Warning Messages and Displays

The following warnings appear in the display.

Warning	Description
i (red)	Low battery. Charge the battery or insert a fully-charged spare battery.
j (blinks red)	Battery exhausted. Charge the battery or insert a fully-charged spare battery.
s (displayed in red with red focus frame)	The camera cannot focus. Use focus lock to focus on another subject at the same distance, then recompose the picture.
Aperture or shutter speed displayed in red	The subject is too bright or too dark and the picture will be over- or under-exposed. Use the flash for additional lighting when taking photographs of poorly-lit subject.
[FOCUS ERROR]	Camera malfunction. Turn the camera off, remove the lens, and check for foreign matter between the lens and the camera body, then replace the lens and turn the camera on. If the problem persists, contact a Fujifilm dealer.
[LENS CONTROL ERROR]
[TURN OFF THE CAMERA AND TURN ON AGAIN]
[CARD NOT INITIALIZED]	The memory card is not formatted or the memory card has been formatted in a computer or other device: Format the memory card using D[USER SETTING] > [FORMAT]. The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. Camera malfunction: Contact a Fujifilm dealer.
[LENS ERROR]	Turn the camera off, remove the lens, and check for foreign matter between the lens and the camera body, then replace the lens and turn the camera on. If the problem persists, contact a Fujifilm dealer.
[CARD ERROR]	The memory card is not formatted for use in the camera: Format the card. The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. Incompatible memory card: Use a compatible card. Camera malfunction: Contact a Fujifilm dealer.
[PROTECTED CARD]	The memory card is locked. Unlock the card.
[BUSY]	The memory card is incorrectly formatted. Use the camera to format the card.
b[MEMORY FULL]	The memory card is full and pictures cannot be recorded. Delete pictures or insert a memory card with more free space.
[WRITE ERROR]	Memory card error or connection error: Reinsert the card or turn the camera off and then on again. If the message persists, contact a Fujifilm dealer. Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. The memory card is not formatted: Format the memory card. The memory card was removed while data were being recorded: Do not remove the memory card during recording. The memory card write speed is slow: When recording movies, be sure the memory card write speed is fast enough.
[FRAME NO. FULL]	The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select [RENEW] for D[SAVE DATA SET-UP] > [FRAME NO.]. Take a picture to reset frame numbering to 100-0001, then select [CONTINUOUS] for [FRAME NO.].
[READ ERROR]	The file is corrupt or was not created with the camera: The file cannot be viewed. The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. Camera malfunction: Contact a Fujifilm dealer.
[PROTECTED FRAME]	An attempt was made to delete or rotate to a protected picture. Remove protection and try again.
[CAN NOT CROP]	The picture is damaged or was not created with the camera.
[DPOF FILE ERROR]	Print orders can contain no more than 999 pictures. Copy any additional pictures you wish to print to another memory card and create a second print order.
[CAN NOT SET DPOF]	The picture cannot be printed using DPOF.
F[CAN NOT SET DPOF]	Movies cannot be printed using DPOF.
[CAN NOT ROTATE]	The selected picture cannot be rotated.
F[CAN NOT ROTATE]	Movies cannot be rotated.
F[CANNOT EXECUTE]	The selected operation is not supported: Check whether the picture was recorded with a different model of camera.
m[CANNOT EXECUTE]
p (yellow) [CAMERA IS APPROACHING STANDARD TEMPERATURE LIMIT]	The camera is approaching the maximum temperature allowed when [STANDARD] is selected for [AUTO POWER OFF TEMP.] and will shortly turn off automatically. Turn the camera off and wait for it to cool.
p (yellow) [CAMERA IS APPROACHING HIGH TEMPER- ATURE LIMIT.DO NOT HOLD CAMERA FOR LONG PERIODS OF TIME]	The camera is approaching the maximum temperature allowed when [HIGH] is selected for [AUTO POWER OFF TEMP.] and will shortly turn off automatically. Remaining in contact with the camera could result in low-temperature burns; mount the camera on a tripod or take other steps to avoid prolonged contact with the camera. The camera will shortly turn off automatically. Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
p (red) [HIGH TEMPERATURE LIMIT REACHED SHUTTING DOWN]	The camera temperature has reached the cutoff point and the camera is about to turn off automatically. Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.