RAW FILE CONVERTER EX 3.0 powered by SILKYPIX
Windows Version: 8.1.16.0
Last Updated: 09.24.2024
Mac Version: 8.1.16.0
Last Updated: 09.24.2024
Overview
This software is made by “Adwaa Co., Ltd.”. When you install it, you need to accept “Adwaa Co., Ltd. License Agreement”.
* Support for the RAW FILE CONVERTER EX or RAW FILE CONVERTER EX2.0 powered by SILKYPIX has been discontinued. This software can be used with models that are compatible with the old RAW FILE CONVERTER EX or RAW FILE CONVERTER EX2.0.
Compatibility
RAW FILE CONVERTER EX3.0 compatibility chart
【NEWS】
・RAW FILE CONVERTER EX3.0” compatible with FUJIFILM GFX100S II and X-T50 will be released in late September 2024.
・We are currently verifying operation with macOS 15 (Sequoia).
If you plan to continue using “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX”, please refrain from updating to macOS 15 (Sequoia).
NOTES
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
- In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
- In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
Windows
Mac
Detail of the software update
The software update Ver.8.1.16.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM GFX100s II, X-T50
The software update Ver.8.1.15.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM X100VI
The software update Ver.8.1.14.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM GFX100 II
The software update Ver.8.1.13.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM X-S20
The software update Ver.8.1.12.1 incorporates the following issue:
-
The software bug has been fixed, which caused that the color adjustment with “Color temperature” for “White balance’ did not work well with some Raw data taken by the following models.
- FUJIFILM X-H2S
- FUJIFILM X-H2
- FUJIFILM X-T5
The software update Ver.8.1.12.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM X-T5
The software update Ver.8.1.11.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM X-H2S, X-H2
The software update Ver.8.1.10.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM GFX 50S II, X-T30 II
The software update Ver.8.1.9.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM GFX100 Ver.4.00
(Compatibility with FILM SIMULATION > CLASSIC Neg. is added.)
The software update Ver.8.1.8.0 incorporates the following issues:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM GFX100S, X-E4
-
Fix of slight defects.
The software update Ver.8.1.7.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-S10
The software update Ver.8.1.6.0 incorporates the following issues:
-
Compatibility with the new Film Simulation below intorduced to GFX100, GFX50S and GFX50R is added.
1)CLASSIC Neg (GFX100, GFX50S and GFX50R)
2)ETERNA/CINEMA (GFX50S and GFX50R. Already available in GFX100.)
3)ETERNA Bleach Bypass (GFX100)*The new Film Simulation is available with the firmware of GFX100 Ver.2.00, GFX50S Ver.4.00 and GFX50R Ver.2.00.
GFX100 Camera Body Firmware Update
GFX 50S Camera Body Firmware Update
GFX 50R Camera Body Firmware Update -
Compatibility with RECORDING TYPE (COMPRESSED) in RAW RECORDING is added. (GFX100)
The software update Ver.8.1.5.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-T4
The software update Ver.8.1.4.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-Pro3, X100V
The software update Ver.8.1.3.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-Pro3
The software update Ver.8.1.2.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-A7
The software update Ver.8.1.1.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM GFX100
The software update Ver.8.1.0.0 incorporates the following issue:
-
The sign to show that the software is provided by ”Ichikawa Soft Laboratory” is displayed on the background of the RFC EX3.0.
The software update Ver.8.0.2.0 incorporates the following issues:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-T30
-
Fix of slight defects.
The software update Ver.8.0.1.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM GFX 50R
How to Install
- Download the dmg file from this page.
- Double click the downloaded dmg file to mount the volume and the volume will be displayed.
- Double-click the installer app to run setup. Install it following directions appeared on dialogs.
- Once the installation is completed, click “Complete” button in the dialog appeared.
System Requirements
OS | macOS 14, 13, 12, 11, 10.15, 10.14, 10.13 |
Download
RAW FILE CONVERTER EX 3.0 powered by SILKYPIX License Agreement
Regarding install software
*If you have a inquiry, please contact your local FUJIFILM support center or through “Contact US” below.
*This software is made by “Adwaa Co., Ltd”. When you install it, you need to accept “Adwaa Co., Ltd. License Agreement”.
