LOW) |
| RED(HIGH) | BLUE(LOW) | BLUE(HIGH) |
| YELLOW(LOW) | YELLOW(HIGH) | OFF |
INTERLOCK MF ASSIST & FOCUS RING
If ON is selected, display the information set using SCREEN SET-UP only when the focus ring is rotated in manual focus.
| Options | |
|---|---|
| ON | OFF |
ZEBRA SETTING
Set whether to display highlights that may be overexposed by zebra stripes.
SCREEN SET-UP
Set whether to display zebra stripes.
| Options | ||
|---|---|---|
| ZEBRA RIGHT | ZEBRA LEFT | OFF |
ZEBRA LEVEL
Choose the brightness threshold for the zebra stripe display.
| Options | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 |
FRAMING GUIDELINE
Set a framing grid for shooting mode.
FRAMING GUIDELINE DISP
Set whether to display a framing grid.
| Options | |
|---|---|
| ON | OFF |
FRAME1, FRAME2, FRAME3
Set three types of frames individually.
FRAME1 DISP, FRAME2 DISP, FRAME3 DISP
Set whether to display a frame.
| Options | |
|---|---|
| ON | OFF |
ASPECT RATIO
Set the aspect ratio of the frame.
| Options | |||
|---|---|---|---|
| CUSTOM | 2.39:1 | 17:9 | 16:9 |
| 5:4 | 4:3 | 3:2 | 1:1 |
CUSTOM ASPECT
Customize the aspect ratio of the frame.
SCALE
Adjust the magnification of the frame. Set the magnification of the frame from 1 % to 100% in 1 % increments.
COLOR
Set the color of the frame.
| Options | ||||
|---|---|---|---|---|
| BLACK | WHITE | YELLOW | MAGENTA | CYAN |
FRAMELINE
Set the thickness of the frame lines.
| Options | |||
|---|---|---|---|
| 1(THIN) | 2 | 3 | 4(THICK) |
MASK SETTING
Set how the areas that are not captured are displayed.
MASK DISP
Set whether to mask the areas that are not captured.
| Options | |
|---|---|
| ON | OFF |
MASK FRAME SELECT
Select the type of mask display.
| Options | ||
|---|---|---|
| FRAME1 | FRAME2 | FRAME3 |
MASK TRANSPARENCY
Set the transparency of the mask display. The transparency can be adjusted between 10 % and 100 % in 10 % increments.
CENTERMARKER SETTING
Set the center marker.
CENTERMARKER DISP
Set whether to display the center marker.
| Options | |
|---|---|
| ON | OFF |
CENTERMARKER PATTERN
Set the type of center marker.
| Options | |||
|---|---|---|---|
| PATTERN1 | PATTERN2 | PATTERN3 | PATTERN4 |
COLOR
Set the color of center marker.
| Options | ||||
|---|---|---|---|---|
| BLACK | WHITE | YELLOW | MAGENTA | CYAN |
FRAMELINE
Set the thickness of the center marker lines.
| Options | |||
|---|---|---|---|
| 1(THIN) | 2 | 3 | 4(THICK) |
ELECTRONIC LEVEL SETTING
Adjust settings for use when recording movies using the virtual horizon display.
| Option | Description |
|---|---|
| 2D | A white line shows the amount the camera is tilted left or right. The line turns green when the camera is level. The line may vanish if the camera is tilted forward or back. |
| 3D | The display shows whether the camera is tilted left or right and forward or back. |
| OFF | The virtual horizon is not displayed. |
REC FRAME
If ON is selected, the borders of the display will turn red during movie recording.
| Options | |
|---|---|
| ON | OFF |
DISP. CUSTOM SETTING
Select the items to be displayed on the LCD monitor in shooting mode.
The available items are as follows:
- AF FOCUS FRAME
- MANUAL FOCUS FRAME
- AF DISTANCE INDICATOR
- MF DISTANCE INDICATOR
- FOCUS MODE
- FOCUS INDICATOR
- PHOTOMETRY
- SHUETTER
- IRIS
- EXP. COMPENSATION
- ISO
- ND
- WHITE BALANCE
- IMAGE FORMAT
- RESOLUTION
- PROJECT FPS
- RECORDING FPS
- FILE FORMAT
- MEDIA REC SETTING&MOVIE COMPRESSION FORMAT
- CROP MAGNIFICATION
- LOOK MEDIA
- LOOK LCD
- LOOK SDI/HDMI
- CLIP&REEL
- CAMERA STATUS
- REC. TIME
- Genlock
- TIME CODE
- COOLING FAN
- IS MODE
- SELF-TIMER
- MIC LEVEL
- Bluetooth STATUS
- Wi-Fi/Ethernet STATUS
- REMOTE REC FUNCTION STATUS
- Frame.io STAUS
- IMAEG TRANSFER STATUS
- MEDIA RECORDING TIME
- BATTERY AGE
- EXTERNAL BATTERY INFO
- TOUCH AF OFF BUTTON
- POWERZOOM
- GUIDANCE MESSAGE
FOCUS SCALE UNITS
Choose the units used for the focus distance indicator.
| Options | |
|---|---|
| METERS | FEET |
LCD INVERSION SETTING
Flip the LCD monitor display vertically and horizontally.
| Option | Description |
|---|---|
| NORMAL | The display is not flipped. |
| INVERSION1 | The display is flipped both vertically and horizontally. |
| INVERSION2 | The display is flipped horizontally. |
| INVERSION3 | The display is flipped vertically. |
