.Tethered Photography
Computers connected via USB or wireless LAN can be used to control the camera and take photographs remotely or to download pictures from the camera for storage.
Tethered Photography via USB
Connect the camera to a computer via USB for tethered photography.
-
Select either [AUTO] or [POWER SUPPLY OFF/COMM ON] for [USB POWER SUPPLY/COMM SETTING] in the network/USB setting menu.
-
Select [USB TETHER SHOOTING AUTO] or [USB TETHER SHOOTING FIXED] for [CONNECTION MODE].
if [USB TETHER SHOOTING AUTO] is selected, tethered photography will be enabled automatically when the computer to which the camera is connected is turned on. When the computer is off or not connected, tethered photography will be suspended and pictures will be saved to the camera memory card.
If the camera is disconnected from the computer while [USB TETHER SHOOTING FIXED] is selected, it will continue to function in tethered mode and no pictures will be recorded.
-
Connect the camera to the computer via USB and then turn the camera on (aConnecting to a Computer).
-
Take pictures via tethered photography.
Use software such as “FUJIFILM TETHER APP” or “Capture One”.
For more information on tethered photography, visit the website below.
Visit the website below for information on the software used.
When the camera is connected to a compatible device such as a gimbal or drone, the camera can be controlled from the gimbal or drone.
Tethered Photography via Wireless LAN
Connect the camera to a computer via wireless LAN for tethered photography.
-
Connect the camera to a wireless LAN using [NETWORK SETTING] in the network/USB setting menu.
-
Select [WIRELESS TETHER SHOOTING FIXED] for [CONNECTION MODE].
-
Take pictures via tethered photography.
Use software such as “FUJIFILM TETHER APP”.
For more information on tethered photography, visit the website below.
Visit the website below for information on the software used.