Notes
- The speaification of the software can be changed without notice.
- FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Detail of the software update
The software update Ver.8.1.16.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM GFX100S II, X-T50
The software update Ver.8.1.15.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM X100VI
The software update Ver.8.1.14.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM GFX100 II
The software update Ver.8.1.13.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM X-S20
The software update Ver.8.1.12.1 incorporates the following issue:
-
The software bug has been fixed, which caused that the color adjustment with “Color temperature” for “White balance’ did not work well with some Raw data taken by the following models.
- FUJIFILM X-H2S
- FUJIFILM X-H2
- FUJIFILM X-T5
The software update Ver.8.1.12.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM X-T5
The software update Ver.8.1.11.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM X-H2S, X-H2
The software update Ver.8.1.10.0 incorporates the following issue:
-
Applicable models for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” are added.
Applicable Model : FUJIFILM GFX 50S II, X-T30 II
The software update Ver.8.1.9.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM GFX100 Ver.4.00
(Compatibility with FILM SIMULATION > CLASSIC Neg. is added.)
The software update Ver.8.1.8.0 incorporates the following issues:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM GFX100S, X-E4
-
Compatibility with macOS11 Big Sur is added. (Rosetta 2)
-
Fix of slight defects.
The software update Ver.8.1.7.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-S10
The software update Ver.8.1.6.0 incorporates the following issues:
-
Compatibility with the new Film Simulation below intorduced to GFX100, GFX50S and GFX50R is added.
1)CLASSIC Neg (GFX100, GFX50S and GFX50R)
2)ETERNA/CINEMA (GFX50S and GFX50R. Already available in GFX100.)
3)ETERNA Bleach Bypass (GFX100)*The new Film Simulation is available with the firmware of GFX100 Ver.2.00, GFX50S Ver.4.00 and GFX50R Ver.2.00.
GFX100 Camera Body Firmware Update
GFX 50S Camera Body Firmware Update
GFX 50R Camera Body Firmware Update -
Compatibility with RECORDING TYPE (COMPRESSED) in RAW RECORDING is added. (GFX100)
The software update Ver.8.1.5.0 incorporates the following issues:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-T4
-
Compatibility with Mac OS is from OS X v10.9 to macOS 10.15.
The software update Ver.8.1.4.0 incorporates the following issues:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-T200, X100V
The software update Ver.8.1.3.0 incorporates the following issues:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-Pro3
-
Compatibility with ”macOS 10.15 (Catalina)” is added.
If you use a PC with “macOS 10.15 (Catalina)”, install the latest version(8.1.3.0) of the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX”.
The software update Ver.8.1.2.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM X-A7
The software update Ver.8.1.1.0 incorporates the following issue:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM GFX100
The software update Ver.8.1.0.0 incorporates the following issue:
-
The sign to show that the software is provided by ”Ichikawa Soft Laboratory” is displayed on the background of the RFC EX3.0.
The software update Ver.8.0.2.0 incorporates the following issues:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added. Applicable Model : FUJIFILM X-T30
-
Fix of slight defects.
The software update Ver.8.0.1.0 incorporates the following issues:
-
Applicable model for the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX” is added.
Applicable Model : FUJIFILM GFX 50R
-
Compatibility with “macOS Mojave” is added.
If you use a PC with “macOS Mojave”, install the latest version(8.0.1.0) of the “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX”.
How to Install
- Download the dmg file from this page..
- Double click the downloaded dmg file to mount the volume and the volume will be displayed.
- Double-click the installer app to run setup. Install it following directions appeared on dialogs.
- Once the installation is completed, click “Complete” button in the dialog appeared.
System Requirements
OS | macOS 13, 12, 11, 10.15, 10.14, 10.13 |
Download
RAW FILE CONVERTER EX 3.0 powered by SILKYPIX License Agreement
Regarding install software
*If you have a inquiry, please contact your local FUJIFILM support center or through “Contact US” below.
*This software is made by “Adwaa Co., Ltd”. When you install it, you need to accept “Adwaa Co., Ltd. License Agreement”.
Notes
- The speaification of the software can be changed without notice.
- FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.